2023 HONDA ACCORD HYBRID warning

101
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanation
Turn Signal and
Hazard Warning
Indicators•Blinks when you operate the turn signal
lever.
• Blinks along with all turn signals when you
press the hazard warning button.●Does not blink or blinks rapidly - Have your
vehicle checked by a dealer.
Lights On Indicator• Comes on when the parking, tail, and
other external lights are on.2 Light Switches P. 174
High Beam
Indicator•Comes on when the high beam headlights
are on.—
Auto High-Beam
Indicator•Comes on when all the operating
conditions of the auto high-beam are met.2 Auto High-Beam P. 178
23 ACCORD 4D US HEV MAP-3130B6000.book 101 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

102
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanation
System Message
Indicator
•Comes on along with a beep when a
problem is detected. A system message on
the driver information interface appears at
the same time.●While the indicator is on, roll the right selector
wheel to see the message again.
2 Switching the Display P. 119●Refer to the Indicators in formation in this chapter
when a system message appears on the driver
information interface. Respond to the message
accordingly.
●The driver information interface will not return to
the normal screen unless the warning is canceled,
or the right selector wheel is rolled.
ECON Mode
Indicator●Comes on when you set the drive mode to
ECON .2Drive Mode System P. 384
NORMAL Mode
Indicator●Comes on when you set the drive mode to
NORMAL .2Drive Mode System P. 384
SPORT Mode
Indicator
●Comes on when you set the drive mode to
SPORT .●The ambient meter goes off and gauges in the
instrument panel light up in red as long as SPORT
mode is selected.
2 Drive Mode System P. 384
INDIVIDUAL
Mode Indicator●Comes on when you set the drive mode to
INDIVIDUAL .2Drive Mode System P. 384
23 ACCORD 4D US HEV MAP-3130B6000.book 102 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

Continued113
uuGauges and Displays uGauges
Instrument Panel
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Shows certain detected traffic signs while driving.
If speed limit warning is activated, the si gn icon blinks when the maximum speed of
the traffic sign detected is exceeded by a threshold, when compared with the vehicle
speed.
2 Traffic Sign Recognition System P. 473
■Outside Temperature
■Traffic Sign Recognition System
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust fr om another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
1 Adjusting the outside temperature display
You can adjust the temperature reading.
2 Customized Features P. 318
1Traffic Sign Recognition System
The default speed limit wa rning threshold is the
maximum speed of the traffic sign detected.
You can adjust the threshol d for speed limit warning.
2 Customized Features P. 318
23 ACCORD 4D US HEV MAP-3130B6000.book 113 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

118
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
Driver Information Inte rface (Right Side Area)
The driver information interface shows information such as the estimated travelable
distance and fuel economy of the vehicle. It also displays messages such as warnings
and other helpful information.
When a warning message displays, please check the message and contact a dealer
to have the vehicle inspected if necessary . Please refer to the pages below if the
Engine oil pressure low , Engine temperature too hot or Limited stopping
power! message is displayed.
2If the Engine oil pressure low Warning Appears P. 585
2 Overheating P. 582
2 If the Limited stopping power Warning Appears P. 586
23 ACCORD 4D US HEV MAP-3130B6000.book 118 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

119
uuGauges and Displays uDriver Information Interface (Right Side Area)
Continued
Instrument Panel
Roll the right selector wheel to view different types of content.
■Switching the Display1Switching the Display
You can add or delete the meter contents.
2 Gauge Display Settings P. 132
Right Selector
WheelWarning Messages
P. 134
Range/Fuel/
Trip Meter
P. 121
No Content Driver Attention
Monitor
P. 125
Navigation
P. 124
Speed/Time/
Trip Meter
P. 123
Gauge Display Settings
P. 132
Maintenance
P. 128
Safety Support
P. 129 Seat Belts
P. 128
Head-Up Display
Settings
*
P. 136 Brightness
Setting
P. 131
Vehicle Stability
Assist Mode
P. 131Power Flow
Monitor
P. 120
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book 119 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

uuGauges and Displays uDriver Information Interface (Right Side Area)
134
Instrument Panel
■Change gauge design
You can change the gauge design. 1.Press the right selector wheel when you
select the Gauge display settings on the
driver information interface.
2. Roll the right selector wheel to scroll to
select Gauge design , then press the right
selector wheel.
3. Roll the right selector wheel to scroll to
select your desired settings, then press the
right selector wheel.
You can check if there are any active warning messages.1 Change gauge design
When using the Round minimal or Bar minimal
gauge design, a simplified display is used when ACC
with Low Speed Follow is in operation.
■Warnings1 Warnings
If there are multiple warnings, you can roll the right
selector wheel to see other warnings.
23 ACCORD 4D US HEV MAP-3130B6000.book 134 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

135
uuGauges and Displays uHead-Up Display*
Continued
Instrument Panel
Head-Up Display*
Shows the current mode for ACC with Low Speed Follow, LKAS, and Traffic Jam
Assist; compass or turn-by-turn directions ; and vehicle speed. You can choose which
item to be displayed using the driver info rmation interface. They are displayed when
the power mode is in ON. The display also shows the following
messages.
•Lane Departure Warning: When your
vehicle is too close to the traffic lane lines,
the lane departure warning appears.
2 Road Departure Mitigation System
P. 465
2 Lane Keeping Assist System (LKAS)
P. 445
2 Traffic Jam Assist P. 456
•Head-up Warning Lights:
Flash when the BRAKE message appears
on the driver information interface.
2 Collision Mitigation Braking SystemTM
(CMBSTM) P. 406
2 Low Speed Braking Control* P. 418
2 Adaptive Cruise Control (ACC) with
Low Speed Follow P. 424
Lane Departure Warning
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book 135 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

uuGauges and Displays uHead-Up Display*
136
Instrument Panel
• Traffic Sign Recognition System: Shows
certain detected traffic signs while driving.
If speed limit warning is activated, the sign
icon blinks when th e maximum speed of
the traffic sign detect ed is exceeded by a
threshold, when compar ed with the vehicle
speed.
2 Traffic Sign Recognition System P. 473
Shows the display for changing the head-up display settings on the driver
information interface.
Roll the right selector wheel to scroll to select Head-Up Display settings, then
press the right selector wheel.
2 Switching the Display P. 119
Traffic Sign Recognition System
■Head-Up Display Settings
1Head-Up Display*
The default speed limit wa rning threshold is the
maximum speed of the traffic sign detected.
You can adjust the threshol d for speed limit warning.
2 Customized Features P. 318
1Head-Up Display Settings
HUD content
2 To change head-up display content P. 137
HUD brightness 2 Adjusting the head-up display brightness
P. 138
HUD height 2 Adjusting the head-up display height
P. 138
HUD rotation 2 Adjusting the head-up display angle P. 138
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book 136 ページ ２０２２年１０月１３日　木曜日　午後４時５０分