Page 54 of 649
3-17
03
OBC3030010R
Whilst the engine is running, push either
of the switches to warm the driver’s seat
or front passenger’s seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.
[ Each time you push the switch, the
temperature setting of the seat is
changed as follows:
OFF JHIGH () JMIDDLE () JLOW ()
K
[ The seat warmer defaults to the OFF
position whenever the ignition switch
is turned on.
[ When pressing the switch for more
than 1.5 seconds with the seat warmer
operating, the seat warmer will turn
OFF.
Rear Occupant Alert (ROA)
(if equipped)
Rear Occupant Alert is provided to help
prevent the driver from leaving the
vehicle with the rear passenger left in
the vehicle.
System setting
To use Rear Occupant Alert, it must be
enabled from the Settings menu in the
infotainment system screen. Select:
6 H W X S
Page 96 of 649
Instrument cluster .......................................................................................... 4-2Instrument cluster control ........................................................................................ 4-4
Gauges and meters ................................................................................................... 4-5
Transmission shift indicator ...................................................................................... 4-9
Warning and indicator lights ...................................................................................4-10
LCD display messages ............................................................................................. 4-21
LCD display (Type A) ..................................................................................... 4-25LCD display control ................................................................................................. 4-25
LCD display modes.................................................................................................. 4-26
User settings mode ................................................................................................. 4-29
Trip computer .......................................................................................................... 4-36
LCD display (Type B) .................................................................................... 4-40LCD display control ................................................................................................. 4-40
View modes .............................................................................................................. 4-41
Vehicle settings (infotainment system) ................................................................. 4-45
4. Instrument cluster
4
Page 99 of 649
4-4
Instrument cluster
Instrument cluster control
You can adjust the brightness of the
instrument panel illumination form the
User Settings Mode on the LCD display
when the ignition switch is on ('Lights
J Illumination’). When the vehicle’s
parking lights or headlamps are on,
interior switch illumination intensity and
mood lamps are also adjusted.
If your vehicle is equipped with
additional navigation, please refer
to the infotainment system manual
separately supplied.
WARNING
Never adjust the instrument cluster
whilst driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
OCN7040019L
[ The brightness of the instrument panel
illumination is displayed.
[ If the brightness reaches the
maximum or minimum level, an alarm
will sound.
WARNING
Never adjust the instrument cluster
whilst driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
Page 102 of 649
4-7
04
Outside Temperature Gauge
„3.5-Inch
OBC3040003/OTM040013
„10.25-Inch
This gauge indicates the current outside
air temperatures either in Celsius (°C) or
Fahrenheit.
- Temperature range :
-40°C ~ 60°C (-40°F ~ 140°F)
Note that the temperature indicated
on the LCD display may not change
as quickly as the outside temperature(
there may be a slight delay before the
temperature changes.)
You can change the temperature unit
from the Settings menu in the Cluster.
Select:
- Setup J Unit J Temperature Unit
J °C/°F
For vehicles equipped with Automatic
Climate Control, you can also:
- Press the AUTO button whilst pressing
the OFF button on the climate control
unit for 3 seconds
Both the temperature unit on the cluster
LCD display and climate control screen
will change.
Odometer
„3.5-Inch
OPDE046141R/OBC3040030R
„10.25-Inch
The odometer indicates the total
distance that the vehicle has been
driven and should be used to determine
when periodic maintenance should be
performed.
Distance to empty
„3.5-Inch
OOS048469N/OBC3040031R
„10.25-Inch
[ The distance to empty is the estimated
distance the vehicle can be driven
with the remaining fuel.
[ If the estimated distance is below 1 mi.
(1 km), the trip computer will display
“---” as distance to empty.
Page 121 of 649
4-26
Instrument cluster
LCD display modes
Modes Symbol Explanation
Trip
ComputerThis mode displays driving information such as the tripmeter,
fuel economy, etc.
For more details, refer to "Trip Computer" in this chapter.
