2023 TOYOTA PRIUS PRIME clock

5067-3. Do-it-yourself maintenance
sure that the engine is warmed up. If
the engine oil level exceeds the refill
upper limit mark, contact your
Toyota dealer.
■Checking the oil type and
preparing the items needed
Make sure to check the oil type
and prepare the items needed
before adding oil.
 Engine oil selection
P.602
 Oil quantity (Low level mark
 Refill upper limit mark)
1.6 qt. (1.5 L, 1.3 Imp. qt.)
 Item
Clean funnel
■Adding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as that
already in the engine.
1 Remove the oil filler cap by
turning it counterclockwise.
2 Add engine oil slowly, check-
ing the dipstick.
Make sure that the oil level does
not exceed the refill upper limit mark and is between the low level
mark and refill upp
er limit mark.
Low level mark
Refill upper limit mark
The shape of the dipstick may differ
depending on the type of vehicle or
engine.
3Install the oil filler cap by
turning it clockwise.
■After changing the engine
oil
The engine oil maintenance
data should be reset. Perform
the following procedures:
1 Press or of the meter
control switches and select
on the multi-information
display.
2 Press or of the meter
control switches and select
“ Vehicle Settings”. Then
press and hold .
3 Press or of the meter
control switches and select
“Oil Maintenance”. Then
press .
4 Select “Yes” and press .
Adding engine oil
A
B

5788-2. Steps to take in an emergency
ble.
4Connect the hose to the bot-
tle.
Make sure to insert the hose until
its claw is securely engaged to the
bottle.
5Remove the valve cap from
the valve of the punctured
tire.
6 Extend the hose. Remove
the air release cap from the
hose.
You will use the air release cap
again.
Therefore keep it in a safe place.
7Connect the hose to the
valve.
Screw the end of the hose clock-
wise as far as possible.

6219-2. Customization
9
Vehicle specifications
*1: For details about each function: P.166
*2: This setting changes in ac cordance with My Settings.
*3: The setting can be changed on “General” of .
*4: The default setting varies according to country.
*5: This can only be set if GPS calibration of clock is turned off in the Multi-
media Display settings.
*6: The setting can be changed on “Notifications” of .
■Door lock ( P.185, 587)
*: This setting changes in accordance with My Settings.
Default settingsO
Convenience Services (Sug-
gestion function)
*2On
On (when the
vehicle is stopped)
O*6O
Off
FunctionDefault settingCustomized setting
Unlocking using a
mechanical key
Driver’s door
unlocked in one step, all doors
unlocked in two step
All doors
unlocked in one step
O
Automatic door locking
function
*
Shift position linked door
locking opera- tionOff
OOSpeed linked door locking operation
Automatic door unlocking
function
*
Shift position linked door
unlocking oper- ationOff
OODriver’s door linked door
unlocking oper- ation
Function*1Default settingCustomized settingABC
ABC