2023 GENESIS GV60 window

9-42
Maintenance
Instrument panel fuse panel
Fuse NameFuse Rating Circuit Protected
SAFETY P/
WINDOW LH30ARear Safety Power Window Module LH,
Driver Safety Power Window Module
E-LSD20A ELSD Unit
IG3 710AInstrument Cluster, CCU, A/C Controller, PM Sensor, CCIC
Head Unit, Incar Temperature Sensor, DCU, A/C PTC
Heater, A/C Control Module, Charger IND
MODULE 810ADriver/Passenger Door DSM Monitor, Driver/Passenger
Outside Mirror Unit
LIFTGATE
OPEN10A Liftgate Relay
MODULE 77.5A Head Lamp LH/RH, Passenger Power Seat Module
A/BAG IND7.5A Overhead Console
CLUSTER7.5A Instrument Cluster, Head-Up Display
MEMORY 110ADriver Door Mood Lamp #1/#2/#3 (Handle/Garnish/
Pocket), Passenger Door Mood Lamp #1/#2/#3 (Handle/
Garnish/Pocket), Rear Door Mood Lamp LH #1/#2 (Handle/
Garnish), Rear Door Mood Lamp RH #1/#2 (Handle/
Garnish)
A/C CONTROLLER, HUD, A/C CONTROL MODULE,
SECURITY IND , CLUSTER, MOOD LP MASTER, ADAS
UNIT(PARKING)
MODULE 110AData Link Connector, Multifunction Switch, CCIC
Keyboard, Rain Sensor, BLE Unit, Interior UBW Unit
#1/#2/#3, Front UWB Unit LH/RH, AFCU, P/R Junction
Block (RLY.9), Driver/Passenger Door Outside Handle,
Face Recognition Unit, Driver Power Window Switch,
Driver Power Outside Mirror Switch, Rear UWB Unit LH/
RH, Driver/Passenger Outside Mirror Unit, Power Liftgate
Unit, Driver Power Seat Module, Driver Power Seat Switch,
Driver Lumbar Support Motor, Passenger Power Seat
Module, Passenger Power Seat Switch
S/HEATER FRT25APassenger Power Seat Module, Front Seat Warmer Control
Module, Front Air Ventilation Seat Control Module, Driver
Power Seat Module

9-44
Maintenance
Instrument panel fuse panel
Fuse NameFuse Rating Circuit Protected
WIPER FRT 215A Multifunction Switch
SPEAR (IG2)10A Not Used
MODULE 37.5AStop Lamp Switch, IAU, IBU, CCU, Multifunction Switch,
Driver/Passenger Door DSM Monitor, Driver Power
Window Switch, Overhead Console
MULTIMEDIA25A CCIC Head Unit
AIRBAG 210A SRS Control Module
START7.5A VCU, IBU
A/C 210A A/C Control Module

9-56
Maintenance
NOTICE

[Do not use strong soap, chemical
detergents or hot water, and do not
wash the vehicle in direct sunlight
or when the body of the vehicle is
warm.

[Be careful when washing the side
windows of your vehicle.

[Especially, with high-pressure water,
water may leak through the windows
and wet the interior.

[To prevent damage to the plastic
parts, do not clean with chemical
solvents or strong detergents.
NOTICE
OJWEV091026N

[Water washing in the motor
compartment including high
pressure water washing may cause
the failure of electrical circuits
located in the vehicle compartment.

[Never allow water or other liquids
to come in contact with electrical/
electronic components inside the
vehicle as water or other liquids may
flow in to the motor compartment
through the front trunk and damage
electrical/electronic components.
NOTICE
Matte paint finish vehicle (if equipped)
Automatic car wash which uses rotating
brushes should not be used as this can
damage the surface of your vehicle. A
steam cleaner which washes the vehicle
surface at high temperature may result
the oil to adhere and leave stains that is
difficult to remove.
Use a soft cloth (for example, microfiber
towel or sponge) when washing your
vehicle and dry with a microfiber towel.
When you hand wash your vehicle, you
should not use a cleaner that finishes
with wax. If the vehicle surface is too
dirty (sand, dirt, dust, contaminant,
etc.), clean the surface with water
before washing the car.
Waxing
A good coat of wax is a barrier between
your paint and contaminate. Keeping
a good coat of wax on your vehicle will
help protect it.
Wax the vehicle when water will no
longer bead on the paint.
Always wash and dry the vehicle before
waxing. Use a good quality liquid or
paste wax, and follow the manufacturer’s
instructions. Wax all metal trim to protect
it and to maintain its luster.
Removing oil, tar, and similar materials
with a spot remover will usually strip the
wax from the finish. Be sure to re-wax
these areas even if the rest of the vehicle
does not yet need waxing.

9-62
Maintenance
Interior wooden trim

[Use a wooden furniture protector (for
example, wax, coating compound) to
clean the interior wooden trim.

[Often wipe the interior wooden
trim with a lint-free, clean cloth to
maintain the unique wooden textures
for a longer period of time.

[If you spill beverage (for example,
water, coffee) over the interior
wooden trim, immediately wipe it with
clean, dry cloth.

[Sharp objects (for example, driver,
knife), adhesive materials, or tapes
may damage the interior wooden trim.

[Any strong impacts may damage the
interior wooden trim.

[If the coating finish over the interior
wooden trim is removed, moisture
may damage or change wood traits.

[If the interior wooden trim is
damaged, you may get a splinter from
the wood surface. Therefore, you
should immediately have replaced
the damaged interior wooden trim.
Contact an authorized Retailer of
Genesis Branded Products.

[Forged wood is an eco-friendly
wooden trim made from recycled
wood chips. Due to these material
characteristics, the grain direction is
not constant and small dots or natural
cracks may occur. These are natural
appearance characteristics of real
wood from the manufacturing method
and are not appearance defects.
Cleaning the seat belt webbing
Clean the belt webbing with any
mild soap solution recommended for
cleaning upholstery or carpet. Follow
the instructions provided with the soap.
Do not bleach or re-dye the webbing
because this may weaken the seat belt.
Cleaning the interior window glass
If the interior glass surfaces of the
vehicle become fogged (that is, covered
with an oily, greasy or waxy film), they
should be cleaned with glass cleaner.
Follow the directions on the glass cleaner
container.
NOTICE
Do not scrape or scratch the inside of
the rear window. This may result in
damage to the rear window defroster
grid.