COMFORT ADJUSTMENT
61
Locking clip
To install the locking clip, thread the lap and shoulder webbing
through the recesses of the locking clip.
Always remove the locking clip when the child restraint system
is not installed.
If your child restaint system requires the use of top strap, latch
the hook onto the anchor bracket and tighten the top strap.Top strap anchors and locations − On the filler panel behind
the rear seat
Anchor bracketBolt
Spacer
144 (5.7)200 (7.9)
62 (2.4)
62 (2.4)
200 (7.9)144 (5.7)
mm (in.)
a. Using the illustration as a guide, run your fingers across the
trim of the filler panel to locate the position of holes underneath.
b. Make a hole in the covering directly above the hole in the
filler panel.
c. Insert a 15 mm (0.6 in.) spacer for either outside anchor or
a 10 mm (0.4 in.) spacer for the center anchor, and tighten
down the anchor bracket for your child restraint system with a
bolt. Torque the bolt to 16.5 − 24.7 N
.m (1.68 − 2.52 kgf-m, 12.2
− 18.2 ft-Ib).
