2023 HYUNDAI I20 charging
[x] Cancel search: chargingPage 279 of 649
6-6
Driving your vehicle
Key ignition switch positions
Switch
PositionAction Notice
LOCKThe ignition key can be removed in
the LOCK position.The steering wheel locks to protect
the vehicle from theft.
(if equipped)
ACCElectrical accessories are usable.The steering wheel unlocks.
If difficulty is experienced turning
the ignition switch to the ACC
position, turn the key whilst
turning the steering wheel right
and left to release tension.
ONThis is the normal key position
when the engine has started.
All features and accessories are
usable.
The warning lights can be checked
when you turn the ignition switch
from ACC to ON.Do not leave the ignition switch in
the ON position when the engine is
not running to prevent the battery
from discharging.
STARTTo start the engine, turn the
ignition switch to the START
position. The switch returns to the
ON position when you let go of the
key.The engine will crank until you
release the key.
Page 282 of 649
6-9
06
Engine Stop/Start button positions
- Vehicle with manual transmission/intelligent manual transmission
Button PositionAction Notice
OFF[ 7 R W X U Q R I I W K H H Q J L Q H V W R S
the vehicle and then press the
Engine Start/Stop button.
[ 7 K H V W H H U L Q J Z K H H O O R F N V W R
protect the vehicle from theft.
(if equipped)If the steering wheel is not locked
properly when you open the
driver’s door, the warning chime
will sound.
ACC[ 3 U H V V W K H ( Q J L Q H 6 W D U W 6 W R S
button when the button is
in the OFF position without
depressing the clutch pedal.
[ ( O H F W U L F D O D F F H V V R U L H V D U H
usable.
[ 7 K H V W H H U L Q J Z K H H O X Q O R F N V [ , I \ R X O H D Y H W K H ( Q J L Q H 6 W D U W
Stop button in the ACC position
for more than one hour, the
battery power will turn off
automatically to prevent the
battery from discharging.
[ , I W K H V W H H U L Q J Z K H H O G R H V QT W
unlock properly, the Engine
Start/Stop button will not
work. Press the Engine Start/
Stop button whilst turning the
steering wheel right and left to
release tension.
ON[ 3 U H V V W K H ( Q J L Q H 6 W D U W 6 W R S
button whilst it is in the ACC
position without depressing the
clutch pedal.
[ 7 K H Z D U Q L Q J O L J K W V F D Q E H
checked before the engine is
started.Do not leave the Engine Start/
Stop button in the ON position
when the engine is not running
to prevent the battery from
discharging.
STARTTo start the engine, depress the
clutch and brake pedals and
press the Engine Start/Stop
button with the shift lever in
neutral.If you press the Engine Start/Stop
button without depressing the
clutch pedal, the engine does not
start and the Engine Start/Stop
button changes as follows:
OFF o ACC o ON o OFF
Page 283 of 649
6-10
Driving your vehicle
Engine Stop/Start button positions
- Vehicle with automatic transmission / dual clutch transmission
Button PositionAction Notice
OFF[ 7 R W X U Q R I I W K H H Q J L Q H S U H V V W K H
Engine Start/Stop button with
shift lever in P (Park). When you
press the Engine Start/Stop
button without the shift lever in
P (Park), the Engine Start/Stop
button does not turn to the OFF
position, but turns to the ACC
position.
[ 7 K H V W H H U L Q J Z K H H O O R F N V W R
protect the vehicle from theft.
(if equipped)If the steering wheel is not locked
properly when you open the
driver’s door, the warning chime
will sound.
ACC[ 3 U H V V W K H ( Q J L Q H 6 W D U W 6 W R S
button when the button is
in the OFF position without
depressing the brake pedal.
[ 6 R P H H O H F W U L F D O D F F H V V R U L H V D U H
usable.
[ 7 K H V W H H U L Q J Z K H H O X Q O R F N V [ , I \ R X O H D Y H W K H ( Q J L Q H 6 W D U W
Stop button in the ACC position
for more than one hour, the
battery power will turn off
automatically to prevent the
battery from discharging.
[ , I W K H V W H H U L Q J Z K H H O G R H V QT W
unlock properly, the Engine
Start/Stop button will not work.
[ 3 U H V V W K H ( Q J L Q H 6 W D U W 6 W R S
button whilst turning the
steering wheel right and left to
release tension.
ON[ 3 U H V V W K H ( Q J L Q H 6 W D U W 6 W R S
button whilst it is in the ACC
position without depressing the
brake pedal.
[ 7 K H Z D U Q L Q J O L J K W V F D Q E H
checked before the engine is
started.Do not leave the Engine Start/
Stop button in the ON position
when the engine is not running
to prevent the battery from
discharging.
STARTTo start the engine, depress the
brake pedal and press the Engine
Start/Stop button with the shift
lever in the P (Park) or in the N
(Neutral) position.
