Page 356 of 676

6-46
Driving Your Vehicle
Multi-Chamber Air Suspension
Malfunction
OJWEV061048L
This message is displayed when there is
a malfunction with the Multi-chamber
air suspension system. Have the vehicle
inspected by an authorized retailer of
Genesis Branded products.
CAUTION
[ When adjusting vehicle height, check
if there are any obstacles below or
above the vehicle.
[ If air inside the suspension is
discharged, a warning message
will be displayed. If so, stop driving
and use a towing vehicle. Since
the vehicle height will be very low,
projections on the road may damage
the vehicle. See ‘Towing when the
air suspension malfunctions’ before
towing the vehicle.
Information
[ Operating the air suspension may
cause a little noise when charging and
discharging the air.
[ Adjusted vehicle height may vary
depending on the temperature and
surrounding environment.
[ When the suspension warning message
is displayed, the system enables safe
mode to prevent secondary failure
and the vehicle performance may be
displayed differently.
[ When the vehicle is parked on a slope,
or when the vehicle is in unstable
condition due to sudden acceleration,
deceleration or steering, vehicle height
adjustment becomes temporarily
disabled. If the vehicle escapes from
such dangerous situation, vehicle height
adjustment is enabled again.
[ When the vehicle is lifted up with a
lift or jack, height adjustment may be
disabled to protect the system. If the
vehicle engine is started or you start
driving, the function is enabled again.
[ Leaving the vehicle parked for long
time may lower the vehicle height. The
vehicle height returns to its original
position when the engine is started.
[ If the battery is either overcharged or
discharged, vehicle height adjustment
is disabled to protect the system and a
temporary warning message may be
displayed.
[ If the vehicle height adjustment is
operated repeatedly, the function may
be temporarily disabled due to the
overheated compressor. It is to prevent
the breakdown of related parts.
Page 357 of 676

6-47
06
Additional Height Adjustment
Function
Multi-chamber air suspension recognizes
the driving condition to automatically
adjust vehicle height, spring stiffness,
and shock absorber damping force for
driving comfort and vehicle protection.
Additional vehicle height adjustment
operates automatically depending
on various conditions and it is not
necessarily displayed to the driver.
Off road driving
ORS061027
The vehicle adjusts vehicle height, spring
stiffness, and shock absorber damping
force when driving on a rough terrain
such as an unpaved road, to optimize
comfort and protect the vehicle.
Driving on a slope
ORS061028
The vehicle adjusts vehicle height, spring
stiffness, and shock absorber damping
force when driving over a steep slope,
to optimize comfort and protect the
vehicle.
Information
[ Additional vehicle height adjustment
function operates differently
depending on various driving and
system conditions. In some cases, its
operability and actuation speed may
vary.
[ When the vehicle speed is below 6 mph
(10 km/h) or above 37 mph (60 km/h),
the safety bump driving function may
be disabled.
[ When the vehicle speed is above 18
mph (30 km/h), the off road driving
and slope driving function may be
disabled.
Page 360 of 676

6-50
Driving Your Vehicle
In the Auto Stop mode, if the engine
hood is opened, ISG system will be
deactivated.
When the system is deactivated, a
message ‘Auto Stop is off. Shift to P or
N to start engine manually’ appears on
the cluster LCD display with a warning
sound.
If this occurs, depress the brake pedal
and restart the engine manually.
Auto start
When the engine stops automatically by
ISG, the engine will restart if one of the
following is done.
-Release the brake pedal.
-When Auto Hold is activated, take
your foot off the brake pedal and then
depress the accelerator pedal.
-While depressing the brake pedal,
shift the gear from N (Neutral) or D
(Drive) to R (Reverse) or P (Park).
-While depressing the brake pedal,
shift the gear from N (Neutral) to D
(Drive).
The Auto Stop (
) indicator turns into
white on the instrument cluster, when
the engine is restarted.
LCD display messages
The messages are displayed on the
instrument cluster to help use ISG
system.
ORS061032L
Auto Stop is Off. Shift to P or N and start
engine manually
When the system is deactivated, a
message will appear on the cluster LCD
display with a warning sound in the
following situations.
-When the engine hood is opened.
-When ISG system is not working
normally.
If this occurs, depress the brake pedal
and restart the engine manually. For your
safety, restart the vehicle in the P (Park)
position.
Page 361 of 676
6-51
06
ORS061049L
AUTO STOP elapsed time
AUTO STOP display shows the elapsed
time of engine stop by the Idle Stop and
Go system.
You may check AUTO STOP elapsed time
in the Normal view on the instrument
cluster.
Refer to “View Modes” section in chapter
4.
ISG System Off
ORS061022L
Press the ISG OFF button to turn off ISG
system. The ISG OFF button indicator will
illuminate. To use the system, press the
ISG OFF button again.
Page 367 of 676