Page 278 of 661
5-84
Convenience Features
Turn signals and lane change signals
ORG3EV051074
To signal a turn, push down on the lever
for a left turn or up for a right turn in
position (A).
If an indicator stays on and does not flash
or if it flashes abnormally, one of the turn
signal bulbs may be burned out and will
require replacement.
One touch turn signal
To use One Touch Turn Signal push the
turn signal lever up or down to position
(B) and then release it.
The lane change signals will blink 3, 5 or
7 times.
You can enable the One Touch Turn
Signal function or choose the number
R I E O L Q N L Q J E \ V H O H F W L Q J S 6 H W X S
Page 310 of 661
5-116
Convenience Features
Auto Defogging System
ORG3EV051068
Auto defogging helps reduce the
possibility of fogging up the inside of the
windshield by automatically sensing the
moisture on inside the windshield.
The auto defogging system operates
when the heater or air conditioning is on.
Information
The auto defogging system may not
operate normally, when the outside
temperature is below 14 °F (-10 °C).
When the Auto Defogging
System operates, the indicator
will illuminate.
If a high amount of humidity is detected
in the vehicle, the Auto Defogging
System will be enabled. The following
steps will be performed automatically:
Step 1) Air conditioning will turn ON.
Step 2) Air intake control will change to
Fresh mode.
Step 3) Mode will change to defrost to
direct airflow to the windshield.
Step 4) Fan speed will be set to MAX.
If the air conditioning is off or
recirculation mode is manually selected
while Auto Defogging System is ON, the
Auto Defogging System indicator will
blink 3 times to signal that the manual
operation has been canceled.
Turning the Auto Defogging System
ON or OFF
Climate control system
Press the front windshield defroster
button for 3 seconds when the Start/Stop
button is in the ON position. When the
Auto Defogging System is turned off, the
ADS OFF symbol will blink 3 times and
ADS OFF will be displayed on the climate
control information screen.
When the Auto Defogging System is
turned on, the ADS OFF symbol will blink
6 times without a signal.
Infotainment system
Auto Defogging System can be turned
R Q D Q G R I I E \ V H O H F W L Q J S 6 H W X S
Page 394 of 661
7-2
Driver Assistance System
ORG3EV071083
Forward Collision-Avoidance Assist is
designed to help detect and monitor the
vehicle ahead or help detect a pedestrian
or cyclist in the roadway and warn the
driver that a collision is imminent with
a warning message, an audible warning
and apply emergency braking.
In addition, if equipped with front corner
radars, when driving at high speeds,
Forward Collision-Avoidance Assist helps
detect vehicles in front and adjacent
lanes. If a collision is imminent when
changing lanes, Forward Collision-
Avoidance Assist will apply emergency
braking to help prevent a collision.Junction Turning functionORG3EV071295N
Junction Turning function helps avoid
a collision with an oncoming vehicle in
an adjacent lane when turning left at
a crossroad with the turn signal on by
applying emergency braking.
Junction Crossing function (if
equipped)
ORG3EV071085
Junction Crossing function helps avoid
a collision with oncoming vehicles on
the left or right side when crossing an
intersection by applying emergency
braking.
) 2 5 : $ 5 ' & 2 / / , 6 , 2 1
Page 418 of 661
7-26
Driver Assistance System
Lane Keeping Assist is designed to help
detect lane markings (or road edges)
while driving over a certain speed. Lane
Keeping Assist will warn the driver if the
vehicle leaves the lane without using the
turn signal, or will automatically assist
the driver’s steering to help prevent the
vehicle from departing the lane.
Detecting sensor
ORG3EV071074[1] : Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
(or road edges).
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
For more details on the precautions
R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R
U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
) & $ V V H F W L R Q L Q W K L V F K D S W H U
Lane Keeping Assist Settings
Setting features
ORG3EV071343AU
Lane Safety
With the vehicle on, select or deselect
S ' U L Y H U $ V V L V W D Q F H
Page 429 of 661
7-37
07
Collision warning
[ Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
[ If ‘Warning Only’ is selected from the
Settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
[ To warn the driver of a collision, the
warning light on the side view mirror
and head-up display (if equipped) will
blink. At the same time, an audible
warning will sound and the steering
wheel will vibrate.
