Key
All doors, fuel-filler lid/charging port
lid, and the liftgate can be locked/
unlocked by pressing the key switch.
The key must be carried by the driver.
Key Code Number Plate
An auxiliary key can be ordered based
on the key code number printed on
the key code number plate at an
Authorized Mazda Dealer.
Store the key code number plate in a
safe place (not in the vehicle).
Do not divulge the key number to
others.
Warnings and Cautionsfor Using the Key
WARNING
Do not leave the key in your vehicle
with children and keep them in a
place where your children will not
find or play with them.
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. Children may find these keys to
be an interesting toy to play with and
could cause the power windows or
other controls to operate, or even
make the vehicle move.
CAUTION
Radio equipment like this is
governed by laws in the United
States.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
Because the key (transmitter) uses
low-intensity radio waves, it may not
function correctly under the
following conditions:
The key (transmitter) is carried with
communication devices such as
cellular phones.
The key (transmitter) contacts or is
covered by a metal object.
The key (transmitter) is near
electronic devices such as personal
computers.
Non-Mazda genuine electronic
equipment is installed in the
vehicle.
Opening/closing
Key
4-4
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
How to Use the
Advanced Keyless Entry System
The system operates only when the
driver is in the vehicle or within
operational range while the key is
being carried (Except during power
saving function operation).
NOTE
The advanced keyless entry system
functions can be deactivated to
prevent any possible adverse effect
on a user wearing a pacemaker or
other medical device. If the system is
deactivated, you will be unable to
start the hybrid system by carrying
the key. Consult an Authorized
Mazda Dealer for details. If the
advanced keyless entry system has
been deactivated, you can start the
hybrid system by following the
procedure indicated when the key
battery goes dead.
Refer to Starting the hybrid system
with a dead key battery on page
8-9.
When the battery power is low, or in
places where there are high-intensity
radio waves or noise, the operational
range may become narrower or the
system may not operate.
Locking/Unlocking Using Touch
Sensor
1. Exterior antenna
2. 80 cm (31 in)
3. Operational range
NOTE
The system may not operate if you
are too close to the windows or door
handles, or liftgate.
If the key is left in the following areas
and you leave the vehicle, the doors
may be locked depending on the
radio wave conditions even if the key
is left in the vehicle.
Around the dashboardIn the storage compartments such
as the glove compartment or the
center console
Next to a communication device
such as a mobile phone
Locking Using Door-Lock Switch/
Unlocking Using Electric Liftgate
Opener
1. Exterior antenna
2. 80 cm (31 in)
3. Operational range
Opening/closing
Advanced Keyless Entry System
4-10
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
How to Use the
Immobilizer System
NOTE
The hybrid system may not start and
security indicator light may illuminate
or flash if the key is placed in an area
where it is difficult for the system to
detect the signal, such as on the
dashboard or in the glove
compartment. Move the key to a
location within the signal range,
switch the vehicle power off, and
then restart the hybrid system.
Signals from a TV or radio station, or
from a transceiver or mobile
telephone could interfere with your
immobilizer system. If you are using
the proper key and the hybrid system
fails to start, check the security
indicator light.
Arming
The system is armed when the vehicle
power is switched from ON to off.
The security indicator light
in the
instrument cluster flashes every 2
seconds until the system is disarmed.
Disarming
The system is disarmed when the
vehicle power is switched ON with the
correct programmed key. The security
indicator light
illuminates for
about 3 seconds and then turns off.
If the hybrid system does not start with
the correct key, and the security
indicator light remains illuminated or
flashing , try the following:
Make sure the key is within the
operat ional range for signal
transmission. Switch the vehicle power
off, and then restart the hybrid system.
If the hybrid system does not start after
3 or more tries, contact an Authorized
Mazda Dealer.
Opening/closing
Security System
4-39
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Warnings and Cautionsfor When the Refueling
WARNING
Always heed the following when
refueling.
Turn off the hybrid system.
Keep sparks and
flames away from
the fuel-filler port.
Wipe off any spilled fuel as soon as
possible.
Otherwise, it could cause a fire or
explosion because fuel or fuel vapor
could ignite easily.
Before refueling, make sure to
discharge the static electricity in your
body by touching a metal object on
the vehicle body.
An electrical discharge could ignite the
fuel or cause serious burns.
Always heed the following while
refueling.
Always refuel the vehicle by yourself
and do not allow other people to
come close to the fuel-filler port.
Do not go back inside the cabin or
touch a person or object charged
with static electricity.
Do not use any electronic devices
such as a mobile phone or
Smartphone.
It could ignite the fuel or cause serious
burns caused by the charged static
electricity in your body again.
When opening/closing the fuel-filler
cap, always turn the fuel-filler cap by
holding the knob of the fuel-filler cap.
An electrical discharge could ignite the
fuel or cause serious burns.
Slowly open the fuel-filler cap, wait
for any hissing to stop, then open the
cap.
If the fuel-filler cap is opened quickly,
fuel may spray out and cause a fire.
Spraying fuel can also be harmful if it
gets in the eyes or on the skin.
Do not breath fuel vapors.
To x i c s u b s t a n c e s m i ght be included in
the fuel.
Insert the refueling nozzle into the
fuel-filler port securely.
If the nozzle is not inserted sufficiently,
it may delay the auto stop when the
tank is full, resulting in the fuel spilling
over and a possible fire.
Do not continue fueling after it is
stopped automatically.
If you continue fueling, fuel may spill
over causing a fire.
Do not pull out the refueling nozzle
immediately after the fuel is stopped
automatically.
The fuel remaining in the refueling
nozzle may spill out and cause a fire.
Securely close the fuel-filler cap.
If the fuel-filler cap is not closed
securely, fuel may leak while driving
the vehicle which could cause a fire.
