2023 HYUNDAI I20 Mirror
[x] Cancel search: MirrorPage 149 of 649
5-8
Convenient features
Locking
OBC3050001R
To lock :
1. Close all doors, engine bonnet and
tailgate.
2. Carry the smart key.
3. Either press the door handle button
or press the Door Lock button on the
smart key.
4. The hazard warning lights will blink.
Also, the outside rearview mirror
Z L O O I R O G L I S & R Q Y H Q L H Q F H
Page 150 of 649
5-9
05
Unlocking
OBC3050001R
To unlock:
1. Carry the Smart Key.
2. Either press the door handle button or
press the Door Unlock button on the
smart key.
3. The doors will unlock. The hazard
warning lights will blink two times.
Also, the outside rearview mirror will
X Q I R O G L I S & R Q Y H Q L H Q F H
Page 164 of 649
5-23
05
Inside rearview mirror
Before you start driving, adjust the
rearview mirror to the centre on the view
through the rear window.
WARNING
Make sure your line of sight is not
obstructed. Do not place objects in
the rear seat, cargo area, or behind
the rear head restraints which could
interfere with your vision through the
rear window.
WARNING
To prevent serious injury during an
accident or deployment of the air bag,
do not modify the rearview mirror and
do not install a wide mirror.
WARNING
NEVER adjust the mirror whilst driving.
This may cause loss of vehicle control
resulting in an accident.
NOTICE
When cleaning the mirror, use a paper
towel or similar material dampened
with glass cleaner. Do not spray glass
cleaner directly on the mirror as that
may cause the liquid cleaner to enter
the mirror housing.
Day/night rearview mirror
(if equipped)
OBC3050054[A] : Day, [B] : Night
Make this adjustment before you start
driving and whilst the day/night lever is
in the day position.
Pull the day/night lever towards you to
reduce glare from the headlights of the
vehicles behind you during night driving.
Remember that you lose some rearview
clarity in the night position.
0 , 5 5 2 5 6
Page 165 of 649
5-24
Convenient features
Electric Chromic Mirror (ECM)
(if equipped)
OBC3050014
The electric rearview mirror
automatically controls the glare from the
headlamp of the vehicle behind you in
nighttime or low light driving conditions.
When the engine is running, the glare is
automatically controlled by the sensor
(1) mounted in the rearview mirror. The
sensor detects the light level around
the vehicle, and automatically adjusts
to control the headlamp glare from
vehicles behind you.
Whenever the shift button is placed in R
(Reverse), the mirror will automatically
go to the brightest setting in order to
L P S U R Y H W K H G U L Y H UT V Y L H Z E H K L Q G W K H
vehicle.
Outside rearview mirrors
OAI3059018
Be sure to adjust mirror angles before
driving.
Your vehicle is equipped with both left-
hand and right-hand outside rearview
mirrors.
The mirror heads can be folded to
prevent damage during an automatic car
wash or when passing through a narrow
street.
When the vehicle speed is over 9.3 mph
(15 km/h), the outside rearview mirror
will not fold.
WARNING
[ 7 K H U L J K W R X W V L G H U H D U Y L H Z P L U U R U
is convex. In some countries, the
left outside rearview mirror is also
convex. Objects seen in the mirror
are closer than they appear.
[ 8 V H \ R X U L Q W H U L R U U H D U Y L H Z P L U U R U R U
turn your head and look to determine
the actual distance of following
vehicles when changing lanes.
WARNING
Do not adjust or fold the outside
rearview mirrors whilst driving. This
may cause loss of vehicle control
resulting in an accident.
Page 166 of 649
5-25
05
NOTICE
[ ' R Q R W V F U D S H L F H R I I W K H P L U U R U I D F H
this may damage the surface of the
glass.
[ , I W K H P L U U R U L V M D P P H G Z L W K L F H G R
not adjust the mirror by force. Use an
approved spray de-icer (not radiator
antifreeze) spray, or a sponge or soft
cloth with very warm water, or move
the vehicle to a warm place and allow
the ice to melt.
Adjusting the rearview mirror
OIB034041
0 D Q X D O W \ S H L I H T X L S S H G
To adjust an outside mirror, move the
control lever.
OBC3050015R
Electric type (if equipped)
Move the lever (1) to the L (Left) or R
(Right) to select the rearview mirror you
would like to adjust.
Use the mirror adjustment control to
position the selected mirror up, down,
left or right.
NOTICE
[ 7 K H P L U U R U V V W R S P R Y L Q J Z K H Q
they reach the maximum adjusting
angles, but the motor continues to
operate whilst the switch is pressed.
Do not press the switch longer
than necessary, the motor may be
damaged.
[ ' R Q R W D W W H P S W W R D G M X V W W K H R X W V L G H
rearview mirror by hand or the motor
may be damaged.
Page 167 of 649
5-26
Convenient features
Folding the outside rearview mirror
OAI3059020
0 D Q X D O W \ S H L I H T X L S S H G
To fold the outside rearview mirror,
grasp the housing of the mirror and the
fold it toward the rear of the vehicle.
OBC3050016R
Electric type (if equipped)
The outside rearview mirror can be
folded or unfolded by pressing the
switch. When vehicle speed is over 9.3
mph (15 km/h), the outside rearview
mirror will not fold even though the
switch is pressed.
However, the outside rearview mirror
will unfold when the switch is pressed.
