2023 GENESIS G90 instrument cluster

6-51
06
ORS061049L
AUTO STOP elapsed time
AUTO STOP display shows the elapsed
time of engine stop by the Idle Stop and
Go system.
You may check AUTO STOP elapsed time
in the Normal view on the instrument
cluster.
Refer to “View Modes” section in chapter
4.
ISG System Off
ORS061022L
Press the ISG OFF button to turn off ISG
system. The ISG OFF button indicator will
illuminate. To use the system, press the
ISG OFF button again.

6-52
Driving Your Vehicle
Forced to Restart Engine
The engine is automatically restarted in
the following situations.

[The engine has stopped for about 5
minutes

[The air conditioning is ON with the fan
speed set to a certain high level

[The front defroster is ON

[The battery is weak

[The cooling and heating performance
of the climate control system is
unsatisfactory

[The vehicle is shifted to P (Park), N
(Neutral) or R (Reverse) when Auto
Hold is operating

[The door is opened or the seatbelt
is unfastened when Auto Hold is
activated

[The EPB switch is pressed when Auto
Hold is activated
The Auto Stop (
) indicator blinks in
green for 5 seconds on the instrument
cluster when the engine is restarted.
WARNING
When the engine is in Idle Stop mode,
the engine may restart without the
driver taking any action. Before leaving
the vehicle or working on the engine
compartment, turn off the engine by
pressing the ENGINE START/STOP
button to the OFF position.
ISG Malfunction
ISG system may not operate when there
is a malfunction with the ISG sensors or
ISG system.
The following will occur, when there is a
malfunction with the ISG system:

[The Auto Stop (
) indicator will
illuminate in yellow on the instrument
cluster.
Contact an authorized retailer of Genesis
Branded products.

6-57
06
Limitations of the System
The predictive shift may have limited
operation in the following situations

[If you do not take the route guided in
the navigation, predictive shift may
not operate properly since the system
operates according to the navigated
route. Predictive shift will operate
properly again once the navigation
sets a new route.

[The navigation may reflect the real
time traffic condition and change the
route. If so, the predictive shift may
not correspond temporarily to the
current driving condition.

[If the destination is not set on the
navigation, predictive shift operates
according to the route which is most
likely to be taken. When driving
through roads such as a branch road,
predictive shift may not correspond to
the current driving condition until the
navigation sets a new route.

[While using the navigation app
through smart phone linked functions
such as Android Auto or Apple
CarPlay, predictive shift operates as
when the destination is not set in the
vehicle’s navigation.

[Predictive shift may not operate
properly in the following situations.
-Navigation system is not completely
booted.
-Real time GPS or map data has
errors, or the map data is not up to
date.
Checking Operation on the
Instrument Cluster
The operating condition of predictive
shift can be checked from the icons and
messages displayed on the instrument
cluster. If there are multiple conditions
detected, every related icon illuminates
but only the most important message
is displayed. The images and colors
of the messages may differ from the
description depending on the cluster
type.
CAUTION
Always be aware of the traffic and
road condition ahead. Checking the
instrument cluster while driving
may cause an accident.
When predictive shift is ready
ORS062039N
Refer to the following for icons displayed
when predictive shift is stand-by for use.

6-60
Driving Your Vehicle
Predictive shift in roundabout
If there is a roundabout ahead, the
predictive shift downshifts the gear
before entering the roundabout to assist
the driver to go through the roundabout
smoothly and reaccelerate the vehicle.
Predictive shift to accelerate when
entering highways (Interchange/Junction)
When entering the main road of
highways, the drive mode is temporarily
changed to SMART SPORT at the
interchange or junction to assist the
vehicle to accelerate easily.
-It also operates when entering an
expressway.
-While the SMART SPORT mode is
on, the red ‘SMART’ message will
illuminate on the instrument cluster.
-The drive mode will revert back to
SMART ECO or SMART COMFORT
when the vehicle has completely
entered the highways.
-Predictive shift operates only when
the vehicle is accelerated sufficiently
at the highways interchange or
junction to enter the main road. It
does not operate if the vehicle speed
is low.
-When entering the highways ramp
with the vehicle in SMART ECO mode,
the drive mode will automatically
change to SMART COMFORT. The
white ‘SMART’ message will illuminate
on the cluster.
-When predictive shift is operating, the
acceleration performance is equal to
that of when SPORT mode is selected
by pressing the drive mode button.
Predictive shift when approaching a
vehicle ahead
If the speed of the vehicle ahead is low
and the distance is getting closer, the
engine brake is engaged automatically to
assist in deceleration.
-When the vehicle reaches an
appropriate distance and the speed is
equal to the vehicle ahead, predictive
shift will be finished.
-If the brake or accelerator pedal
is depressed while predictive shift
is operating, the function will be
temporarily disabled.
-If there is a large difference of speed
from the vehicle ahead, the engine
brake may be engaged greatly to
obtain appropriate vehicle-to-vehicle
distance.
CAUTION
‘Predictive Shift when Approaching
to Vehicle Ahead’ is a function to
assist deceleration by detecting
the speed difference with the
vehicle ahead and does not directly
prevent collision. If the vehicle
ahead abruptly decelerates and
the distance rapidly decreases, the
driver must depress the brake pedal
to decelerate.

