1986 TOYOTA SUPRA heater

3. INSPECT HEATER RESISTANCE OF MAIN HEATED
OXYGEN SENSOR
(a) Disconnect the oxygen sensor connector.
(b) Using an ohmmeter, measure the resistance between the
terminals +B and HT.
Resistance:
At 20°C (68°F) 11±16

If the resistance is not as specified, replace the sensor.
Torque: 20 NVm (200 kgfVcm, 14 ftVlbf)
(c) Reconnect the oxygen sensor connector. EG±320
± ENGINESFI SYSTEM (2JZ±GTE)

OXYGEN SENSOR INSPECTION
1. INSPECT OPERATION OF SUB HEATED OXYGEN
SENSOR
(See circuit inspection in Engine Troubleshooting)
2. INSPECT HEATER RESISTANCE OF SUB HEATED
OXYGEN SENSOR
(a) Remove the driver's seat.
(b) Take out the console box side of the floor carpet.
(c) Disconnect the oxygen sensor connector.
(d) Using an ohmmeter, measure the resistance between the
terminals +B and HT.
Resistance:
At 20°C (68°F) 11±16

If the resistance is not as specified, replace the sensor.
Torque: 20 NVm (200 kgfVcm, 14 ftVlbf)
(e) Reconnect the oxygen sensor connector.
(f) Reinstall the floor carpet.
(g) Reinstall the driver's seat. EG±322
± ENGINESFI SYSTEM (2JZ±GTE)

 VSV for EVAP Resistance at 20°C (68°F) 30±34

 VSV for EGR Resistance at 20°C (68°F) 30±34

 
 
 
 
 
ECT sensor 
 
 
 
 
Resistance at ±20°C (±4°F)
at 0°C (32°F)
at 20°C (68°F)
at 40°C (104°F)
at 60°C (140°F)
at 80°C (176°F) 
 
 
 
 
10±20 k

4±7 k

2±3 k

0.9±1.3 k

0.4±0.7 k

0.2±0.4 k

 
 
 
EGR gas
temperature
sensor 
 
 
Resistance at 50°C (122°F)
at 100°C (212°F)
at 150°C (302°F) 
 
 
64±97 k

11±16 k

2±4 k

 Main heated
oxygen sensor Heater coil resistance at 20°C (68°F) 11±16

 
 Sub heated
oxygen sensor 
 Heater coil resistance at 20°C (68°F) 
 11±16

 Fuel cut rpm Fuel return rpm 1,100 rpm
TORQUE SPECIFICATIONS
 Part tightened NVm kgfVcm ftVlbf
Fuel line for union bolt2930022 for flare nut 30 310 22 Fuel pressure regulator x Delivery pipe 8.8 90 78 in.Vlbf Delivery pipe x Intake manifold 21 210 15 Injector holder x Delivery pipe 7.8 80 69 in.Vlbf Fuel inlet pipe x Delivery pipe 41 420 30 Fuel return pipe x Fuel pressure regulator 27 280 20 Air intake chamber x Intake manifold 27 280 20 Manifold stay x Air intake chamber 39 400 29
 Manifold stay x Cylinder head 39 400 29
 EGR pipe x Cylinder head 27 270 20
 EGR pipe x EGR valve 64 650 47
 Control cable bracket x Air intake chamber 19 195 14
 Air intake chamber stay x Intake manifold 19 195 14
 Air intake chamber stay x Control cable bracket 19 195 14
 
 
Fuel pressure pulsation damper x Fuel pipe support
for SST 
 
41
35 
 
420
350 
 
30
25
 Fuel tank band x Body 39 400 29
 MAF meter x Air cleaner case 6.9 70 61 in.Vlbf
Throttle body x Air intake chamber2121015 
IAC valve x Air intake chamber
 
21
 
210
 
15 
EGR gas temperature sensor x EGR valve
 
20
 
200
 
14 Knock sensor x Cylinder block 44 450 33 Main heated oxygen sensor x Exhaust manifold 20 200 14 Sub heated oxygen sensor x Center exhaust pipe 20 200 14 
 Upper front crossmember extension x Front suspension Bolt
Nut 
 29
33 
 300
340 
 22
25
 
