Page 97 of 572

972-1. Instrument cluster
2
Vehicle status information and indicators
■Liquid crystal display
Small spots or light spots may 
appear on the display. This phenom-
enon is characteristi c of liquid crys-
tal displays, and there is no problem 
continuing to use the display.
The multi-information display is 
operated using the meter control 
switches.
Scroll screens
*, change the 
displayed content
* and move 
the cursor
Press: Enter/Set Press and hold: Reset/Dis-
play customizable items
Return to the previous screen
Call sending/receiving and 
history display
Linked with the hands-free system, 
sending or receiving call is dis-
played. For details regarding the 
hands-free system, refer to the 
“MULTIMEDIA OWNER’S MAN-
UAL”.
*: On screens where the screen can 
be scrolled and the display can 
be switched, a scroll bar or a 
round icon that shows the num-
ber of registered screens is dis-
played.
■Fuel economy
Use the displayed values as a ref-
erence only.
Current fuel consumption
Displays the instantaneous current 
fuel consumption.
Average fuel economy (after 
start)
Displays the average fuel con-
sumption since hybrid system 
WARNING
■Caution for use while driving
●When operating the multi-infor-
mation display while driving, 
pay extra attention to the safety 
of the area aroun d the vehicle.
●Do not look continuously at the 
multi-information display while 
driving as you may fail to see 
pedestrians, objects on the 
road, etc. ahead o f the vehicle.
■The information display at 
low temperatures
 P. 8 8
Changing the meter dis-
play
Driving information dis-
play ( ) 
         
        
        
     
        
        Page 102 of 572

1022-1. Instrument cluster
■Tire pressure
• It may take a few minutes to dis- play the tire inflation pressure 
after the power switch is turned to 
ON. It may also take a few min-
utes to display the tire inflation 
pressure after inflation pressure 
has been adjusted.
• “---” may be disp layed if the tire 
position information cannot be 
determined due to unfavorable 
radio wave conditions.
• Tire inflation pressure changes  with temperature. The displayed 
values may also be  different from 
the values measured using a tire 
pressure gauge.
■Changing settings
Use the meter control switches 
on the steering wheel to change 
settings.
1 Press   or   of the meter 
control switch to select  .
2 Press   or   of the meter 
control switch to select the 
desired item to be custom-
ized.
3 Press or press and hold  .
The available settings will differ 
depending on if   is pressed or 
pressed and held. Follow the 
instructions on the display.
■Setting items
  LTA (Lane Tracing Assist) 
( P.253)
Press and hold   to change the 
settings of the following items: • “Lane Center”
Select to enable
/disable the lane 
centering function.
• “Sensitivity”
Select to set the warning sensitivity.
• “Sway Warning”
Select to enable/disable the vehicle 
sway warning.
• “Sway Sensitivity”
Select to set the vehicle sway warn-
ing sensitivity.
  PCS (Pre-Collision Sys-
tem) ( P.242)
Press   to enable/disable the 
pre-collision system.
• PCS (Pre-Collision System) 
on/off
Select to enable/disable the 
pre-collision system.
Press and hold   to change the 
settings of the following item:
• “Sensitivity”
Select to change  the pre-collision 
warning timing.
  DRCC (Dynamic Radar 
Cruise Control with full-speed 
range) ( P.263)
Press and hold   to change the 
settings of the following items:
• “Curve Speed Reduction” 
( P.270)
Select to set the curve speed 
reduction function strength.
Settings display ( ) 
         
        
        
     
        
        Page 104 of 572

1042-1. Instrument cluster
“TPWS” (Tire Pressure Warn-
ing System) ( P.407)
• “Set Pressure” (tire pressure 
warning system  initialization)
Select to initialize  the tire pressure 
warning system.
• “Change Wheel” (register tire  pressure warning system sensor 
ID codes)
Select to register  the ID codes of 
the tire pressure s ensors to the tire 
pressure warning system.
 “Rear Seat Reminder” 
( P.129)
Select to enable/disable the rear 
seat reminder.
“Scheduled Maintenance” 
( P.387)
Select to reset the scheduled main-
tenance information (maintenance 
required message and distance 
until maintenance necessary) after 
all maintenance is performed.
■ Meter settings
Press and hold   to change 
the settings of the following 
items:
 Language
Select to change the language dis-
played.
Units
Select to change the units of mea-
sure displayed.
  EV indicator ( P.211)
Select to enable/disable the EV 
indicator.
Speedometer display (digital 
speed)
Select to enable/disable the speed-
ometer display.
Gadget content
Select to turn the display of a gad-
get.
Fuel economy type
Select to change the average fuel 
consumption display and an item to 
be displayed as gadget.
Pop-up display
Select to enable/disable pop-up 
displays for each relevant system.
Multi-information display off
Displays a blank screen.
Default setting
Select to reset the meter display 
settings to the default setting.
■Vehicle functions and set-
tings that can be changed
 P.510 
         
        
        
     
        
