1986 TOYOTA SUPRA coolant capacity

TURBOCHARGER SYSTEM (2JZ±GTE)
PREPARATION
SST (SPECIAL SERVICE TOOLS)
09992±00241 Turbocharger Pressure Gauge
EQUIPMENT
 
 
Dial indicator 
 
Impeller wheel
 
 
Torque wrench 
 
COOLANT
 Item Capacity Classification
 
 Engine coolant (w/ Heater) M/T
A/T 
  9.5 liters (10.0 US qts. 8.4 lmp. qts)
9.4 liters (9.9 US qts, 8.3 lmp. qts) 
 Ethylene±glycol base
EG±140± ENGINETURBOCHARGER SYSTEM (2JZ±GTE)

09990±01000Engine Control Computer Check
Harness ªAº
RECOMMENDED TOOLS
09082±00050 TOYOTA Electrical Tester Set
09200±00010Engine Adjust Kit
09258±00030 Hose Plug SetPlug for vacuum hose, fuel
hose etc.
EQUIPMENT
 
 Carburetor cleaner
 
 
 
 Graduated cylinder 
 Injector
 
 
Soft brush 
 
 
 
Sound scope 
 
Injector
 Tachometer 
 
 Torque wrench
 
 
 
 Vacuum gauge 
 
COOLANT
 Item Capacity Classification 
 Engine coolant (w/ Heater) M/T
A/T 
 9.5 liters (10.0 US qts, 8.4 lmp. qts)
9.4 liters (9.9 US qts, 8.3 lmp. qts) 
 Ethylene±glycol base
± ENGINESFI SYSTEM (2JZ±GTE)EG±259

09843±18020 Diagnostic Check Wire
09990±01000Engine Control Computer Check
Harness ªAº
RECOMMENDED TOOLS
09082±00050 TOYOTA Electrical Tester Set
09200±00010Engine Adjust Kit
09258±00030 Hose Plug SetPlug for vacuum hose, fuel
hose etc.
EQUIPMENT
 Carburetor cleaner 
 
 Graduated cylinder 
 Injector
 Soft brush 
 Sound scope Injector
 Tachometer 
 Torque wrench 
 
 Vacuum gauge
 
 
COOLANT 
 Item
 
 Capacity
 
 Classification
 
 
Engine coolant (w/ Heater) M/T
A/T 
 
7.3 liters (7.7 US qts, 6.4 lmp. qts)
8.3 liters (8.8 US qts, 7.3 lmp. qts) 
 
Ethylene±glycol base
EG±188± ENGINESFI SYSTEMS (2JZ±GE)

COOLING SYSTEM
PREPARATION
SST (SPECIAL SERVICE TOOLS)
09230±01010 Radiator Service Tool Set
09231±14010 Punch2JZ±GE only (Aluminum type)
RECOMMENDED TOOLS
09040±00010 Hexagon Wrench Set
09082±00050 TOYOTA Electrical Tester Set
09258±00030 Hose Plug Set
EQUIPMENT
 
 
Radiator cap tester 
 
 
 
Heater 
 
Thermostat
ECT switch (2JZ±GTE)
 

Thermometer 

Thermostat
ECT switch (2JZ±GTE)
 
 Torque wrench
 
 
COOLANT
ItemCapacityClassification 
 
 
 
 
 
Engine coolant (w/ Heater)
2JZ±GE M/T
A/T
2JZ±GTE M/T
A/T
 






7.3 liters (7.7 US qts, 6.4 lmp. qts)
8.3 liters (8.8 US qts, 7.3 lmp. qts)
9.5 liters (10.0 US qts, 8.4 lmp. qts)
9.4 liters (9.9 US qts, 8.3 lmp. qts)





 
Ethylene±glycol base
± ENGINECOOLING SYSTEMEG±329

COOLANT REPLACEMENT
1. DRAIN ENGINE COOLANT
(a) Remove the radiator cap.
CAUTION: To avoid the danger of being burned, do not remove
the radiator cap while the engine and radiator are still hot, as
fluid and steam can be blown out under pressure.
(b) Loosen the 2 drain plugs (for the engine and radiator), and
drain the coolant.
(c) Close the drain plugs.
Torque:
Engine drain plug
29 NVm (300 kgfVcm, 22 ftVlbf)
2. FILL ENGINE COOLANT
(a) Slowly fill the system with coolant.
wUse a good brand of ethylene±glycol base coolant and
mix it according to the manufacturer's directions.
wUsing coolant which includes more than 50 %
ethylene±glycol (but not more than 70 %) is
recommended.
NOTICE:
wDo not use an alcohol type coolant.
wThe coolant should be mixed with demineralized water or
distilled water.
Capacity (w/ Heater):
2JZ±GE
M/T
7.3 liters (7.7 US qts, 6.4 lmp. qts)
A/T
8.3 liters (8.8 US qts, 7.3 lmp. qts)
2JZ±GTE
M/T
9.5 liters (10.0 US qts, 8.4 lmp. qts)
A/T
9.4 liters (9.9 US qts, 8.3 lmp. qts)
(b) Install the radiator cap.
(c) Start the engine, and bleed the cooling system.
(d) Refill the reservoir with coolant until it reaches the ºFULLº
line.
3. CHECK ENGINE COOLANT FOR LEAKS
± ENGINECOOLING SYSTEMEG±331