 
Front lower arm bracket stay x Front suspension Bolt
Nut 
 
44
59 
 
450
600 
 
33
43
EG±328± ENGINESFI SYSTEM (2JZ±GTE)

09843±18020 Diagnostic Check Wire
09990±01000Engine Control Computer Check
Harness ªAº
RECOMMENDED TOOLS
09082±00050 TOYOTA Electrical Tester Set
09200±00010Engine Adjust Kit
09258±00030 Hose Plug SetPlug for vacuum hose, fuel
hose etc.
EQUIPMENT
 Carburetor cleaner 
 
 Graduated cylinder 
 Injector
 Soft brush 
 Sound scope Injector
 Tachometer 
 Torque wrench 
 
 Vacuum gauge
 
 
COOLANT 
 Item
 
 Capacity
 
 Classification
 
 
Engine coolant (w/ Heater) M/T
A/T 
 
7.3 liters (7.7 US qts, 6.4 lmp. qts)
8.3 liters (8.8 US qts, 7.3 lmp. qts) 
 
Ethylene±glycol base
EG±188± ENGINESFI SYSTEMS (2JZ±GE)

3. California only:
INSPECT HEATER RESISTANCE OF MAIN HEATED OXY-
GEN SENSORS
(a) Disconnect the oxygen sensor connectors.
(b) Using an ohmmeter, measure the resistance between the
terminals +B and HT.
Resistance:
At 20°C (68°F) 11±16

If the resistance is not as specified, replace the sensor.
Torque: 44 NVm (450 kgfVcm, 33 ftVlbf)
(c) Reconnect the oxygen sensor connectors.
± ENGINESFI SYSTEM (2JZ±GE)EG±249

OXYGEN SENSOR INSPECTION
1. INSPECT OPERATION OF SUB HEATED OXYGEN
SENSOR
(See circuit inspection in Engine Troubleshooting)
2. INSPECT HEATER RESISTANCE OF SUB HEATED
OXYGEN SENSOR
(a) Remove the driver's seat.
(b) Take out the console box side of the floor carpet.
(c) Disconnect the oxygen sensor connector.
(d) Using an ohmmeter, measure the resistance between the
terminals +B and HT.
Resistance:
At 20°C (68°F) 11±16

If the resistance is not as specified, replace the sensor.
Torque: 20 NVm (200 kgfVcm, 14 ftVlbf)
(e) Reconnect the oxygen sensor connector.
(f) Reinstall the floor carpet.
(g) Reinstall the driver's seat.
± ENGINESFI SYSTEM (2JZ±GE)EG±251

SERVICE SPECIFICATIONS
SERVICE DATA
 
 
Fuel pressure
regulator 
 
Fuel pressure at no vacuum 
 
265±304 kPa (2.7±3.1 kgf/cm2, 38±44 psi)
 Fuel pump Resistance at 20°C (68°F) 0.2±3.0

 
 
 
Injector 
 
 
Resistance
Injection volume
Difference between each cylinder
Fuel leakage 
 
 
13.4±14.2

70±88 cm3 (4.3±5.4 cu in.) per 15 sec.
9 cm
3 (0.5 cu in.) or less
One drop or less per minute
 
 
 
 
 
VAF meter
 
 
 
 
 
Resistance (THA±E2) at±20°C (±4°F)
at 0°C (32°F)
at 20°C (68°F)
at 40°C (104°F)
at 60°C (140°F)
 
 
 
 
 
10±20 k

4±7 k

2±3 k

0.9±1.3 k

0.4±0.7 k

 
 
 
 
Throttle body 
 
 
 
Throttle body fully closed angle
Dashpot setting speed M/T
A/T
Throttle opener setting speed 
 
 
 
65
2,600 + 400 rpm
1,800 + 400 rpm
1,500 + 400 rpm
 
 
 
 
 
