Page 7 of 96
6
IS500_IS350_IS300_QG_U
Driving position memory switches*1, 2
Outside rear view mirror switches*2
Door lock switches ....................................................................................................P.77
Power window switches.......................................................................................... P.78
Window lock switch ................................................................................................. P.78
Tire pressure warning reset switch
*2
*1:If equipped
*2:Refer to the “Owner’s Manual”.
A
B
C
D
E
F
Page 11 of 96
10
IS500_IS350_IS300_QG_U
■Ceiling
Inside rear view mirror*1
Sun visors*1
Vanity mirrors*1
Interior light*1
Personal lights*1
Moon roof switches*2............................................................................................ P.79
Door-linked interior light switch
*1
“SOS” button*1, 2
Garage door opener switches*2........................................................................ P.82
*1: Refer to the “Owner’s Manual”.
*2:If equipped
A
B
C
D
E
F
G
H
Page 62 of 96
61
IS500_IS350_IS300_QG_U
Left-hand side temperature control switch
Automatic mode switch
OFF switch
Fan speed decreases switch
Fan speed increases switch
Air flow mode switch
Right-hand side temperature control switch
DUAL switch
A/C switch
Outside air mode switch
Recirculated air mode switch
Rear window defogger and outside rear view mirror defoggers switch
Windshield defogger switch
Automatic Air Conditioning System
Air outlets and fan speed are automatically adjusted according to the temperature set-
ting.
Press the “MENU” button on the Remote Touch, then select to display the air condi-
tioning control screen. For information regarding Remote Touch, P.42.
Vehicles with a 10.3-inch display: The air co nditioning system can be displayed and oper-
ated on the side display.
Air conditioning controls
A
B
C
D
E
F
G
H
I
J
K
L
M
Page 84 of 96

83
IS500_IS350_IS300_QG_U
■Programming HomeLink®
Steps 1 through 3 must be performed within 60 seconds, otherwise the indicator light will
stop flashing and programming w ill not be able to be completed.
1Press and release the HomeLink® button you want to program and check that the
HomeLink
® indicator light flashes (orange).
2Point the remote control transmitter
for the device at the rear view mirror,
1 to 3 in. (25 to 75 mm) from the
HomeLink
® buttons.
Keep the HomeLink
® indicator light in
view while programming.
3Program a device.
Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the handheld transmitter button until the HomeLink
® indicator light changes
from slowly flashing orange to rapidly flashing green (rolling code) or continuously lit green
(fixed code), then release the button.
Programming an entry gate (for U.S.A. owners)/Programming a device in the Cana-
dian market
Press and release the remote control transmitte r button at 2 second intervals, repeatedly,
until the HomeLink
® indicator light changes from slowly flashing (orange) to rapidly flashing
(green) (rolling code) or continuously lit (green) (fixed code).
4Test the HomeLink® operation by pressing the newly programmed button and observ-
ing the indicator light:
● Indicator light illuminates: Programming of a fixed code device has completed. The
garage door or other device should operate when a HomeLink
® button is pressed
and released.
● Indicator light flashes rapidly: The garage door opener motor or other device is
equipped with a rolling code. To complete programming, firmly press and hold the
HomeLink
® button for 2 second s then release it.
Page 89 of 96
88
What to do if...
IS500_IS350_IS300_QG_U
See the “OWNER’S MANUAL”
Turn signal indicatorRCTA OFF indicator
Headlight indicator (U.S.A.)PKSB OFF indicator
(if equipped)
Tail light indicator (Canada)
(flashes)
Slip indicator
Headlight high beam indicatorVSC OFF indicator
Automatic High Beam
indicatorSmart access system with
push-button start indicator
PCS warning light(U.S.A.)Parking brake
indicator
Cruise control indicator(Canada)
Dynamic radar cruise control
indicatorBrake hold standby indicator
Cruise control “SET” indicatorBrake hold operated indicator
*2
LTA indicatorEco Driving Indicator Light
BSM outside rear view mirror
indicatorsSnow mode indicator
BSM OFF indicatorLow outside temperature
indicator
Intuitive parking assist OFF
indicator (if equipped)
For further information, refer to the “OWNER’S MANUAL”.