[ When the turn signal is turned off or
you move away from the lane, the
collision warning will be canceled and
Blind-Spot Collision-Avoidance Assist
will return to vehicle detection state. WARNING
[ The detecting range of the rear
F R U Q H U U D G D U L V G H W H U P L Q H G E \ D
V W D Q G D U G U R D G Z L G W K W K H U H I R U H R Q
D Q D U U R Z U R D G % O L Q G 6 S R W & R O O L V L R Q
$ Y R L G D Q F H $ V V L V W P D \ G H W H F W R W K H U
Y H K L F O H V W Z R O D Q H V R Y H U D Q G Z D U Q
\ R X , Q F R Q W U D V W R Q D Z L G H U R D G
% O L Q G 6 S R W & R O O L V L R Q $ Y R L G D Q F H
$ V V L V W P D \ Q R W E H D E O H W R G H W H F W D
Y H K L F O H G U L Y L Q J L Q W K H Q H [ W O D Q H D Q G
P D \ Q R W Z D U Q \ R X
[ : K H Q W K H K D ] D U G Z D U Q L Q J I O D V K H U L V
R Q W K H F R O O L V L R Q Z D U Q L Q J E \ W K H W X U Q
V L J Q D O Z L O O Q R W R S H U D W H
Page 471 of 661
7-79
07
„Left side „Right side
ORG3EV071119ORG3EV071120
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help safely change lanes.
Detecting sensor
ORG3EV071036[1], [2]: Surround-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting
sensors.
% O L Q G 6 S R W 9 L H Z 0 R Q L W R U
Settings
Setting features
Blind-Spot View
With the vehicle on, select ‘Driver
$ V V L V W D Q F H
Page 472 of 661
7-80
Driver Assistance System
Blind-Spot View Monitor
Operating conditions
When the left or right side turn signal
turns on, the image in that direction is
displayed on the instrument cluster.
Off conditions
[ When the turn signal turns off, the
image on the instrument cluster will
turn off.
[ When the hazard warning flasher
is on, Blind-Spot View Monitor will
turn off, regardless of the turn signal
status.
[ When other important warning is
displayed on the instrument cluster,
Blind-Spot View Monitor may turn off.
% O L Q G 6 S R W 9 L H Z 0 R Q L W R U
Malfunction
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does
not display properly, have the vehicle
inspected by an authorized retailer of
Genesis Brand products.
WARNING
[ 7 K H L P D J H V K R Z Q R Q W K H F O X V W H U P D \
differ from the actual distance of the
R E M H F W 0 D N H V X U H W R G L U H F W O \ F K H F N
W K H Y H K L F O H
V V X U U R X Q G L Q J V I R U V D I H W \
[ $ O Z D \ V N H H S W K H F D P H U D O H Q V F O H D Q
, I W K H O H Q V L V F R Y H U H G Z L W K I R U H L J Q
P D W H U L D O L W P D \ D G Y H U V H O \ D I I H F W
camera performance and Blind-
6 S R W 9 L H Z 0 R Q L W R U P D \ Q R W R S H U D W H
S U R S H U O \
Page 479 of 661
7-87
07
Overtaking Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left while Smart Cruise Control
is operating, and the following conditions
are satisfied:
[ Your vehicle speed is above 40 mph
(60 km/h)
[ The hazard warning flasher is off
[ A vehicle is detected in front of your
vehicle
[ Deceleration is not needed to
maintain distance with the vehicle in
front
WARNING
[ When the turn signal indicator is
turned on to the left while there is
D Y H K L F O H D K H D G W K H Y H K L F O H P D \
D F F H O H U D W H W H P S R U D U L O \ 3 D \ D W W H Q W L R Q
W R W K H U R D G F R Q G L W L R Q V D W D O O W L P H V
[ 5 H J D U G O H V V R I \ R X U F R X Q W U L H V G U L Y L Q J
G L U H F W L R Q 2 Y H U W D N L Q J $ F F H O H U D W L R Q
Assist will operate when the
F R Q G L W L R Q V D U H V D W L V I L H G : K H Q
using the function in countries with
G L I I H U H Q W G U L Y L Q J G L U H F W L R Q D O Z D \ V
check the road conditions at all
W L P H V
Display and Control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
„Operating „Temporarily canceled
ORG3EV071037NORG3EV071298N
[ When operating
(1) Whether there is a vehicle ahead
and the selected distance level are
displayed.
(2) Set speed
(3) Whether there is a vehicle ahead and
the target vehicle distance
[ When temporarily canceled
(1)
indicator
(2) The previous set speed is shaded.
(3) Whether there is a vehicle ahead (if
equipped)
