Page 8 of 80
7
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Audio remote control switches ............................................................................ P.42
Paddle shift switches
*
Meter control switches ........................................................................................... P.14
Vehicle-to-vehicle distance switch
*
Cruise control switch*
LTA (Lane Tracing Assist) switch*
Talk switch .................................................................................................................. P.40
Telephone switches ................................................................................................. P.40
*: Refer to the “OWNER’S MANUAL”.
A
B
C
D
E
F
G
H
Page 30 of 80
29
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Press the “MENU” button on the Remote Touch to display the menu screen.
*1: Refer to the “NAVIGATION AND MU LTIMEDIA SYSTEM OWNER’S MANUAL”.
*2: This function is not available on some models.
Center Display
Menu screen
Vehicles with a 10.3-inch display Vehicles with a 8-inch display
SwitchFunction
Select to display the “Destination” screen. ( P.34)
Select to display the audio control screen. (P.43, 44, 45, 46)
Select to display the hands-free control screen. ( P.37)
Select to display the “Apps” screen.*1, 2
//
When an Apple CarPlay/Android Auto connection is established
and this button displays “Apple CarPlay”/“Android Auto”, select to
display the Apple CarPlay/Android Auto screen.
*1, 2
Select to display th e information screen. (P.32)
Select to display the setup screen.*1
Select to display the air co nditioning control screen. ( P.48)
Select to adjust the contrast and brightness of the screens, turn the
screen off, etc.
*1, 2
Page 42 of 80
41
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Follow the procedure below to display the audio control screen.
Using the audio control switch
Press the “RADIO” or “MEDIA” button.
Using the Remote Touch
Press the “MENU” button on the Re mote Touch, then select “Audio”.
Please refer to P.27 for the Remote Touch operation.
Using the audio control switch
1Press the “RADIO” or “MEDIA” but-
ton.
“RADIO” button: Press to change
radio modes.
“MEDIA” button: Press to change
media modes.
●Each time the “RADIO” or
“MEDIA” button is pressed, the
audio source changes.
From the audio source selection screen
1Display the audio control screen.
2Select “Source” on the sub menu.
3Select the desired source.
Audio System
Audio control screen
Selecting an audio source
Page 50 of 80
49
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Option control screen
Select on the air conditioning control screen to display the option control screen.
The functions can be switched on and off.Adjusting the temperature for driver
and passenger seats separately
(“DUAL” mode)
Select to set eco mode on/off
Set cooling and dehumidification func-
tion on/off
Removing pollen from the air (Micro
dust and pollen filter)
■Sub function menu
When the sub function button on the Remote Touch is pressed, the following functions
can be switched on and off.
Set automatic mode on/off
Turn the fan off
Set cooling and dehumidification func-
tion on/off
Adjust the temperature for driver and
passenger seats separately (“DUAL”
mode)
Select to set eco mode on/off
A
B
C
D
A
B
C
D
E
Page 61 of 80
60
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
The HomeLink® wireless control system in your vehicle has 3 buttons which can be pro-
grammed to operate 3 different devices. Refe r to the programming methods on the follow-
ing pages to determine the method wh ich is appropriate for the device.
HomeLink
® indicator light
Garage door operation indicators
HomeLink
® icon
Illuminates while HomeLink
® is oper-
ating.
Buttons
■Before programming HomeLink®
● During programming, it is possible that gara ge doors, gates, or other devices may oper-
ate. For this reason, make su re that people and objects ar e clear of the garage door or
other devices to prevent injury or other potential harm.
● It is recommended that a new battery be placed in the remote control transmitter for
more accurate programming.
● Garage door opener motors manufactured after 1995 may be equipped with rolling
code protection. If this is the case, you may need a stepladder or other sturdy, safe device
to reach the “Learn” or “Smart” button on the garage door opener motor.
■HomeLink® programming procedure
The programming procedures can also be found at the following URL.
Website: www.homelink.com/lexus
For support, contact customer support at the following.
Help Line: 1-800-355-3515
Garage Door Opener
The garage door opener can be programmed to operate garage doors, gates, entry
doors, door locks, home lighting system s, security systems, and other devices.
System components
A
B
C
D
Page 62 of 80
61
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Programming HomeLink®
Steps 1 through 3 must be performed within 60 seconds, otherwise the indicator light
will stop flashing and programming will not be able to be completed.
1Press and release the HomeLink® button you want to program and check that the
HomeLink
® indicator light flashes (orange).
2Point the remote control transmitter
for the device at the rear view mirror,
1 to 3 in. (25 to 75 mm) from the
HomeLink
® buttons.
Keep the HomeLink
® indicator light in
view while programming.
3Program a device.
Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the handheld transmitter button until the HomeLink
® indicator light
changes from slowly flashing orange to rapi dly flashing green (rolling code) or continu-
ously lit green (fixed code), then release the button.
Programming an entry gate (for U.S.A. owners)/Programming a device in the Cana-
dian market
Press and release the remote control transmit ter button at 2 second intervals, repeat-
edly, until the HomeLink
® indicator light changes from slow ly flashing (orange) to rapidly
flashing (green) (rolling code) or co ntinuously lit (green) (fixed code).
4Test the HomeLink® operation by pressing the newly programmed button and observ-
ing the indicator light:
● Indicator light illuminates: Programming of a fixed code device has completed. The
garage door or other device should operate when a HomeLink
® button is pressed
and released.
● Indicator light flashes rapidly: The garage door opener motor or other device is
equipped with a rolling code. To complete programming, firmly press and hold the
HomeLink
® button for 2 second s then release it.
Page 67 of 80
66
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
After you sign the Telematics Subscription Service Agreement, download the Lexus Enform
Remote app from your smartphone’s app store, and register within the app (or enroll and
complete registration at the dealer), you can begin using these services.
A variety of subscription terms are available. Contact your Lexus dealer, or call 1-800-25-
LEXUS (1-800-255-3987) for further subscription details.
Lexus Enform Remote (if equipped)
Lexus Enform Remote is a smartphone applicat ion that lets you view and remotely control
certain aspects of your vehicle.
For details about the functions and services of this application, refer to
http://www.lexus.com/enform/
.
Function of the Lexus Enform Remote is achieved by using DCM (Data Communication
Module).
Subscription