CAUTION
Follow the fueling instructions
indicated at the gas station when
refueling.
Driving
Refueling
5-104
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Climate control timer
The climate control timer is a function
which operates the cooling or heating
system automatically according to a
preset time. The power consumption
of the air conditioner after starting to
drive the vehicle is reduced by
operating the air conditioner and
providing a comfortable temperature
in the cabin before driving.
Refer to Convenient Ways to Use the
Fully Automatic Air-Conditioning on
page 6-12.
Charge Connector Lock
The charge connector lock is a function
which locks the charge connector con-
nected to the vehicle so that it cannot
be pulled out. You can also select the
lock conditions for the charge connec-
tor according to locations and situa-
tions.
1. Select Settings from the homescreen on Mazda Connect.
2. Select EV Settings from the setting screen.
3. Select Charge Connector Lock from the selection screen.
4. Set the lock condition from the se- lection screen.
Available setting changes
Locked When Charging
Unlocks connector when charging is complete
or vehicle is unlocked.
Locked When Connected
Unlocks connector only when vehicle is un-
locked.
Available setting changes
Off
Charge connector remains unlocked at all
times.
Functions using a Smartphone
You can check the remaining high
voltage battery power, operate the
charging, and operate the air
conditioner remotely by a Smartphone
remote control operation using the
Connected Service. For details, consult
an Authorized Mazda Dealer.
Driving
Charging
5-121
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Convenient Ways to Usethe Fully AutomaticClimate Control
Cabin Preconditioning
Cabin preconditioning is a collective
term regarding use of the climate
control timer and the remote climate
control.
While the climate control timer or the
remote climate control is operating ,
you can check the setting status on
your Smartphone.
Climate Control Timer
By setting the departure time using
Mazda Connect, the climate control
system operates and adjusts the cabin
temperature by the departure time.
The departure time, day, set
temperature, and defroster operation/
non-operation can be personalized,
and 7 types of patterns can be
programmed in advance.
Remote Climate Control
Using your Smartphone, you can turn
on the climate control system remotely
before departing.
WARNING
Do not operate the cabin
preconditioning with people or pets
in the vehicle.
The cabin preconditioning may stop
automatically due to the vehicle
conditions and the surrounding
environment. If the climate control
system stops and the temperature
inside the vehicle increases or
decreases, it could cause a serious
medical condition such as heat
exhaustion and dehydration.
CAUTION
If any of the following conditions is
met, the cabin preconditioning will
not operate. In addition, if the cabin
preconditioning is operating, it will
stop. However, if the liftgate is
opened while the cabin
preconditioning is operating, the
cabin preconditioning will not stop.
When the cabin preconditioning
does not operate or stops, the cabin
preconditioning cancel display is
indicated on the display.
The high voltage battery or the
lead-acid battery charge is low
The doors/liftgate are open
The vehicle power is switched to a
position other than OFF
There is a problem with the vehicle
If any of the following conditions is
met, the climate control system will
not operate effectively and the cabin
temperature may not reach the set
temperature.
Your power consumption is high
Extremely high or low
temperatures
The climate control system operates
so that it reaches the set temperature
at the departure time, and stops at
the departure time. The cabin
temperature may not reach the set
temperature if you get in the vehicle
earlier or later than the set departure
time.
If you operate the cabin
preconditioning while charging the
vehicle, it could take more time to
charge the battery. In addition, when
it is extremely hot or cold, the power
consumption of the climate control
system is high, therefore the charge
amount may be less than the preset
charge amount.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-12
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Edit
The Climate Control Timer settings can
be edited.
FunctionAvailable setting
changes
Departure Time Time
(10-minute inter- vals)
Repeat
*1Monday ― Sun-
day
Te m p e ra t u r e 15.5
℃ (61 ℉) ―
28.5℃ (83 ℉)
Front Defroster Enable,
Disable
Rear Defroster Enable,
Disable
*1 If no [Repeat] day is set, the climate control timer operates only
1 time at the set hours.
NOTE
Enabling “Front Defroster” /“Rear
Defroster” will aid you in defrosting
and removing ice or snow from the
window glass. The recommended set
temperature when setting the
defroster is 22 °C (72 °F) or higher.
The defroster performance changes
according to the set temperature.
The climate control timer does not
work if the vehicle is left unattended
for a long period of time in an
environment where GPS signal
reception is difficult, such as in an
underground parking lot or indoors,
or if GPS signals are not received.
When GPS signals are received, the
climate control timer becomes
operational.
The climate control timer does not
operate while the remote climate
control is operating.
The climate control timer can be
stopped by a Smartphone remote
control operation using the
Connected Service.
For details, consult an Authorized
Mazda Dealer.
How to Set the Remote Climate
Control
To use the remote climate control, it is
necessary to subscribe to Connected
Service.
For details, consult an Authorized
Mazda Dealer.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-14
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
How to Use the Mazda Connect
Information
Drive Efficiency Monitor:
Monitor vehicle efficiency history and system status in real time.
High Voltage Battery Monitor
:
View high voltage battery charge level, charging schedule, and more.
SiriusXM Travel Link
*:
Access traffic information, weather, pa rking information and sports scores.
Vehicle Status Monitor
:
View important vehicle maintenance messages, information, and intervals.
Entertainment
FM
AM
SiriusXM
*
Pa n d o ra*
Bluetooth
USB1 Audio/USB2 Audio
USB1 Video/USB2 Video
Phone Connectivity/Apple CarPlay/Android Auto
Audio Off
Notifications
Displays text messages received by the mobile device paired to Mazda Connect and
notifications from the vehicle.
Communication
By connecting your mobile device, such as a Smartphone, to Mazda Connect via
Bluetooth®, you can use the hands-free call and short message functions.
Other Equipment
Mazda Connect
7-6*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04