Page 241 of 308
Page 242 of 308
Minimum tread depth
Distributed over the tire circumference are the
tire manufacturer
Page 243 of 308
Exchanging wheels andtires
Installation Have mounting and wheel balancing carried
out by a dealer
Page 244 of 308
Retreaded tires
Warning
Retreated tires can have different tire casing
structures. With advanced age the service life
can be limited. There is a risk of accident.
The manufacturer of the vehicle does not rec
Page 245 of 308
General information
The wheels consist of tires that are self
Page 246 of 308
Page 247 of 308
NOTICE
The compressor can overheat during ex
Page 248 of 308
Checking and adjusting the tire
inflation pressure
Checking1.Switch off the compressor.2.Read the tire pressure on the tire pressure
display.
To continue the trip, a tire inflation pressure of at least 2 bar must be reached.
Removing and stowing the sealant
bottle
1.Unscrew the filler hose of the sealant bottle
from the tire valve.2.Press the red unlocking device.3.Remove the sealant bottle from the com