4C EXHAUST SYSTEM (UNLEADED FUEL)
REMOVAL AND INSTALLATION
1. Remove in the sequence shown in the figure.
2. Install in the reverse order of removal.
Torque Specifications
86U04A-159
4. Catalytic converter
5. Bracket
6. Front pipe
INSPECTION
1. Check the catalytic converter and exhaust pipe for
deterioration or restriction.
2. Check the insulation covers welded onto the cata-
lytic converter for damage.
Note
If the insulation cover is touching the catalytic
converter housing, excessive heat at the floor
will occur.
19—26 N-m (1.9—2.6 m-kg, 14—19 tt-lb)
29—39 N-m (3.0—4.0 m-kg, 22—29 ft-lb)
34—49 N-m (3.5—5.0 m-kg, 26—36 ft-lb)
39—57 N-m (4.0-5.8 m-kg, 29—42 ft-lb)
37—52 N m (3.8—5.3 m-kg, 27—38 ft-lb) 8—11 N-m 8—1.1 m-kg, 69—95 In-lb)
N-m .3 m-kg, 38 ft-lb)
1. Main silencer
2. Middle pipe
3. Pre-silencer
86U04A-160
4C—88