Turn By
Turn (TBT)
This mode displays the state of the navigation.
Driving
Assist
- Smart Cruise Control
- Drive Attention Warning
- Intelligent Speed Limit Warning
User
Settings
In this mode, you can change settings of the doors, lamps,
etc.
Warning
- This mode displays warning messages related to the
lamp malfunction, etc.
- Tyre pressure information
The information provided may differ depending on which functions are applicable
to your vehicle.
Page 124 of 649
4-29
04
User settings mode
(if equipped)
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver Assistance
2. Cluster
3. Lights
4. Door
5. Convenience
6. Units
7. Language
8. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.
6 K L I W W R 3 W R H G L W V H W W L Q J V ( Q J D J H
S D U N L Q J E U D N H W R H G L W V H W W L Q J V
This warning message illuminates if
you try to select an item from the User
Settings mode whilst driving.
[ $ X W R P D W L F W U D Q V P L V V L R Q , Q W H O O L J H Q W
variable transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
[ 0 D Q X D O W U D Q V P L V V L R Q
For your safety, change the User
Settings after engaging the parking
brake.
4 X L F N J X L G H + H O S
This mode provides quick guides for the
systems in the User Settings mode.
Select an item, press and hold the OK
button.
For more details about each system,
refer to this Owner’s Manual.
Page 130 of 649
4-35
04
8 Q L W V
ItemsExplanation
Speed unitTo select the speed unit. (km/h, MPH)
Temperature unitTo select the temperature unit. (°C,°F)
Fuel Economy unitTo select the fuel economy unit. (km/L, L/100km, MPG)
Tyre Pressure unitTo select the tyre pressure unit. (psi, kPa, bar)
/ D Q J X D J H L I H T X L S S H G
ItemsExplanation
LanguageChoose the language.
5 H V H W
ItemsExplanation
ResetYou can reset the menus in the User Settings Mode. All menus in the
User Settings Mode are reset to factory settings, except language and
service interval
❈ The information provided may differ depending on which functions are applicable
to your vehicle.
Page 132 of 649
![HYUNDAI I20 2023 Owners Manual 4-37
04
Manual reset
To clear the average fuel economy
manually, press the [OK] button on the
steering wheel for more than 1 second
when the average fuel economy is
displayed.
Automatic reset
To a](/manual-img/35/56129/w960_56129-131.png "HYUNDAI I20 2023 Owners Manual 4-37
04
Manual reset
To clear the average fuel economy
manually, press the [OK] button on the
steering wheel for more than 1 second
when the average fuel economy is
displayed.
Automatic reset
To a")
4-37
04
Manual reset
To clear the average fuel economy
manually, press the [OK] button on the
steering wheel for more than 1 second
when the average fuel economy is
displayed.
Automatic reset
To automatically reset the average fuel
economy after refuelling, select the
"Fuel Econ. Reset" mode in the User
Settings menu on the LCD display.
- After ignition: the average fuel
economy will reset automatically
whenever it has passed 4 hours after
turning OFF the engine.
- After refuelling: the average fuel
economy will reset automatically
when driving speed exceeds 1 mph
(1 km/h), after adding 6 litres (1.6
gallons) of fuel or more.
i Information
7 K H D Y H U D J H I X H O H F R Q R P \ P D \ E H
L Q D F F X U D W H Z K H Q W K H Y H K L F O H G U L Y H V
V K R U W H U W K D Q P L O H V P H W H U V D I W H U
W X U Q L Q J 2 1 W K H ( Q J L Q H 6 W D U W 6 W R S E X W W R Q
Instant Fuel Economy (2)
[ This mode displays the instant fuel
economy during the last few seconds
when the vehicle speed is more than
6.2 mph (10 km/h).
Accumulated Info display
„Type A
OJX1040012E
„Type B
OJX1040067E
This display shows the accumulated trip
distance (1), the average fuel economy
(2), and the total driving time (3).
