44
In the event of a breakdown
Ensure that the jack is stable. If the
ground is slippery or loose, the jack may
slip or collapse - risk of injury!
Take care to position the jack strictly at
one of the jacking points
A
or B under the
vehicle, ensuring that the head of the jack is
centred under the contact area of the vehicle.
Otherwise, there is a risk of damage to the
vehicle and/or of the jack collapsing - risk of
injury!
► Remove the bolts and store them in a clean
place.
►
Remove the wheel.
Fitting a wheel
► Fit the wheel on the hub.
► Screw in the bolts by hand as far as possible.
►
Pre-tighten the bolts using the wheel wrench
3
only.
► Lower the vehicle again fully .
► Fold jack 1 and remove it.
► Tighten the bolts using the wheel wrench 3
only.
►
Refit the bolt cover (depending on
equipment).
►
Store the tools.
Putting the spare wheel
back in place
► Put the spare wheel back in its housing.
