COOLING SYSTEM -Thermostat-
Description (Bottom by-pass coolant flow)
- water OUtkt Coalant flow out
through water Outlet Thermostat
Open A few
r) close Much
SLC565
Disassembly and Assembly
CAUTION:
Drain coolant from drain cocks on cylinder block side and radiator.
Remove radiator shroud, cooling fan and water suction pipe securing bolt, then remove thermostat.
Always replace with new gasket.
After installation. run engine for
a few
and check for leaks. minutes,
SLC555 16.21 N m (1 6.2 1 kg-m, 12.15 ft-lbl
LC-11
