2023 FORD RANGER brake light

[x] Cancel search: brake light

Page 175 of 470

FORD RANGER 2023  Owners Manual Four-wheel drive vehicles have advantagesover two-wheel drive vehicles in snow andice but can skid like any other vehicle.Should you start to slide when driving onsnowy or icy roads, turn the steering

Page 179 of 470

FORD RANGER 2023  Owners Manual GENERAL INFORMATION
Note: Occasional brake noise is normal.  Ifa metal-to-metal, continuous grinding orcontinuous squeal sound is present, thebrake linings may be worn-out and anauthorized dealer shou

Page 180 of 470

FORD RANGER 2023  Owners Manual Note: If the system activates, the brakepedal could pulse and may travel further.Maintain pressure on the brake pedal.  Youmay also hear a noise from the system.  Thisis normal.
PARKING BRAKE
WARNING:

Page 182 of 470

FORD RANGER 2023  Owners Manual PRINCIPLE OF OPERATION
The traction control system helps avoiddrive wheel spin and loss of traction.
If your vehicle begins to slide, the systemapplies the brakes to individual wheelsand, when needed,

Page 183 of 470

FORD RANGER 2023  Owners Manual PRINCIPLE OF OPERATION
WARNING: Vehicle modificationsinvolving braking system, aftermarketroof racks, suspension, steering system,tire construction and wheel and tire sizemay change the handling chara

Page 198 of 470

FORD RANGER 2023  Owners Manual The adaptive cruise controls are on thesteering wheel.
Switching Adaptive Cruise ControlOn
Press and release the button.
The indicator, current gap settingand set speed appear in theinformation displa

Page 200 of 470

FORD RANGER 2023  Owners Manual When you press the accelerator pedal, youoverride the set speed and gap distance.
Use the accelerator pedalnormally to intentionally exceedthe set speed limit.
When you override the system, the greeni

Page 202 of 470

FORD RANGER 2023  Owners Manual Optimal system performance requires aclear view of the road by thewindshield-mounted camera.
Optimal performance may not occur if:
•The camera is blocked.
•There is poor visibility or lightingcond