2023 KIA SORENTO PHEV buttons

58†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
SEATING
S E AT I N G
One-Touch Slide & Fold 2nd-Row Seats†1 2
To get in and out of the 3rd Row Seat, adjust the 2nd Row Seat by pressing the One-Touch Slide & Fold 2nd Row Seats (located on top A and side B of the 2nd-row seatback):
1 Set the front seatback to the most upright position, and slide the seat forward, if needed
2 Lower the 2nd Row Seat Headrest to the lowest position
3 Insert the seatbelt buckle into the pocket between the rear seatback and the cushion
4 Press the One-Touch Slide & Fold buttons to slide the Seat forward
Refer to section 4 in the Owner ’s Manual for more information
REMINDER: Do not use the One-Touch Slide & Fold but tons while the 2nd-row passenger seat is occupied
3rd-Row Folding Seat*†1 2
Folding 3rd-Row Seat
1 Fully lower the headrest C
2 Pull the Seat folding strap D located on the Seatback
3 Fold the Seat down
Refer to section 4 in the Owner ’s Manual for more information
AB
C
D
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
One-Touch Slide & Fold 2nd-Row Seats Video
QR CODE
The strap can be used in the back of the 2nd Row Seat to slide and fold the 2nd Row Seats
QUICK TIPS

63 *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
See section 5 in the Owner ’s Manual for more information
Map/Room Lamps
Automatic turn off function*
The interior lights automatically turn off approximately 30 seconds after the Engine Start/Stop button is OFF
Map/Room Lamp Operation
•Press lens A to turn the Driver ’s/Passenger ’s Map Lamps ON/OFF This light produces a spot beam for convenient use as a map lamp or as a personal lamp for the driver or the front passenger
•Press button B to turn all the Map/Room Lamps ON/OFF
•
Press button C to turn the Map/Room Lamp ON, for 30 seconds, when a door is opened, unlocked from Smart Key or the ignition is turned OFF When pressed and a door is opened, or doors are unlocked from the Smart Key, the Map and Room Lamps turn ON for approximately 30 seconds
•Press button D to turn the Room Lamp ON/OFF
Panoramic Sunroof with Power Sunshade*
The Sunroof and Sunshade operation is controlled through a multidirectional switch E The ignition needs to be ON to operate the sunroof / power sunshade
To slide the power sunshade and sunroof:
•Auto Open – Push the switch E backward to the second detent position and release
•Auto Close – Push the switch E forward to the second detent position and release
To slide the power sunshade only:
•Auto Open – Push the switch E backward to the first detent position and release
•Auto Close – Push the switch E forward to the first detent position and release
Slide the sunroof (with sunshade open):
•Auto Open – Push the switch E backward to the first detent position and release
•Auto Close – Push the switch E forward to the first detent position and release to close sunroof glass only Push the switch E forward to the second detent position and release to close sunroof glass and power sunshade
To tilt the sunroof:
•Raise: Push and release switch E upward
•Lower: Push and release switch E upward
•Auto-close sunroof and power sunshade: Push the switch E forward to the second detent position
PASSENGER
AIR BAGOFFPASSENGERAIR BAGOFF
PASSENGERAIR BAGOFF
PASSENGERAIR BAGOFFPASSENGERAIR BAGOFF
PASSENGERAIR BAGOFF(Front overhead console. Buttons may vary)
(Center of cabin)
REMINDERS:
•
The Sunshade needs to remain OPEN while sunroof is open
•
Do not adjust the sunroof or sunshade while driving This could result in loss of control of the vehicle
•When closing, be mindful of any objects or persons
•
If the ignition/vehicle is turned off, and the driver ’s door is opened, with the sunroof not fully closed, the Instrument Cluster LCD will display a warning message and a chime will sound for a few seconds
See section 5 in the Owner ’s Manual for more information
AA
C
D
E
B
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Sunroof Operation Video
QR CODE
•When doors are unlocked by the Smar t Key*, the lamp turns ON for approximately 30 seconds
•If your vehicle is equipped with the theft alarm system, the interior lights automatically turn off approximately 5 seconds after the system is in the armed stage
•Using interior lights for an extended period of time may cause bat ter y discharge
QUICK TIPS
To stop the Sunroof/Sunshade at any position, push or pull the Sunroof control switch in any direction
QUICK TIP
OTHER KEY FEATURES
OTHER KEY F E AT U R E S
REMINDER: The sunroof can be operated for approximately 30 seconds after the ignition is turned off If the front doors are opened, the sunroof cannot be operated even within the 30-second period

64†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
How to Sync Transmitter with HomeLink®*
If programming for the first time, begin with Step 1 (repeating this step will delete all information)
To program non-rolling and rolling code garage door openers and other devices:
1 Press and hold the left A and C buttons simultaneously until the indicator light G begins to flash (to reprogram buttons, skip this step)
2 Press and hold the desired button A B or C and hold the button on the transmitter while it is approximately 1 to 3 inches away from the mirror The HomeLink® Indicator light E will flash rapidly once the frequency signal has been successfully programmed
To finish programming rolling code garage door openers, complete these steps:
3 Locate the “learn” or “smart ” button on the garage door ’s motor head unit Press and release the button and complete Step 4 within 30 seconds
4 Firmly press and release the programmed HomeLink® button up to three times
Operating HomeLink®:
Press one of the programmed HomeLink® buttons
Erasing programmed buttons:
Press and hold the A and C buttons simultaneously for approximately 20 seconds, and then release both buttons within 30 seconds
The HomeLink® / Auto-Dimming Rearview Mirror* is designed to reduce glare from a vehicle’s headlights located in the rear and also connect up to three electronic transmitters into one location
HomeLink®†2 with Auto-Dimming Rearview Mirror*
A HomeLink® Channel 1
B HomeLink® Channel 2
C HomeLink® Channel 3
D Garage Door Opener Status Indicator: Closing or Closed
E HomeLink® Operation Indicator
F Garage Door Opener Status Indicator: Opening or Open
G HomeLink® User Interface Indicator
If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s HomeLink® system, you may need to purchase a HomeLink Repeater Kit For more information, go to w w w HomeLink com or call (800) 355-3515
ABC
D
E
F
G
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Homelink® Support Video
QR CODE
•You can reprogram a single HomeLink® but ton by repeating Step 2
•Erasing the programmed but tons will delete all trained transmit ters
QUICK TIPS
OTHER KEY FEATURES
OTHER KEY F E AT U R E S