\
\
\
\
\
\
\
Fluid Capacities
\
\
\
\
\
\
\
Application Quantity
Automatic Transmission
1987-93 ...................................... 7.6 Qts. (7.2L)
1994 (3.0L SOHC) ............................. 7.6 Qts. (7.2L) \
1994 (3.0L DOHC & 3.5L) ...................... 9.0 Qts. (8.5L) \
1995 ......................................... 7.9 Qts. (7.5L)
Cooling System
1987-88 ...................................... 8.5 Qts. (8.0L)
1989-95
2.6L ........................................ 9.7 Qts. (9.2L)
3.0L ....................................... 10.0 Qts. (9.5L)
1994-95
3.5L ....................................... 10.0 Qts. (9.5L)
Differential
1987-88 ...................................... 1.9 Qts. (1.8L)
1989-94
2.6L ........................................ 1.9 Qts. (1.8L)
3.0L ........................................ 2.7 Qts. (2.6L)
1994
3.5L ........................................ 2.7 Qts. (2.6L)
1995
3.0L ........................................ 2.7 Qts. (2.6L)
3.5L ........................................ 3.3 Qts. (3.2L)
Engine Oil
1987 ......................................... 5.2 Qts. (5.0L)
1988 ......................................... 5.0 Qts. (4.8L)
1989-92 ...................................... 5.5 Qts. (5.3L)
1993-95 ...................................... 5.2 Qts. (4.9L)
Manual Transmission
1987-91 ...................................... 2.3 Qts. (2.2L)
1992 ......................................... 2.4 Qts. (2.3L)
1993-95 ...................................... 2.6 Qts. (2.5L)
Transfer Case
1987-91 ...................................... 2.3 Qts. (2.2L)
1992-95 ...................................... 2.4 Qts. (2.3L)
\
\
\
\
\
\
\
\f
110,000 MILE (176,000 KM) SERVICE (1987-90)
110,000 MILE (176,000 KM) SERVICE (1987-90) \
\
\
\
\
\
\
Service Or Inspect
\
\
\
\
\
\
\
Verify Last Major Service Was Performed
\b\
\
\
\
\
\
\
Fuel System (Tank, Lines & Connections)
\b\
\
\
\
\
\
\
Carburetor Or Throttle Body Mounting
\
\
\
\
\
\
\
Replace
\
\
\
\
\
\
\
Fuel Filter
\b\
\
\
\
\
\
\
Fuel, Water & Vapor Hoses
\b\
\
\
\
\
\
\
EGR Valve
\b\
\
\
\
\
\
\
Oxygen Sensor
\003
K - S EN SO R R AN G E C HAR TS
1991 M it s u bis h i M onte ro
1991 ENGINE PERFORMANCE
Sensor Operating Range Charts
Chrysler Motors: Colt, Colt 200, Colt Vista,
Ram-50, Stealth, Summit,
Mitsubishi: Eclipse, Galant, Mirage, Montero,
Pickup, 3000GT
INTRODUCTION
Sensor operating range information can help determine if a
sensor is out of calibration. An out-of-calibration sensor may not set
a trouble code, but it may cause driveability problems.
SENSOR OPERATING RANGE CHARTS
NOTE: Unless stated otherwise in test procedure, perform all
voltage tests using a Digital Volt-Ohmmeter (DVOM) with a
minimum 10-megohm input impedance. For connector and
terminal identification, see L - WIRING DIAGRAMS article in
the ENGINE PERFORMANCE Section.
COOLANT TEMP SENSOR RESISTANCE TABLE ( 1)
\
\
\
\
Temperature F (C) Ohms
Galant, Montero 3.0L, & Pickup 3.0L
32 (0) ............................. 5900
68 (20) ............................ 2500
104 (40) ........................... 2700
176 (80) ............................ 300
All Others
32 (0) ............................. 5900
68 (20) ............................ 2500
104 (40) ........................... 1100
176 (80) ............................ 300
( 1) - Measure resistance across disconnected
sensor terminals.
\
\
\
\
EGR TEMP SENSOR RESISTANCE TABLE ( 1) ( 2) \
\
\
\
Temperature F (C) Ohms
122 (50) ............................ 60-83
212 (100) .......................... 11-14
( 1) - Measure resistance across disconnected
sensor terminals.
( 2) - Specifications apply to all models
except Montero.
\
\
\
\
INTAKE AIR TEMP SENSOR RESISTANCE TABLE ( 1) \
\
\
\
Temperature F (C) Ohms
32 (0) ............................... 6000
68 (20) .............................. 2700
176 (80) .............................. 400
(1) - On Stealth and 3000GT, measure resistance
between terminals No. 5 and 6 of airflow
sensor connector. On all other models measure
resistance between terminals No. 4 and 6 of
airflow sensor connector.
\
\
\
\
MOTOR POSITION SENSOR RESISTANCE TEST TERMINALS TABLE \
\
\
\
\
\
Application ( 1) Terminals (2) Terminals
Colt Vista ................ 1-3 ............... 1-2
Colt, Colt 200, & Summit .. 2-3 ............... 3-5
( 1) - Measure resistance between terminals of motor
position sensor connector.
( 2) - Apply 6 volts between terminals No. 1 and 2 of
idle speed control (ISC) connector. Check
resistance between terminals of motor position
sensor when ISC motor is activated.
\
\
\
\
\
\
MOTOR POSITION SENSOR RESISTANCE TABLE ( 1) \
\
\
\
\
\
Condition Ohms
Connector Unplugged ....................... 4000-6000
6 Volts Applied ......... Resistance Changes Smoothly
(1) - See MOTOR POSITION SENSOR RESISTANCE
TEST TERMINALS table for terminal positions.
\
\
\
\
\
\
OXYGEN SENSOR VOLTAGE TABLE ( 1) ( 2) \
\
\
\
Application Volts
All Models
Lean ................................ 0.1
Rich ................................ 1.0
(1) - Measure between sensor terminal No. 1
and ground or between terminals No. 1 and 2.
( 2) - Test at normal operating temperature.
\
\
\
\
O2 SENSOR HEATING ELEMENT RESISTANCE TABLE ( 1) \
\
\
\
\
\
\
Application (2) Temperature: F (C) Ohms
Eclipse 2.0L Galant 2.0L, Mirage 1.6L ...... 68 (20) .......... 12\
Montero 3.0L, Pickup 3.0L & Ram-50 3.0L .... 68 (20) .......... 20\
Stealth & 3000GT 3.0L ( 3) .................. 68 (20) .......... 20
( 1) - Measure between sensor terminals No. 3 and 4.
( 2) - Information on other models not available from manufacturer.
( 3) - Stealth and 3000GT turbo models have 2 oxygen sensors.
Measure between sensor terminals No. 2 and 4 on rear sensor.
\
\
\
\
\
\
\