6-62
Driving Your Vehicle
ECO, COMFORT, SPORT Mode
Features
ECO mode (if equipped)
ECO mode helps improve fuel
efficiency for eco-friendly
driving.
Fuel efficiency varies according
to the driver's driving habit and
road condition.

[When ECO mode is selected, the
ECO indicator will illuminate on the
instrument cluster.

[When ECO mode is activated:
-The acceleration response may be
slightly reduced if the accelerator
pedal is depressed moderately.
-The air conditioner performance
may be limited.
-The shift pattern of the automatic
transmission may change.
-Engine noise may be louder at some
automatic transmission shifts as
down-shift requires pressing down
more on the accelerator.
The above situations are normal
conditions when ECO mode is activated
to help improve fuel efficiency.
COMFORT mode
COMFORT mode provides smooth
driving and comfortable riding.
SPORT mode
SPORT mode provides sporty
but firm riding.
In SPORT mode, the fuel
efficiency may decrease.

[When SPORT mode is selected, the
SPORT indicator will illuminate on the
instrument cluster.

[Whenever the engine is restarted,
the drive mode will revert back to
COMFORT mode. If SPORT mode is
desired, re-select SPORT mode.

[When SPORT mode is activated:
-The engine RPM will tend to remain
raised over a certain length of time
even after releasing the accelerator
-Upshifts are delayed when
accelerating
NOTICE
In the SPORT mode, the fuel efficiency
may decrease.

7-8
Driver Assistance System
CAUTION

[The setting of the Warning Timing
DQG:DUQLQJ9ROXPHDSSOLHVWR
all functions of Forward Collision-
$YRLGDQFH$VVLVW

[(YHQWKRXJK
S6WDQGDUG
TLVVHOHFWHG
IRU:DUQLQJ7LPLQJLIDGHWHFWHG
YHKLFOHLQIURQWVXGGHQO\VWRSVWKH
ZDUQLQJPD\VHHPODWH

[6HOHFW
S/DWH
TIRU:DUQLQJ7LPLQJ
ZKHQWUDIILFLVOLJKWDQGZKHQGULYLQJ
VSHHGLVVORZ
)RUZDUG&ROOLVLRQ$YRLGDQFH
Assist operation
Basic function
The basic function for Forward Collision-
Avoidance Assist is to warn and help
control the vehicle depending on the
collision risk level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
ORS071096L
Collision Warning

[To warn the driver of a collision, the
‘Collision Warning’ warning message
will appear on the instrument cluster,
an audible warning will sound and the
steering wheel will vibrate.

[If a vehicle or powered two-wheeler
is detected in front, the function will
operate when your vehicle speed is
between approximately 6-124 mph
(10-200 km/h).

[If a pedestrian or cyclist is detected
in front, the function will operate
when your vehicle speed is between
approximately 6-53 mph (10-85 km/h).

7-9
07
ORS071097L
Emergency Braking
To warn the driver that emergency
braking will be assisted, the ‘Emergency
Braking’ warning message will appear
on the instrument cluster, an audible
warning will sound and the steering
wheel will vibrate.
Emergency braking will operate under
the following conditions.

[Vehicle or powered two-wheeler:
'ULYLQJYHKLFOHStopped
YHKLFOH
Weak
braking
powerApproximately 6-125 mph
(10-200 km/h)*
Strong
braking
powerApproximately
6-81 mph
(10-130 km/h)*Approximately
6-47 mph
(10-75 km/h)
(6-62 mph
(10-100 km/h))*
*: If Forward Collision-Avoidance Assist judges that
avoiding a collision is difficult even by changing
the driving lane. The function operate range may
decrease due to surroundings of the vehicle. (if
equipped)

[Pedestrian or cyclist:
The function will operate when
your vehicle speed is between
approximately 6-40 mph (10-65
km/h).
ORS071102L
6WRSSLQJYHKLFOHDQGHQGLQJEUDNHFRQWURO

[When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the instrument cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.

[Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.

7-10
Driver Assistance System
Junction Turning function
Junction Turning function will warn and
control the vehicle depending on the
collision risk level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
ORS071098L
Collision Warning

[To warn the driver of a collision, the
‘Collision Warning’ warning message
will appear on the instrument cluster,
an audible warning will sound and the
steering wheel will vibrate.

[The function will operate when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the oncoming vehicle or powered
two-wheeler speed is between
approximately 19-44 mph (30-70
km/h).
ORS071099L
Emergency Braking

[To warn the driver that emergency
braking will be assisted, the
‘Emergency Braking’ warning
message will appear on the
instrument cluster, an audible warning
will sound and the steering wheel will
vibrate.

[In emergency braking situation,
braking is assisted with strong braking
power by the function to help prevent
collision with the oncoming vehicle.

[The function will operate when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the oncoming vehicle or powered
two-wheeler speed is between
approximately 19-44 mph (30-70
km/h).