Page 452 of 676
7-63
07
Displaying speed limit
ORS072090N
Speed limit information is displayed on
the instrument cluster.
Information
[ , I V S H H G O L P L W L Q I R U P D W L R Q R I W K H U R D G
cannot be recognized, '---' sign will be
G L V S O D \ H G 5 H I H U W R / L P L W D W L R Q V R I
, Q W H O O L J H Q W 6 S H H G / L P L W $ V V L V W L I W K H
road signs are difficult to recognize.
[ , Q W H O O L J H Q W 6 S H H G / L P L W $ V V L V W S U R Y L G H V
additional road sign information in
D G G L W L R Q W R V S H H G O L P L W 7 K H D G G L W L R Q D O
U R D G V L J Q L Q I R U P D W L R Q S U R Y L G H G P D \
vary according to your country.
[ The images and colors in the
instrument cluster may differ
G H S H Q G L Q J R Q W K H F O X V W H U W \ S H R U W K H P H
selected from the settings menu.
Warning overspeed
ORS072091N
When driving at a speed higher than the
displayed speed limit, the speed limit is
displayed in red.
Changing set speed
ORS072151NORS072152N
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or – switch on the steering wheel.
Page 465 of 676
7-76
Driver Assistance System
Smart Cruise Control Settings
Based on Driving Style
ORS071258L
With the engine on, if ‘Driver Assistance
Page 467 of 676
7-78
Driver Assistance System
Operating conditions for
Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left while Smart Cruise Control
is operating, and the following conditions
are satisfied:
[ Your vehicle speed is above 40 mph
(60 km/h)
[ A vehicle is detected in front of your
vehicle
Overtaking Acceleration Assist does not
operate in the following conditions.
[ The hazard warning flasher is on
[ Vehicle speed is reduced to maintain
distance with the vehicle in front
: $ 5 1 , 1 *
When the turn signal indicator is turned
R Q W R W K H O H I W Z K L O H W K H U H L V D Y H K L F O H
D K H D G W K H Y H K L F O H P D \ D F F H O H U D W H
W H P S R U D U L O \ 3 D \ D W W H Q W L R Q W R W K H U R D G
F R Q G L W L R Q V D W D O O W L P H V
Turning on Smart Cruise Control
ORS071025
[ Press the Driving Assist button to turn
on Smart Cruise Control. The speed
will be set to the current speed on the
cluster.
[ If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
, I \ R X U Y H K L F O H V S H H G L V E H W Z H H Q P S K
N P K Z K H Q \ R X S U H V V W K H ' U L Y L Q J
$ V V L V W E X W W R Q W K H V H W V S H H G Z L O O E H V H W W R
P S K N P K
Page 468 of 676
7-79
07
Setting vehicle distance
ORS071186
Each time the button is pressed, the
headway changes as follows:
Distance 4 Distance 3
Distance 1Distance 2
Information
[ , I \ R X G U L Y H D W P S K N P K W K H
distance is maintained as follows:
' L V W D Q F H
D S S U R [ L P D W H O \ I W P
' L V W D Q F H
D S S U R [ L P D W H O \ I W P
Distance 2 -
D S S U R [ L P D W H O \ I W P
' L V W D Q F H
D S S U R [ L P D W H O \ I W P
[ The distance is set to the last set
distance when the engine is restarted,
or when Smart Cruise Control was
W H P S R U D U L O \ F D Q F H O H G
Increasing set speed
ORS071182
[ Push the + switch up and release
it immediately. The set speed will
increase by 1 mph (1 km/h) each time
the switch is operated in this manner.
[ Push the + switch up and hold it while
monitoring the set speed on the
cluster. The set speed will increase by
5 mph (10 km/h) each time the switch
is operated in this manner. Release
the switch when the desired speed is
shown, and the vehicle will accelerate
to that speed. You can set the speed
to 120 mph (200 km/h).
: $ 5 1 , 1 *
& K H F N W K H G U L Y L Q J F R Q G L W L R Q E H I R U H
X V L Q J W K H V Z L W F K ' U L Y L Q J V S H H G P D \
V K D U S O \ L Q F U H D V H Z K H Q \ R X S X V K X S D Q G
K R O G W K H V Z L W F K
Page 469 of 676
7-80
Driver Assistance System
Decreasing set speed
ORS071183
[ Push the - switch down and release
it immediately. The set speed will
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.
[ Push the - switch down and hold it
while monitoring the set speed on the
cluster. The set speed will decrease by
5 mph (10 km/h) each time the switch
is operated in this manner.
Release the switch at the speed you
want to maintain. You can set the
speed to 20 mph (30 km/h).
Temporarily cancelling Smart Cruise
Control
ORS071289L
Press the switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
Resuming Smart Cruise Control
ORS071184
To resume Smart Cruise Control after the
function was canceled, operate the +, -
or
switch.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you press the
switch, vehicle
speed will resume to the preset speed.