        Page 105 of 572

1052-1. Instrument cluster
2
Vehicle status information and indicators
■Background color of the indica-
tor/shift position display area
The background color of the indica-
tor/shift position display area is 
changed according to the driving 
mode as follows ( P.308):
●Eco drive mode: Blue
●Sport mode: Red
■Suspension of the settings dis-
play
●Some settings cannot be changed 
while driving. When changing set-
tings, park the vehicle in a safe 
place.
●If a warning message is displayed, 
operation of the settings display 
will be suspended.
■Pop-up displays
Depending on the pop-up display, 
the currently disp layed item in the 
message display area may be tem-
porarily not displayed. The item will 
be displayed after the pop-up dis-
play is no longer displayed.
Select to display warning mes-
sages and measures to be 
taken if a malfunction is 
detected. ( P.456)
Displays suggestions to the 
driver in the following situations. 
To select a response to a dis-
played suggestion, use the 
meter control switches.
■Suggestion to turn off the 
headlights
If the headlights are left on for a 
certain amount of time after the 
power switch has been turned 
off, if the headlight switch is in 
the “AUTO” position, a sugges-
tion message will be displayed 
asking if you wish to turn the 
headlights off.
To turn the headlights off, select 
“Yes”.
If the driver's door is opened after 
the power switch is turned off, this 
suggestion message will not be dis-
played.
WARNING
■Cautions during setting up 
the display
As the hybrid system needs to be 
operating during setting up the 
display, ensure that the vehicle is 
parked in a place with adequate 
ventilation. In a closed area such 
as a garage, exhaust gases 
including harmful carbon monox-
ide (CO) may collect and enter 
the vehicle. This may lead to 
death or a seri ous health hazard.
NOTICE
■During setting up the display
To prevent 12-volt battery dis-
charge, ensure that the hybrid 
system is operating while setting 
up the display features.
Warning message display 
()
Suggestion function 
         
        
        
     
        
        Page 106 of 572
1062-1. Instrument cluster
■Customization
Some functions can be customized. 
(  P.510)
Content display area
By selecting menu icons on the 
multi-information di splay, a variety 
of driving-related information can 
be displayed. The  multi-information 
display can also be used to change 
display settings and  other vehicle 
settings.
Warning or advice pop-up displays 
are also displayed in certain situa-
tions.
Driving support system status 
display area
Displays a contracted display of the 
driving support system status when 
not selected for the multi-informa-
tion display, while any of the follow-
ing systems are operating:
■Liquid crystal display
 P. 9 4
Multi-infor mation dis-
play (12.3-inch dis-
play)
Display 
         
        
        
     
        
        Page 107 of 572

1072-1. Instrument cluster
2
Vehicle status information and indicators
■Meter control switch
The multi-information display is 
operated using the meter control 
switches.
/ : Select multi-informa-
tion display
/ : Change displayed 
content, scroll up/down the 
screen and move the cursor 
up/down
Press: Enter/Set
Press and hold: Reset/Dis-
play customizable items Return to the previous screen
Call sending/receiving and 
history display
Linked with the hands-free system, 
sending or receiving call is dis-
played. For details regarding the 
hands-free system, refer to the 
“MULTIMEDIA OWNER’S MAN-
UAL”.
■Changing meter pages
Press the   or   meter con-
trol switch to change the meter 
page.
■Display contents
 Driving support system infor-
mation display
 Settings
 Warning message ( P.456)
■Changing contents in a 
page
Select the desired content on 
WARNING
■Caution for use while driving
●When operating the multi-infor-
mation display while driving, 
pay extra attention to the safety 
of the area aroun d the vehicle.
●Do not look continuously at the 
multi-information display while 
driving as you may fail to see 
pedestrians, objects on the 
road, etc. ahead o f the vehicle.
■The information display at 
low temperatures
 P. 9 5
Changing the meter dis-
play
Content of multi-informa-
tion display (Center) 
         
        
        
     
        
        Page 112 of 572

1122-1. Instrument cluster
distance driven of trip A/B
 Trip time: Displays the 
elapsed time of trip A/B
■AWD Control (if equipped)
The illustration used is intended as 
an example, and may differ from the 
image that is actually displayed on 
the multi-information display.
Torque distribution display
Displays the drive status of each 
wheel in 6 steps from 0 to 5.
■The ECO Accelerator Guid-
ance/Eco score will not operate 
when
The ECO Accelerator Guidance/Eco 
score will not opera te in the follow-
ing situations:
●The Hybrid System Indicator is not 
operating.
●The vehicle is being driven using 
the dynamic radar cruise control 
with full-speed range.
Displays suggestions to the 
driver in the following situations. 
To select a response to a dis-
played suggestion, use the 
meter control switches.
■Suggestion to turn off the 
headlights
If the headlights are left on for a 
certain amount of time after the 
power switch has been turned 
off, if the headlight switch is in 
the “AUTO” position, a sugges-
tion message will be displayed 
asking if you wish to turn the 
headlights off.
To turn the headlights off, select 
“Yes”.
If the driver's door is opened after 
the power switch is turned off, this 
suggestion message will not be dis-
played.
■Customization
Some functions can be customized. 
(  P.510)
■Vehicle functions and set-
tings that can be changed
 P.510
■Meter display settings
 P.108
■Suspension of the settings dis-
play
●Some settings cannot be changed 
while driving. When changing set-
tings, park the vehicle in a safe 
place.
●If a warning message is displayed, 
operation of the settings display 
will be suspended.
Suggestion function
Settings display 
         
        
        
     
        
        Page 113 of 572
1132-1. Instrument cluster
2
Vehicle status information and indicators
WARNING
■Cautions during setting up 
the display
If the hybrid system is operating 
while changing certain settings on 
the settings display, ensure that 
the vehicle is parked in a place 
with adequate ventilation. In a 
closed area such as a garage, 
exhaust gases including harmful 
carbon monoxide (CO) may col-
lect and enter the vehicle. This 
may lead to death  or a serious 
health hazard.
NOTICE
■During setting up the display
To prevent 12-volt battery dis-
charge, ensure that the hybrid 
system is operating while setting 
up the display features.