1991 LEXUS SC400 driver seat adjustment

DESCRIPTION
The Power Seat Control System carries out seat slide, front vertical, rear \
vertical, reclining and lumbar support
position adjustments electrically. Power seat switch and lumbar support switch.
In addition, operation of the memory switch makes it possible to store the positions of the slide, front vertical,
rear vertical and reclining adjustments in memory and return to the posi\
tion.
The component parts of this system and their function are described in t\
he following table.
 Parts Name\
 \
Function
 








Driver's Seat ECU
\
 
\


\


\


\

\

The seat ECU controls power operation, memory operation, and position re\
turn
operation of the power seat. When input is received from the power seat \
switch,
the relay inside the ECU is controlled and the power seat operates. The \
seat
memory and position return are controlled by mutual communication betwee\
n the
electrically operated Tilt and Telescopic ECU and the seat ECU.
 

Power Seat Switch\
 
\

\

Operation of this switch sends slide, front vertical, rear vertical, rec\
lining signals
to ECU.
 




Driving Position
Memory and Return
Switch\
 
\


\

\

Memory and Return Signals are sent to the seat ECU via the Tilt and Telescopic
ECU.
 






Lumbar Support
Switch
\
 
\


\


\

\

This switch is supplied with power from the DOOR fuse. When the switch i\
s
operated, power is supplied to the lumbar support motor controlling the \
direction
in which the motor turns and turning the current ON and OFF. This switch is not
connected to the ECU and the adjustment position cannot be stored in mem\
ory
for return operation.
 

Position Sensor
\
 
\

\
This sensor sends signals on the position of each motor (slide, front v\
ertical, rear
vertical and reclining) to the ECU for use in memory and return.
 

*Motor
\
 
\

\

These motors operate on current from the driver's seat ECU moving the various
parts of the seat directly. Each motor has a built±in circuit breaker.
*: Slide, Front Vertical, Rear Vertical, Lumbar Support and Reclining.
Motors contained in each seat are described in the following table.
 Motor Slide Front
Vertical
 Rear
Vertical
 Reclining Lumbar
Support 

Seat 

Motor 


Vertical
Motor
 


Vertical
Motor
 


g
Motor 


Support
Motor
 Driver's Seat O* O* O* O* O
*: Operated by the memory and return functions. BE±266
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName

Parts Adjustment
Adjustment of Headlight Aim
1. INSPECT HEADLIGHT AIM Check the following items before inspection.
wBe sure that the body around the headlight is not
deformed.
w Park the vehicle on a level spot.
w The driver gets into the driver's seat and puts the vehicle
in state ready for driving (with a full tank).
w Bounce the vehicle several times.
(Vertical Direction)
Check that the bubble of the gauge does not deviate from the
center of the gauge.
(Horizontal Direction)
Check that the red mark does not deviate from the center of
the gauge.
If the error is over the valve specified, adjust headlight aim.
2. ADJUST HEADLIGHT AIM (Vertical Direction)
Turn the bolt A and adjust the bubble of angle gauge to center
of the gauge.
HINT: The beam angle will change about 0 519' with one mark.
(Horizontal Direction)
Turn the bolt B and adjust the mark of angle gauge to Center
of the gauge.
HINT: The beam angle will change about 0 538' with one mark.
NOTICE: The beam angle gauge should only be used
when the headlights are correctly installed on the body.
BE±38
±
BODY ELECTRICAL SYSTEM Lighting System
WhereEverybodyKnowsYourName

DESCRIPTION
The combination meter has various meters and gauges which show the vehicle'\
s condition, warning lights which
monitor abnormalities in the vehicle and inform the driver, indicator lights which inform the driver of the condition
of each part of vehicle, and a function for illumination and brightness ad\
justment of meters and gauges.
The component parts of this system and their functions are described in \
the following table.
Parts NameFunction
SpeedometerThe speedometer needle moves in accordance with signals from the speed s\
ensor to
indicate the vehicle's speed.
TachometerThe tachometer needle moves in accordance with signals from the igniter \
to indicate the
engine's speed.
Water Temperatrue
GaugeThe water temperature gauge's needle moves in accordance with signals from the send-
er gauge and indicates the temperature of the engine coolant.
Fuel GaugeThe fuel gauge needle moves in accordance with signals from the sender g\
auge, indicat-
ing the amount of fuel remaining in the fuel tank.
OdometerThe odometer counts the total distance traveled by the vehicle in accord\
ance with pulse
signals from the speed sensor.
Twin Trip Switch
The twin trip meter counts the distance traveled by the vehicle in accor\
dance with pulse
signals from the speed sensor. It can be reset using a switch and can be used to switch
between trip meters A and B.
Circuit Plate
This plate contains the circuitry for each meter and gauge and for each \
warning light and
indicator light, as well as an internal engine oil level warning drive c\
ircuit, drive circuits for
the odometer and trip meter and brightness adjustment circuitry for each\
indicator.
Speed SensorMounted in the transmission, this sensor outputs pulse signals to the co\
mbination meter
in accordance with the speed of the output shaft.
Twin Trip SwitchOperation of this switch switches between the A and B trip meters and se\
nds reset sig-
nals to the combination meter.
Water
Temperature Sender
GaugeThis sender converts engine coolant temperatures to a resistance value i\
n signal form to
the combination meter.
Fuel Sender GaugeThis sender converts the level of fuel remaining in fuel tank to resista\
nce value and
sends the resistance value in signal form to combination meter.
Rheostat Light
Control VolumeIn order to adjust the degree of illumination of the combination meter, the resistance val-
ue of the built±in variable resistor is sent to the combination meter\
and rheostat light
control.
Fuel Level Warning
SwitchWhen the level of fuel remaining falls below a predetermined level, cont\
inuity is estab-
lished with this switch, which is built into the fuel sender gauge, caus\
ing a warning light
to light up.
Low Oil Pressure
Warning SwitchThis switch is mounted on the engine block. Continuity is established in\
this switch when
the oil pressure is low, causing a warning light to light up.
Integration Relay (Seat
Belt Warning Relay)
This relay receives current from fuse GAUGE and DOME and is connected to\
each
buckle switch, door courtesy switch, key unlock warning switch and warni\
ng light. As
part of the seat belt warning system, it sounds a chime and lights a war\
ning light when
seat belts are unfastened. As part of the key unlock warning system, it \
sounds a chime
when the set conditions are fulfilled.
Light Failure SensorThis sensor senses when a bulb in rear combination light is burnt out an\
d lights up a
warning light.
BE±96±
BODY ELECTRICAL SYSTEM Combination Meter
WhereEverybodyKnowsYourName