: $ 5 1 , 1 *
& K H F N W K H G U L Y L Q J F R Q G L W L R Q E H I R U H
using the V Z L W F K ' U L Y L Q J V S H H G
P D \ V K D U S O \ L Q F U H D V H R U G H F U H D V H Z K H Q
\ R X S U H V V W K H
V Z L W F K
Page 470 of 676
7-81
07
Turning off Smart Cruise Control
ORS071025
Press the Driving Assist button to turn
Smart Cruise Control off.
Information
, I \ R X U Y H K L F O H L V H T X L S S H G Z L W K 0 D Q X D O
6 S H H G / L P L W $ V V L V W S U H V V D Q G K R O G W K H
Driving Assist button to turn off Smart
& U X L V H & R Q W U R O + R Z H Y H U 0 D Q X D O 6 S H H G
Limit Assist will turn on.
CAUTION
' R Q R W X V H W K H V Z L W F K H V D Q G E X W W R Q V
D W W K H V D P H W L P H 6 P D U W & U X L V H & R Q W U R O
P D \ Q R W R S H U D W H S U R S H U O \
Displaying operating status
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
ORS072145N
A: Operating,
B: Temporarily canceled
[ When operating
(1) Whether there is a vehicle ahead
and the selected distance level
(2) Set speed
(3) Whether there is a vehicle ahead
and the target vehicle distance
[ When temporarily canceled
(1) Your vehicle (shaded)
(2) Previous set speed (shaded)
(3) Vehicle ahead and distance level
(shaded)
Page 471 of 676
7-82
Driver Assistance System
Information
[ The distance of the front vehicle on the
F O X V W H U L V G L V S O D \ H G D F F R U G L Q J W R W K H
actual distance between your vehicle
and the vehicle ahead.
[ The target distance may vary according
W R W K H Y H K L F O H V S H H G D Q G W K H V H W
G L V W D Q F H O H Y H O , I W K H Y H K L F O H V S H H G L V
low, even though the vehicle distance
have changed, the change of the target
vehicle distance may be small.
[ The images and colors in the
instrument cluster may differ
G H S H Q G L Q J R Q W K H F O X V W H U W \ S H R U W K H P H
selected from the settings menu.
Accelerating temporarily
ORS072147N
If you want to speed up temporarily
without altering the set speed while
Smart Cruise Control is operating,
depress the accelerator pedal. While the
accelerator pedal is depressed, the set
speed, distance level and target distance
will blink on the cluster.
However, if the accelerator pedal is
depressed insufficiently, the vehicle may
decelerate.
: $ 5 1 , 1 *
% H F D U H I X O Z K H Q D F F H O H U D W L Q J
W H P S R U D U L O \ E H F D X V H W K H V S H H G D Q G
G L V W D Q F H L V Q R W F R Q W U R O O H G D X W R P D W L F D O O \
H Y H Q L I W K H U H L V D Y H K L F O H L Q I U R Q W R I \ R X
Page 472 of 676
7-83
07
Based on Driving Style operation
ORS071094LORS072148N
When Based on Driving Style is
operating, ‘Driving Style Adaptive SCC’
message will appear on the cluster for
2 seconds, and the distance level and
target distance will be displayed based
on the driving style.
Temporarily cancelling Smart Cruise
Control
ORS071118L
Smart Cruise Control will be temporarily
canceled automatically when:
[ The vehicle speed is above 130 mph
(210 km/h)
[ The vehicle is stopped for a certain
period of time
[ The accelerator pedal is continuously
depressed for a certain period of time
[ The conditions for Smart Cruise
Control to operate is not satisfied
If Smart Cruise Control is temporarily
canceled automatically, the ‘Smart
Cruise Control deactivated’ warning
message will appear on the cluster, and
an audible warning will sound to warn
the driver.
Information
, I 6 P D U W & U X L V H & R Q W U R O L V W H P S R U D U L O \
canceled while the vehicle is at a
standstill with the function activated,
( 3 % ( O H F W U R Q L F 3 D U N L Q J % U D N H P D \ E H
D S S O L H G
: $ 5 1 , 1 *
When Smart Cruise Control is
W H P S R U D U L O \ F D Q F H O H G G L V W D Q F H Z L W K W K H
I U R Q W Y H K L F O H Z L O O Q R W E H P D L Q W D L Q H G
$ O Z D \ V K D Y H \ R X U H \ H V R Q W K H U R D G
Z K L O H G U L Y L Q J D Q G L I Q H F H V V D U \ G H S U H V V
W K H E U D N H S H G D O W R U H G X F H \ R X U G U L Y L Q J
speed in order to maintain a safe
G L V W D Q F H
