2022 VOLKSWAGEN ID.4 brake

x
Accelerate carefully and gently.
x A
void sudden braking and driving ma-
noeuvres.
x Brake earlier than in normal driving. NOTICE
Rubbing objects on the rear windows can
cause damage, e.g. to the heating wires of
the rear window heating. Luggage compartment
co

ver .
Remo

ving the luggage compartment cover

ant and be designed to cope with the extra
load added by the trailer.
Trailer brake
If the trailer is equipped with its own brake
system, comply with the legal regulations.
Exterior mirrors
If you are unable to see the traffic behind the
trailer in the v
ehicle

Brake fluid specification
V
olkswagen has developed a brake fluid that
has been optimised for the brake system in
the vehicle. To ensure the best possible oper-
ation of the brake system, Volkswagen ex-
pressly recommends the use of brake fluid
compliant with VW standard 501 14.
Before using a particular brake fluid, check
that the specifications printed on the con-
tainer correspond to the vehicle require-
ments.
Brake fluid that is compliant with VW stand-
ard 501 14 is available from Volkswagen
dealerships.
If this brake fluid is not available and it is
necessary to use another high-quality brake
fluid instead, brake fluid that is compliant
with DIN ISO 4925 or US standard
FMVSS 116 DOT 4 CLASS 6 can be used.
Not all brake fluids that are compliant with
DIN ISO 4925 or US standard FMVSS 116
DOT 4 CLASS 6 have the same chemical com-
position. Some of these brake fluids may con-
tain chemicals that can damage or destroy
brake system components over time.
Volkswagen therefore recommends the use
of brake fluid that is compliant with
VW standard 501 14 to ensure sustained op-
timal operation of the brake system.
Brake fluid that is compliant with VW stand-
ard 501 14 fulfils the requirements of
DIN ISO 4925 or US standard
FMVSS 116 DOT 4 CLASS 6.
Brake fluid level
The brake fluid level must always be between
the MIN and MAX markings on the brake fluid
reservoir

x
The refilled brake fluid must be new. NOTICE
Brake fluid that has leaked or been spilt can
damage the v ehicle paintwork, plastic parts
and tyres. Wipe off brake fluid that has
leaked or been spilled immediately from all
parts of the vehicle. Brake fluid can pollute the environ-
ment. Any spilt service fluids must be
cleaned up and disposed of properly. 12-volt vehicle battery
Introduction to the topic
The 12-
volt vehicle battery is a component of
the electrical system and in event of the
high-voltage system failing, supplies the
safety-relevant systems of the vehicle with
energy. In the scope of maintenance work,
the 12-volt vehicle battery is checked and
where required, replaced.
You should only carry out work on the electri-
cal system if you know exactly how to per-
form the required tasks, are aware of the
general safety procedures and have access to
the correct equipment, service fluids and
suitable tools. Failing to carry out work cor-
rectly can cause serious injuries

WARNING
Wheels must have the necessary clearance.
If the wheels do not ha ve the necessary
clearance, the tyre could rub on parts of
the running gear, the vehicle body and the
brake lines. This can lead to a fault in the
brake system and to tread separation and
thus to a tyre bursting.
x The actual tyre size must not exceed the
tyre dimensions of manufacturers ap-
proved by Volkswagen and must not rub
on any vehicle body parts. NOTICE
Avoid heavy impacts and drive round obsta-
cles whene
ver possible. Tyres can be de-
formed in particular by potholes and kerb
edges. This can cause damage to the tyres
and wheel rims. NOTICE
Do not damage the valves when fitting dif-
f
erent tyres. Never drive without valve caps.
This could cause damage to the valves. Old tyres should be disposed of prop-
erly and as required by legislation.
If the spare tyre is not the same as the
tyres that are mounted on the car - f

or
example in the case of winter tyres or a tem-
porary spare wheel - only use the spare tyre
in the event of a breakdown for a short peri-
od of time and drive with extra care. Refit the
normal road wheel as soon as possible.
Volkswagen-approved tyres are guar-
anteed to have the dimensions that are
suitable for the vehicle. In the case of other
tyres, the tyre seller must provide a certifi-
cate from the tyre manufacturer stating that
the tyre is also suitable for the vehicle. This
certificate must be stored in a safe place in
the vehicle. Wheel rims and wheel bolts
Please refer to at the start of the chap-
ter on page 328.
Wheel rims, tyres and wheel bolts are match-
ed to the v

ehicle type. If different wheel rims
are fitted, the correct wheel bolts with the
correct length and correctly shaped bolt
heads must be used. This ensures that the
brakes work properly and that the vehicle
drives quietly and safely.
For technical reasons, it is not generally pos-
sible to use the wheel rims from other vehi-
cles. This can also apply to wheel rims of the
same vehicle type.
The tightening torque of the wheel bolts
must be checked regularly with a properly
functioning torque wrench.

Changing a wheel
Introduction to the topic
You should carry out a wheel change yourself
only when the v
ehicle is parked safely, you
are familiar with the safety procedures and
have access to the correct equipment. Some
models are delivered from the factory with-
out a jack or box spanner. If this is the case,
wheels should be changed by a qualified
workshop.
The jack supplied with the vehicle is only de-
signed for changing a wheel when one vehi-
cle tyre is damaged and has to be replaced. If
both tyres on one side of the vehicle, both
tyres on one axle, or all tyres are damaged,
seek expert assistance. to the P position to reduce the risk of
unintended v

ehicle movement.
x Switch on the electronic parking brake.
x The wheel bolt tightening torque should
be checked with a correctly functioning
torque wrench immediately after chang-
ing a wheel.
x In the case of vehicles with a Tyre Pres-
sure Loss Indicator, the system must be
re-synchronised immediately after
a wheel change

Data from driver assist systems are also re-
corded. In addition to inf
ormation about
whether the systems were switched on or
off, available only to a restricted extent or in-
active, it is also possible to determine wheth-
er these functions steered, accelerated or
braked the vehicle in the above-described sit-
uations. Depending on the vehicle equip-
ment, these systems include the following:

Gross rear axle weight rating
kg1,120
Maximum trailer weight braked, gradients up to 12 % kg 1,000
Maximum trailer weight braked, gradients up to 8 % kg 1,200
Maximum trailer weight unbraked kg750
Maximum permitted gross combination weight kg3,480