For your safety, start the engine
with the shift lever in the P (Park)
position.If you press the Engine Start/Stop
button without depressing the
brake pedal, the engine does not
start and the Engine Start/Stop
button changes as follows:
OFF o ACC o ON o OFF or ACC
Page 336 of 649
6-63
06
& K D L Q , Q V W D O O D W L R Q
When installing tyre chains, follow the
manufacturer’s instructions and mount
them as tightly possible. Drive slowly
(less than 20 mph (30 km/h)) with
chains installed. If you hear the chains
contacting the body or chassis, stop and
tighten them. If they still make contact,
slow down until the noise stops. Remove
the tyre chains as soon as you begin
driving on cleared roads.
When mounting snow chains, park
the vehicle on level ground away from
traffic. Turn on the vehicle Hazard
Warning Flasher and place a triangular
emergency warning device behind the
vehicle (if available). Always place the
vehicle in P (Park), apply the parking
brake and turn off the engine before
installing snow chains.
NOTICE
When using tyre chains:
[ Wrong size chains or improperly
installed chains can damage your
vehicle’s brake lines, suspension,
body and wheels.
[ Use SAE “S” class or wire chains.
[ If you hear noise caused by chains
contacting the body, retighten the
chain to prevent contact with the
vehicle body.
[ To prevent body damage, retighten
the chains after driving 0.3~0.6 miles
(0.5~1.0 km).
[ Do not use tyre chains on vehicles
equipped with aluminium wheels. If
unavoidable, use a wire type chain.
[ Use wire chains less than 0.47 in (12
mm) wide to prevent damage to the
chain’s connection.
Winter Precautions
Use high quality ethylene glycol coolant
Your vehicle is delivered with high
quality ethylene glycol coolant in the
cooling system. It is the only type of
coolant that should be used because it
helps prevent corrosion in the cooling
system, lubricates the water pump and
prevents freezing. Be sure to replace or
replenish your coolant in accordance
with the maintenance schedule. Before
winter, have your coolant tested to
assure that its freezing point is sufficient
for the temperatures anticipated during
the winter.
Check battery and cables
Winter temperatures affect battery
performance. Inspect the battery and
cables, as specified in the chapter
9. The battery charging level can be
checked by a HYUNDAI authorised
repairer or in a service station.
Change to “winter weight” oil if
necessary
In some regions during winter, it is
recommended to use the “winter
weight” oil with lower viscosity. For
further information, refer to the chapter
2. When you are not sure about a type
of winter weight oil, consult a HYUNDAI
authorised repairer.
Page 522 of 649
8-7
08
i Information
Pb
An inappropriately disposed
battery can be harmful to the
environment and human
health. Dispose of the battery
according to your local law(s)
or regulations.
Jump starting procedure
1. Position the vehicles close enough
that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the
engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such
as radios, lights, air conditioning,
etc. Put the vehicles in P (Park, for
automatic transmission/dual clutch
transmission vehicle) or neutral (for
manual transmission vehicle), and set
the parking brakes. Turn both vehicles
OFF.1VQA4001
4. Connect the jumper cables in
the exact sequence shown in the
illustration. First connect one jumper
cable to the red, positive (+) jumper
terminal of your vehicle (1).
5. Connect the other end of the jumper
cable to the red, positive (+) battery/
jumper terminal of the assisting
vehicle (2).
6. Connect the second jumper cable to
the black, negative (-) battery/ chassis
ground of the assisting vehicle (3).
7. Connect the other end of the second
jumper cable to the black, negative (-)
chassis ground of your vehicle (4).
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
8. Start the engine of the assisting
vehicle and let it run at approximately
2,000rpm for a few minutes. Then
start your vehicle.
If your vehicle will not start after a
few attempts, it probably requires
servicing. In this event, please seek
qualified assistance. If the cause of your
battery discharging is not apparent, we
recommend that you have your vehicle
checked by a HYUNDAI authorised
repairer.
