Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/22/22
368 Vehicle Care
1. Engine Air Cleaner/Filter0375.
2. Engine Oil Fill Cap. See Engine Oil 0370.
3. Engine Oil Dipstick. See Engine Oil 0370.
4. Engine Cooling Fan (Out of View). See Cooling System
0376.
5. Brake Fluid Reservoir. See Brake Fluid 0384.
6. Battery - North America 0385.
7. Engine Coolant Surge Tank and Pressure Cap. See
Cooling System 0376. 8. Positive (+) Battery
Terminal (Under Cover).
See Jump Starting - North
America 0434.
9. Windshield Washer Fluid Reservoir. See Washer
Fluid 0382.
10. Engine Compartment Fuse Block 0392.
11. Remote Negative (-) Battery Terminal. See
Jump Starting - North
America 0434.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/22/22
Vehicle Care 369
3.6L V6 Engine
1. Engine Air Cleaner/Filter 0375.
2. Engine Oil Fill Cap. See Engine Oil 0370.
3. Engine Oil Dipstick. See Engine Oil 0370. 4. Engine Cooling Fan (Out of
View). See Cooling System
0376.
5. Brake Fluid Reservoir. See Brake Fluid 0384. 6. Battery - North America
0385.
7. Engine Coolant Surge Tank and Pressure Cap. See
Cooling System 0376.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/22/22
382 Vehicle Care
3. When it is safe to do so,pull off the road, shift to
P (Park) or N (Neutral), and
let the engine idle.
If the engine coolant
temperature gauge is no
longer in the overheated area
or the engine coolant
temperature warning light no
longer displays, the vehicle
can be driven. Continue to
drive the vehicle slowly for
about 10 minutes. Keep a safe
distance from the vehicle in
front. If the warning does not
come back on, continue to
drive normally and have the
cooling system checked for
proper fill and function.
If the warning continues, pull
over, stop, and park the
vehicle right away.
If there is no sign of steam,
idle the engine for
three minutes while parked.
If the warning is still displayed,
turn off the engine until it
cools down.Washer Fluid
What to Use
When windshield washer fluid
is needed, be sure to read the
manufacturer's instructions
before use. If operating the
vehicle in an area where the
temperature may fall below
freezing, use a fluid that has
sufficient protection against
freezing.
Adding Washer Fluid
The appropriate message will
appear in the Driver
Information Center (DIC) when
the fluid level is low.
Open the cap with the washer
symbol on it. Add washer fluid until the tank is full. See
Engine Compartment
Overview
0367 for reservoir
location.
Caution
.Do not use washer fluid
that contains any type of
water repellent coating.
This can cause the wiper
blades to chatter or skip.
.Do not use engine coolant
(antifreeze) in the
windshield washer. It can
damage the windshield
washer system and paint.
.Do not mix water with
ready-to-use washer fluid.
Water can cause the
solution to freeze and
damage the washer fluid
tank and other parts of
the washer system.
.When using concentrated
washer fluid, follow the
manufacturer instructions
for adding water.
(Continued)
