Page 553 of 649
8-38
Emergency situations
Once the data which is stored in the Pan-European eCall system is delivered to the
rescue centre to assist the driver and passengers with proper rescue operations, the
data will be deleted after rescue operation is completed.
Description of the ecall in-vehicle system
OAC3079020TU
Overview of the 112-based eCall in-vehicle system, its operation and functionalities:
refer to this section. The 112-based eCall service is a public service of general interest
and is accessible free of charge.
The 112-based eCall in-vehicle system is activated by default. It is activated
automatically by means of in- vehicle sensors in the event of a severe accident.
Page 559 of 649
8-44
Emergency situations
WARNING
Emergency power supply of the Pan-
European eCall system from the battery
[ 7 K H 3 D Q ( X U R S H D Q H & D O O V \ V W H P
battery supplies power during 1 hour
in case the main power source of the
vehicle is cut off due to the collision
during the emergency situations.
[ 7 K H 3 D Q ( X U R S H D Q H & D O O V \ V W H P
battery should be replaced every 3
years. For more information, refer to
“Maintenance Schedule” in chapter
9.
LED illumination in red (system
malfunction)
If the red LED illuminates in normal
driving conditions, this can indicate
malfunction of the Pan-European
eCall system. We recommend that you
have the Pan-European eCall system
checked by a HYUNDAI authorised
repairer as soon as possible. Otherwise
correct operation of the Pan-European
eCall system device, installed in your
vehicle is not guaranteed. Owner
of the vehicle incurs liability for
consequences, occurred as a result
of nonobservance of conditions,
mentioned above. Arbitrary Removal or Modification
The Pan-European eCall system calls
emergency services for assistance.
Thus, any arbitrary removal or changes
to the Pan-European eCall system
settings may affect your driving safety.
Also, it may even make an erroneous
emergency call to the Public Safety
Answering Point (PSAP). Thereby, we
kindly ask you not to make any changes
by yourself or by the third parties in the
settings of the equipment of the Pan-
European eCall system, installed in your
vehicle.
Page 622 of 649
9-63
09
OBC3090039
OBC3TN091006
„CUV
7 X U Q V L J Q D O O L J K W
1. Open the bonnet.
2. Remove the turn signal light or low
beam assist-static light bulb cover by
turning it counterclockwise.
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly.
Push the socket into the assembly and
turn the socket clockwise.
6. Install the turn signal light or low
beam assist-static light bulb cover by
turning it clockwise.
3 R V L W L R Q O L J K W ' D \ W L P H U X Q Q L Q J O L J K W
L I H T X L S S H G
If the LED lamp does not operate,
we recommend that the system be
inspected by a HYUNDAI authorised
repairer.
The LED lamps cannot be replaced as
a single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit. Unless a skilled technician
checks or repairs the LED lamp, it may
damage related parts of the vehicle.
Page 642 of 649
9-83
09
WARNING
After washing the vehicle, test the
brakes whilst driving slowly to see if
they have been affected by water. If
braking performance is impaired, dry
the brakes by applying them lightly
whilst maintaining a slow forward
speed.
Aluminium wheel maintenance
The aluminium wheels are coated with a
clear protective finish.
NOTICE
[ ' R Q R W X V H D Q \ D E U D V L Y H F O H D Q H U
polishing compound, solvent, or wire
brushes on aluminium wheels.
[ & O H D Q W K H Z K H H O Z K H Q L W K D V F R R O H G
[ 8 V H R Q O \ D P L O G V R D S R U Q H X W U D O
detergent, and rinse thoroughly with
water. Also, be sure to clean the
wheels after driving on salted roads.
[ ' R Q R W Z D V K W K H Z K H H O V Z L W K K L J K
speed car wash brushes.
[ ' R Q R W X V H D Q \ F O H D Q V H U F R Q W D L Q L Q J
acid or alkaline detergents.
Corrosion protection
3 U R W H F W L Q J \ R X U Y H K L F O H I U R P F R U U R
V L R Q
By using the most advanced design
and construction practices to combat
corrosion, we produces vehicles of the
highest quality. However, this is only
part of the job. To achieve the long-term
corrosion resistance your vehicle can
deliver, the owner’s cooperation and
assistance is also required.
& R P P R Q F D X V H V R I F R U U R V L R Q
The most common causes of corrosion
on your vehicle are:
[ Road salt, dirt and moisture that is
allowed to accumulate underneath the
vehicle.
[ Removal of paint or protective
coatings; by stones, gravel, abrasion
or minor scrapes and dents which
leave unprotected metal exposed to
corrosion.
+ L J K F R U U R V L R Q D U H D V
If you live in an area where your vehicle
is regularly exposed to corrosive
materials, corrosion protection is
particularly important. Some of the
common causes of accelerated
corrosion are road salts, dust control
chemicals, ocean air and industrial
pollution.
