Page 75 of 308
After the tailgate is closed, it is locked andmonitored again provided the doors arelocked. The hazard warning system flashes
once.
Panic mode
You can trigger the alarm system if you find yourself in a dangerous situation.
Page 77 of 308
Jam protection system
Principle
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while a window is being closed.
General information If resistance or a blockage is detected while a
window is being closed, the closing action is interrupted.
Safety information
Warning
Accessories on the windows such as anten
Page 79 of 308
Jam protection system
General information If a resistance or blockage is detected while
the glass sunroof is closing, the closing opera
Page 83 of 308
Backrest tilt1.Pull loop to unlock the backrest.2.Apply or lift weight on the backrest as
needed.
After the adjustment, move the backrest
slightly forward or back to engage it correctly.
Seat belts
General information
The vehicle is fitted with five seat belts to en
Page 95 of 308
Child restraint systems with
tether strap
Safety information
Warning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective
effect is reduced. There is a risk of injury.
Make sure that the upper retaining strap
does not run over sharp edges and is not
twisted as it passes the upper anchor.
Warning
If the rear seat backrest is not locked, the
protective effect of the child restraint system
is limited or there is none. In certain situa
Page 96 of 308
Locking the doors and
windows in the rear
Rear doors
Push the locking lever on the rear doors up.
The door can now be opened from the outside only.
Safety switch for the rear Press the button on the driver
Page 114 of 308
not be deactivated and the gearshift request
will not be executed.
A selector lever lock prevents the following in
Page 115 of 308
selector lever automatically returns to the
center position when released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle General informationIn some situations, the vehicle is to roll without
its own power for a short distance, for instance in a car wash, or be pushed.
Engaging selector lever position N:
with a latching selector lever
1.Turn on the ignition.2.If necessary, release the parking brake.3.Depress the brake pedal.4.Touch the selector lever lock and engage selector lever position N.5.Release brake.
The vehicle can roll.
If there is a malfunction, you may not be able
to change the selector lever position.
Manually unlock the transmission lock, if
needed, refer to page 117.
Engaging selector lever position N:
with a tap
