Page 460 of 664
4606-3. Do-it-yourself maintenance
CAMRY_U
2.5 L 4-cylinder (A25A-FKS) engine
Engine compartment
Fuse boxes (if equipped)( P. 499)
Engine oil filler cap ( P. 464)
Engine oil level dipstick ( P. 462)
Brake fluid reservoir ( P. 468) Battery
( P. 469)
Radiator ( P. 467)
Electric cooling fan
Condenser ( P. 467)
Engine coolant reservoir ( P. 466)
Washer fluid tank ( P. 472)1
2
3
4
5
6
7
8
9
10 
     
        
        Page 461 of 664
4616-3. Do-it-yourself maintenance
CAMRY_U
6
Maintenance and care
3.5 L V6 (2GR-FKS) engine
Fuse boxes (if equipped)( P. 499)
Engine oil filler cap ( P. 464)
Engine oil level dipstick ( P. 462)
Brake fluid reservoir ( P. 468)
Battery ( P. 469) Radiator (
P. 467)
Electric cooling fan
Condenser ( P. 467)
Engine coolant reservoir ( P. 466)
Washer fluid tank ( P. 472)1
2
3
4
5
6
7
8
9
10 
     
        
        Page 462 of 664
4626-3. Do-it-yourself maintenance
CAMRY_U
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
■Checking the engine oil
Park  the  vehicle  on  level  ground.  After  warming  up  the  engine
and  turning  it  off,  wait  more  than  5  minutes  for  the  oil  to  dra in
back into the bottom of the engine.
Holding a rag under the end, pull the dipstick out.
Wipe the dipstick clean.
Reinsert the dipstick fully.
Engine oil
1
2
2.5  L  4-cylinder  (A25A-FKS)
engine3.5 L V6 (2GR-FKS) engine
3
4 
     
        
        Page 463 of 664
4636-3. Do-it-yourself maintenance
CAMRY_U
6
Maintenance and care
Holding  a  rag  under  the  end,  pull  the  dipstick  out  and  check  the
oil level.
Low
Normal
Excessive
The shape of the dipstick may differ depending on the type of v ehicle
or engine.
Wipe the dipstick and reinsert it fully.
5
Flat dipstickTwist dipstick
1
2
3
6 
     
        
        Page 464 of 664

4646-3. Do-it-yourself maintenance
CAMRY_U■
Adding engine oil
If  the  oil  level  is  below  or  near
the  low  level  mark,  add  engine
oil  of  the  same  type  as  that
already in the engine.
Make  sure  to  check  the  oil  type  and  prepare  the  items  needed
before adding oil.
Remove the oil fille r cap by turning it counterclockwise.
Add engine oil slowly,  checking the dipstick.
Install the oil filler cap  by turning it clockwise.
■Engine oil consumption
A certain amount of engine oil will be consumed while driving.  In the following
situations,  oil  consumption  may  increase,  and  engine  oil  may  ne ed  to  be
refilled in between oil maintenance intervals.
● When the engine is new, for example directly after purchasing t he vehicle or
after replacing the engine
● If low quality oil or oil of an inappropriate viscosity is used
● When  driving  at  high  engine  speeds  or  with  a  heavy  load,  or  when  driving
while accelerating or decelerating frequently
● When  leaving  the  engine  idling  for  a  long  time,  or  when  driving   frequently
through heavy traffic
Engine oil selection P. 578
Oil quantity 
(Low  Full)
2.5 L 4-cylinder (A25A-FKS) engine
1.6 qt. (1.5 L, 1.3 Imp. qt.)
3.5 L V6 (2GR-FKS) engine
1.9 qt. (1.8 L, 1.6 lmp. qt.)
Items Clean funnel
1
2
3 
     
        
        Page 465 of 664

4656-3. Do-it-yourself maintenance
CAMRY_U
6
Maintenance and care
WARNING
■Used engine oil
● Used  engine  oil  contains  potentially  harmful  contaminants  which   may
cause  skin  disorders  such  as  inflammation  and  skin  cancer,  so  c are
should be taken to avoid prolonged and repeated contact. To remove used
engine oil from your skin, wash thoroughly with soap and water.
● Dispose  of  used  oil  and  filters  only  in  a  safe  and  acceptable  manner.  Do
not dispose of used oil and filters in household trash, in sewers or onto the
ground. 
Call  your Toyota  dealer,  service  station  or  auto  parts  store  for  information
concerning recycling or disposal.
● Do not leave used engine oil within the reach of children.
NOTICE
■To prevent serious engine damage
Check the oil level on a regular basis.
■ When replacing the engine oil
● Be careful not to spill engine oil on the vehicle components.
● Avoid overfilling, or the engine could be damaged.
● Check the oil level on the dipstick every time you refill the v ehicle.
● Be sure the engine oil filler cap is properly tightened.
■ If oil is spilled on the engine cover (2.5 L 4-cylinder [A25A-F KS] engine)
To  prevent  the  engine  cover  from  being  damaged,  remove  any  engine  oil
from the engine cover as soon as possible using a neutral detergent.
Do not use an organic solvent such as brake cleaner. 
     
        
        Page 578 of 664
![TOYOTA CAMRY 2023  Owners Manual 5788-1. Specifications
CAMRY_U■
Oil capacity (Drain and refill [Reference*])
*: The engine oil  capacity is a reference  quantity to be  used whe
n changing
the engine oil. Warm up and turn off the  TOYOTA CAMRY 2023  Owners Manual 5788-1. Specifications
CAMRY_U■
Oil capacity (Drain and refill [Reference*])
*: The engine oil  capacity is a reference  quantity to be  used whe
n changing
the engine oil. Warm up and turn off the](/manual-img/14/59244/w960_59244-577.png)
5788-1. Specifications
CAMRY_U■
Oil capacity (Drain and refill [Reference*])
*: The engine oil  capacity is a reference  quantity to be  used whe
n changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
2.5 L 4-cylinder (A25A-FKS) engine
“Toyota  Genuine  Motor  Oil”  is  used  in  your  Toyota  vehicle.  Use
Toyota  approved  “Toyota  Genuine  Motor  Oil”  or  equivalent  to  sat -
isfy the following grade and viscosity.
Oil grade: ILSAC GF-6B multigrade engine oil
Recommended viscosity: SAE 0W-16
SAE  0W-16  is  the  best  choice  for
good fuel economy and good start-
ing in cold weather.
If SAE 0W-16 is not available, SAE
0W-20  oil  may  be  used.  However,
it  must  be  replaced  with  SAE  0W-
16 at the next oil change.
Oil viscosity (0W-16 is explained here as an example):
• The 0W in 0W-16 indicates the characteristic of the oil which  allows cold
startability. Oils with a lower value before the W allow for ea sier starting of
the engine in cold weather.
• The 16 in 0W-16 indicates the viscosity characteristic of the  oil when the
oil is at high temperature. An oil with a higher viscosity (one  with a higher
value)  may  be  better  suited  if  the  vehicle  is  operated  at  high  speeds,  or
under extreme load conditions.
Lubrication system
With filterWithout filter
2.5  L  4-cylinder
(A25A-FKS) engine4.8 qt. 
(4.5 L, 4.0 Imp. qt.)4.4 qt. 
(4.2 L, 3.7 Imp. qt.)
3.5  L  V6  (2GR-FKS)
engine5.7 qt. 
(5.4 L, 4.8 Imp. qt.)5.6 qt. 
(5.3 L, 4.7 Imp. qt.)
Outside temperature