MINOR REPAIRS
Replacing a Fuse, The Battery
REPLACING A FUSE
Before fitting a new fuse, it is necessary to discover the cause of the \
incident, and have it rectified.
The 8 fuses protecting the circuit (5 fuses of 16 amps and 3 of 10
amps) are found inside two boxes situated under the bonnet on the
scuttle.
Pull off the fuse box cover, and replace the fuse with one of the
same amperage.
UPPER FUSE BOX (Item A)
Fig. 45
Fuse boxes
Green marking (10 A) Yellow marking (16 A)
LH side and tail lamps
(and rear number plate lamps) Brake lamps
Interior lamp
Hazard warning device
Red marking (10 A) Blue marking (16 A)
RH side and tail lamps
(and rear number plate lamps) Fuel gauge
Direction indicators Windscreen wipers
Alternator field feed
Charging rate indicator
Engine oil pressure warning lamp (on "2 CV 6")
LOWER FUSE BOX (Item B) Green marking (16 A) Blue marking (16 A)
RH dipped beam LH main beam
Red marking (16 A) Yellow marking (16 A)
LH dipped beam RH main beam
REPLACING THE BATTERY (Fig. 46)
Battery reference: 12 V - 125/25 Ah. CEI (or 150/30 Ah. CEI)
Disconnect the battery terminals, always beginning with the
negative one.
Unscrew the two tie-rods of the support frame then disengage the
battery by sliding it towards the front of the vehicle.
Check that the terminals are in the correct position before fitting the \
new battery.
Fig. 46
Battery
1 - Terminals 2 - Tie-rods