Throttle
position
sensor 
 
 
 
 
Clearance between stop screw and lever
0 mm (0 in.) VTA±E2
0.40 mm (0.016 in.) IDL±E2
0.60 mm (0.024 in.) IDL±E2
Throttle valve fully open VTA±E2
± VC±E2 
 
 
 
 
0.34±6.3 k

0.5 k
or less
Infinity
2.4±11.2 k

3.1±7.2 k

 IAC valve Resistance B1 (or B2)±Others 18±22
 VSV for ACIS Resistance at 20°C (68°F) 38.5±44.5
 
 
 
 
 
VSV for Fuel
pressure
control
(California
only)
 
 
 
 
 
Resistance at 20°C (68°F)
 
 
 
 
 
33±39

 VSV for EVAP Resistance at 20°C (68°F) 27±33

 VSV for EGR Resistance at 20°C (68°F) 38.5±44.5
 
 
 
 
 
 
ECT sensor 
 
 
 
 
 
Resistance at ±20°C (±4°F)
at 0°C (32°F)
at 20°C (68°F)
at 40°C (104°F)
at 60°C (140°F)
at 80°C (176°F) 
 
 
 
 
 
10±20 k

4±7 k

2±3 k

0.9±1.3 k

0.4±0.7 k

0.2±0.4 k

 
 
EGR gas
temperature
sensor 
 
Resistance at 50°C (122°F)
at 100°C (212°F)
at 150°C (302°F) 
 
64±97 k

11±16 k

2±4 k

 
 
 
Main heated
oxygen sensor
(California)
 
 
 
Heater coil resistance at 20°C (68°F)
 
 
 
11±16

EG±256± ENGINESFI SYSTEM (2JZ±GE)

 
 
 
Sub heated
oxygen sensor
(California
only) 
 
 
Heater coil resistance at 20°C (68°F) 
 
 
11±16

 
 Fuel cut rpm
 
 Fuel return rpm
 
 1,400 rpm
TORQUE SPECIFICATIONS
 Part tightened NVm kgfVcm ftVlbf
 
 
Fuel line for union bolt
for flare nut 
 
29
30 
 
300
310 
 
22
22
 Fuel pressure regulator x Delivery pipe 8.8 90 78 in.Vlbf
 Delivery pipe x Intake manifold 21 210 15
 Actuator for ACIS x Air intake chamber 6.8 70 61 in.Vlbf
 Fuel inlet pipe x Delivery pipe 41 420 30 Fuel return pipe x Fuel pressure regulator 27 280 20 Air intake chamber stay x Cylinder head 18 185 13 
Air intake chamber stay x Air intake chamber
 
18
 
185
 
13 
Intake air connector x Air intake chamber
 
27
 
270
 
20 
 Throttle body bracket x Throttle body
 
 21
 
 210
 
 15
 Throttle body bracket x Cylinder head 21 210 15
 No.2 vacuum pipe x Intake manifold 27 270 20
 EGR pipe x Cylinder head 27 270 20
 EGR pipe x EGR valve 64 650 47
 
 
Fuel pressure pulsation damper x Fuel pipe support
for SST 
 
41
35 
 
420
350 
 
30
25
 Starter x Transmission 39 400 29
 Fuel tank band x Body 39 400 29 VAF meter x Air cleaner case 10 100 7 Throttle body x Intake air connector 21 210 15 
Vacuum tank x Intake manifold
 
21
 
210
 
15 
Brake booster union x Air intake chamber
 
29
 
300
 
22 
 Air intake chamber x Intake manifold
 
 27
 
 270
 
 20
 EGR gas temperature sensor x EGR valve 20 200 14
 Knock sensor x Cylinder block 44 450 33
 Oxygen sensor (Except California) x Exhaust manifold 20 200 14
 Main heated oxygen sensor (California) x Exhaust manifold 44 450 33
 Sub heated oxygen sensor (California only) x Center exhaust pipe 20 200 14
± ENGINESFI SYSTEM (2JZ±GE)EG±257