C1UTCf-f UNtT
9MUOHX-032
I
03UOf-lX-028
I
93GOHX-729
I
i
Removal Note
Clutch cover and disc
1. Install the SST.
2. Loosen each bolt one turn at a time in a crisscross pattern
until spring tension is released. Then remove the ciutch cov-
er and disc.
Pilot bearing
1. Remove the pilot bearing with the
SST if necessary.
Flywheel
Note
l After removing the flywheel, inspect for oil leakage
past the crankshaft rear oil seal.
If necessary, replace the oil seal.
1. Hold the flywheel with the SST.
2. Remove the flywheel.
Instalfation Note
Flywheel
1 -Wipe the bolts clean and apply sealant to the bolt threads.
2. Install the flywheel and SST.
3. Tighten the bolts evenly and gradually in the pattern shown.
Tightening torque:
96403 Nmm (9.8-10.5 m-kg, 71-76 ft.lb)
PiIot bearing
Note
l Install the pilot bearing ftush with the flywheeL
I_ Install the new bearing with the SST.
03UOHX-030
H-20