[ If 'Convenience J Welcome mirror
JOn door unlock' is selected in
the User Settings mode on the LCD
display, the User Settings mode on the
LCD display, the outside mirror will
fold or unfold automatically as follows:
- The mirror will fold or unfold when
the door is locked or unlocked by the
smart key.
- The mirror will fold or unfold when
the door is locked or unlocked by the
button on the outside door handle.
[ If 'Convenience J Welcome mirror
JOn door unlock' and 'Convenience
J Welcome mirror J On driver
approach' is selected in the User
Settings mode.
If your vehicle is equipped with
additional navigation, please refer
to the infotainment system manual
separately supplied.
NOTICE
The electric type outside rearview
mirror operates even though the
L J Q L W L R Q V Z L W F K L V L Q W K H 2 ) ) S R V L W L R Q
However, to prevent unnecessary
battery discharge, do not adjust the
mirrors longer than necessary whilst
the engine is not running.
NOTICE
Do not fold the electric type outside
rearview mirror by hand. It could cause
motor failure.
Page 192 of 649
5-51
05
2. When the front view camera is
adversely affected by an external
condition. Such examples may
include:
[ When the vehicle’s headlights have
been damaged or not repaired
properly
[ When the vehicle headlights are not
aimed properly
[ When the vehicle is driven on a
narrow curved road or rough road
[ When the vehicle is driven on an
uphill road or downhill road
[ When only part of the vehicle in front
is visible on a crossroad or curved
road
[ When there is a traffic light,
reflecting sign, flashing sign or mirror
[ When the road conditions are bad
such as being wet or covered with
snow
[ When a vehicle suddenly appears
from a curve
[ When the vehicle is tilted from a flat
tyre or being towed
[ : K H Q / D Q H . H H S L Q J $ V V L V W V \ V W H P
warning light illuminates
[ When the light from the oncoming or
front vehicle is not detected because
of exhaust fume, smoke, fog, snow,
etc.
[ When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged
3. When the forward visibility is poor.
Such examples may include:
[ When the headlights of an oncoming
vehicle or a vehicle in front is not
detected due to poor outside
visibility (smog, smoke, dust, fog,
heavy rain, snow, etc.)
[ When the windscreen visibility is
poor WARNING
[ 7 K H I X Q F W L R Q P D \ Q R W Z R U N D U R X Q G
seconds after starting the vehicle or
the initialization or rebooting of the
front view camera.
[ ' R Q R W D W W H P S W W R G L V D V V H P E O H
the front view camera without the
assistance of a HYUNDAI authorised
repairer technician.
If the front view camera is removed
for any reason, the system may need
to be re-calibrated. We recommend
that the system be inspected by a
HYUNDAI authorised repairer.
[ , I W K H Z L Q G V F U H H Q R I \ R X U Y H K L F O H
is replaced, most likely the front
view camera will need to be
re-calibrated. If this occurs, have
your vehicle inspected and have the
system re-calibrated by a HYUNDAI
authorised repairer.
[ % H F D U H I X O W K D W Z D W H U G R H V QT W J H W L Q W R
front view camera unit and do not
remove or damage related parts of
High Beam Assist system.
[ ' R Q R W S O D F H R E M H F W V R Q W K H F U D V K
pad that reflect light such as mirrors,
white paper, etc. The system may
malfunction if sunlight is reflected.
[ $ W W L P H V + L J K % H D P $ V V L V W P D \
not work properly. The system is
for your convenience only. It is the
responsibility of the driver for safe
driving practices and always check
the road conditions for your safety.
[ : K H Q W K H V \ V W H P G R H V Q R W R S H U D W H
normally, change the light position
manually between the high beam and
low beam.
Page 218 of 649
5-77
05
WARNING
Windscreen heating
Do not use the
or position
during cooling operation in extremely
humid weather. The difference
between the temperature of the
outside air and that of the windscreen
could cause the outer surface of the
windscreen to fog up, causing loss of
visibility. In this case, set the mode
selection knob or button to the
position and fan speed control knob or
button to lower speed.
[ ) R U P D [ L P X P G H I U R V W S H U I R U P D Q F H
set the temperature control knob
to the highest temperature setting
(rotated all the way to the right) and
the fan speed control to the highest
setting.
[ , I Z D U P D L U W R W K H I O R R U L V G H V L U H G
whilst defrosting or defogging, set the
mode to the floor-defrost position.
[ % H I R U H G U L Y L Q J F O H D U D O O V Q R Z D Q G L F H
from the windscreen, rear window,
outside rear view mirrors, and all side
windows.
[ & O H D U D O O V Q R Z D Q G L F H I U R P W K H
bonnet and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up inside of the
windscreen.
i Information
, I W K H H Q J L Q H W H P S H U D W X U H L V V W L O O F R O G D I W H U
starting, then a brief engine warm up
period may be required for the vented air
flow to become warm or hot.
Manual climate control system
To defog inside windscreen
OBC3050118
1. Select any fan speed except
"0"position.
2. Select the desired temperature.
3. Select the
or position.
4. The outside (fresh) air will be selected
automatically. Additionally, the
air conditioning (if equipped) will
automatically operate if the mode is
selected to the
position.
If the air conditioning and outside
(fresh) air position are not selected
automatically, press the corresponding
button manually.
WINDSCREEN DEFROSTING AND DEFOGGING