Page 561 of 649
9
Battery ........................................................................................................... 9-29For best battery service .......................................................................................... 9-30
Battery capacity label .............................................................................................. 9-31
Battery recharging ................................................................................................... 9-31
Reset items .............................................................................................................. 9-32
Tyres and wheels ........................................................................................... 9-33Tyre care ................................................................................................................... 9-33
Recommended cold tyre inflation pressures ........................................................ 9-34
Check tyre inflation pressure ................................................................................. 9-34
Tyre rotation ............................................................................................................. 9-35
Wheel alignment and tyre balance ........................................................................ 9-36
Tyre replacement..................................................................................................... 9-36
Wheel replacement ................................................................................................. 9-38
Tyre traction ............................................................................................................. 9-38
Tyre maintenance .................................................................................................... 9-38
Tyre sidewall labelling ............................................................................................. 9-38
Low aspect ratio tyres ..............................................................................................9-41
Fuses .............................................................................................................. 9-42Instrument panel fuse replacement ...................................................................... 9-43
Engine compartment panel fuse replacement ..................................................... 9-44
Fuse/relay panel description .................................................................................. 9-45
Light bulbs .....................................................................................................9-59Headlight, Position Light, Turn signal Light bulb replacement ............................9-60
Headlight and front fog light aiming (For Europe) ................................................ 9-65
Side repeater light replacement ............................................................................ 9-70
Rear combination light bulb replacement ............................................................. 9-71
High mounted stop light replacement .................................................................. 9-78
License plate light bulb replacement .................................................................... 9-78
Interior light bulb replacement .............................................................................. 9-79
Appearance care .......................................................................................... 9-80Exterior care ............................................................................................................9-80
Interior care ............................................................................................................. 9-85
Emission control system.............................................................................. 9-88Crankcase emission control system ......................................................................9-88
Evaporative emission control system ....................................................................9-88
Exhaust emission control system ...........................................................................9-89
Page 590 of 649
9-31
09
% D W W H U \ F D S D F L W \ O D E H O
OBC3090062
„ Example
❈ The actual battery label in the vehicle
may differ from the illustration.
1. AGM50L-DIN : The HYUNDAI model
name of battery
2. 12V : The nominal voltage
3. 50Ah (20HR) : The nominal capacity
(in Ampere hours)
4. RC 80 : The nominal reserve capacity
(in min.)
5. CCA 560A : Cold-test current in
amperes by SAE/EN
% D W W H U \ U H F K D U J L Q J
Your vehicle has a maintenance-free,
calcium-based battery.
[ , I W K H E D W W H U \ E H F R P H V G L V F K D U J H G
over a short time (for example, the
headlights or interior lights were on
whilst the vehicle was not in use),
recharge it by slow charging (trickle)
for 10 hours.
[ , I W K H E D W W H U \ J U D G X D O O \ G L V F K D U J H V
because of high electrical load whilst
the vehicle is being used, recharge it
at 20-30A for two hours.
WARNING
When recharging the battery, observe
the following precautions:
[ % H I R U H S H U I R U P L Q J P D L Q W H Q D Q F H R U
recharging the battery, turn off all
accessories and stop the engine.
[ Do not allow cigarettes, sparks, or
flame near the battery.
[ Wear eye protection when checking
the battery during charging.
[ The battery must be removed from
the vehicle and placed in an area with
good ventilation.
[ Watch the battery during charging,
and stop or reduce the charging
rate if the battery cells begin
gassing (boiling) violently or if the
temperature of the electrolyte of any
cell exceeds 49°C (120°F).
[ The negative battery cable must be
removed first and installed last when
the battery is disconnected.
[ Disconnect the battery charger in the
following order.
1. Turn off the main battery charger
switch.
2. Unhook the negative clamp from
the negative battery terminal.
3. Unhook the positive clamp from
the positive battery terminal.
Page 591 of 649
9-32
Maintenance
NOTICE
AGM battery (if equipped)
[ $ E V R U E H Q W * O D V V 0 D W W $ * 0 E D W W H U L H V
are maintenance-free and we
recommend that the AGM battery be
serviced by a HYUNDAI authorised
repairer. For charging your AGM
battery, use only fully automatic
battery chargers that are specially
developed for AGM batteries.
[ : K H Q U H S O D F L Q J W K H $ * 0 E D W W H U \
we recommend that you use parts
for replacement from a HYUNDAI
authorised repairer.
[ ' R Q R W R S H Q R U U H P R Y H W K H F D S R Q
top of the battery. This may cause
leaks of internal electrolyte that
could result in severe injury.
By jump starting
After a jump start from a good battery,
drive the vehicle for at least 30 minutes
or operate at idle for at least 60 minutes
before it is shutoff. The vehicle may
not restart if you shut it off before the
battery had a chance to adequately
recharge. See “Jump Starting” in
chapter 8 for more details on jump
starting procedures.
i Information
$ Q L Q D S S U R S U L D W H O \ G L V S R V H G
E D W W H U \ F D Q E H K D U P I X O W R W K H
H Q Y L U R Q P H Q W D Q G K X P D Q
K H D O W K ' L V S R V H R I W K H E D W W H U \
D F F R U G L Q J W R \ R X U O R F D O O D Z V
R U U H J X O D W L R Q
Reset items
Items should be reset after the battery
has been discharged or the battery has
been disconnected.
[ $ X W R X S G R Z Q Z L Q G R Z
(See chapter 5)
[ 7 U L S F R P S X W H U 6 H H F K D S W H U
[ & O L P D W H F R Q W U R O V \ V W H P
(See chapter 5)