2022 TOYOTA YARIS parking sensors

269
4
HV Owner's Manual_Europe_M52N30_en
4-5. Using the driving support systems
Driving
it to automatically be canceled. Then,
the vehicle can be operated by depress- ing the accelerator pedal.
■Re-enabling the Parking Support Brake
To re-enable the Parking Support Brake when it is disabled due to operation of the Parking Support Brake, either
enable the system again ( P.266), or turn the power switch off and then back to ON. Additionally, if the object
becomes no longer in the traveling direction of the vehicle or if the traveling direction of the vehicle changes (such
as changing from moving forward to backing up, or from backing up to mov-ing forward), the system will be re-
enabled automatically.
■If “PKSB Unavailable” is displayed on the multi-information display and the PKSB OFF indicator is on
If the vehicle is stopped due to operation of the Parking Support Brake, the Park-ing Support Brake will be disabled and
the PKSB OFF indicator will illuminate.
●A sensor may be covered with water
drops, ice, snow, dirt, etc. Remove the water drops, ice, snow, dirt, etc., from the sensor to return the system to nor-
mal. Also, due to ice forming on a sensor at low temperatures, a warning message
may be displayed or the sensor may not be able to detect an object. Once the ice melts, the system will return to
normal.
●If this message is displayed, a sensor
on the front or rear bumper may be dirty. Clean the sensors and their sur-rounding area on the bumpers.
●If this message continues to be dis-played even after cleaning the sensor,
or is displayed even though the sen- sor is clean, have the vehicle inspected by any authorized Toyota
retailer or Toyota authorized repairer, or any reliable repairer.
■If a 12-volt battery terminal has
been disconnected and recon- nected
The system needs to be initialized. To
initialize the system, drive the vehicle straight ahead for 5 seconds or more at a speed of approximately 35 km/h (22
mph) or more.

270
HV Owner's Manual_Europe_M52N30_en
4-5. Using the driving support systems
*: If equipped
This function will operate in situations such as the following if an object is
detected in the traveling direction of the vehicle.
■When traveling at a low speed and the brake pedal is not
depressed, or is depressed late
Parking Support Brake function (static objects)*
If the sensors detect a static object, such as a wall, in the traveling
direction of the vehicle and the system determines that a colli sion
may occur due to the vehicle suddenly moving forward due to an
accidental accelerator pedal operation, the vehicle moving the unin-
tended direction due to the wrong shift position being selected, or
while parking or traveling at low speeds, the system will opera te to
lessen the impact with the detected static object and reduce th e
resulting damage.
Examples of function operation

271
4
HV Owner's Manual_Europe_M52N30_en
4-5. Using the driving support systems
Driving
■When the accelerator pedal is depressed excessively
■When the vehicle moves in the unintended direction due to the
wrong shift position being selected
 P. 2 5 3
Types of sensors
WARNING
■To ensure the system can oper- ate properly
 P. 2 5 4
■If the Parking Support Brake function (static objects) oper-
ates unnecessarily, such as at a railroad crossing
 P. 2 6 8
■Notes when washing the vehicle
 P. 2 5 5

272
HV Owner's Manual_Europe_M52N30_en
4-5. Using the driving support systems
■The Parking Support Brake func- tion (static object) will operate
when
The function will operate when the PKSB OFF indicator is not illuminated or
flashing ( P.91, 92) and all of the fol- lowing conditions are met:
●Hybrid system output restriction con-trol• The Parking Support Brake is
enabled. • The vehicle speed is approximately 15 km/h (9 mph) or less.
• There is a static object in the traveling direction of the vehicle and approxi-mately 2 to 4 m (6 to 13 ft.) away.
• The Parking Support Brake deter- mines that a stronger-than-normal brake operation is necessary to avoid
a collision.
●Brake control
• Hybrid system output restriction con- trol is operating.• The Parking Support Brake deter-
mines that an immediate brake opera- tion is necessary to avoid a collision.
■The Parking Support Brake func-tion (static objects) will stop oper-
ating when
The function will stop operating if any of the following conditions are met:
●Hybrid system output restriction con-
trol • The Parking Support Brake is dis-abled.
• The system determines that the colli- sion has become avoidable with nor-mal brake operation.
• The static object is no longer approxi- mately 2 to 4 m (6 to 13 ft.) away from the vehicle or in the traveling direction
of the vehicle.
●Brake control
• The Parking Support Brake is dis- abled.• Approximately 2 seconds have
elapsed since the vehicle was stopped by brake control.• The brake pedal is depressed after
the vehicle is stopped by brake con-
trol. • The static object is no longer approxi-mately 2 to 4 m (6 to 13 ft.) away from
the vehicle or in the traveling direction of the vehicle.
■Re-enabling the Parking Support Brake function (static objects)
 P. 2 6 9
■Detection range of the Parking Sup- port Brake function (static objects)
The detection range of the Parking Sup-
port Brake function (static objects) dif- fers from the detection range of the Toyota parking assist-sensor. ( P.258)
Therefore, even if the Toyota parking assist-sensor detects an object and pro-vides a warning, the Parking Support
Brake function (static objects) may not start operating.
■Objects which the system may not be properly detected
 P. 2 5 6
■Toyota parking assist-sensor buzzer
Regardless of whether the Toyota park-
ing assist-sensor buzzer is enabled or not ( P.254), if the Parking Support Brake function (static objects) is enabled
( P.266), the front or rear sensors detect an object and brake control is performed, the Toyota parking assist-
sensor buzzer will sound to notify the driver of the approximate distance to the object.
■Situations in which the system may
not operate properly
 P. 2 5 6
■Situations in which the system may operate even if there is no possibil-
ity of a collision
 P. 2 5 7

273
4
HV Owner's Manual_Europe_M52N30_en
4-5. Using the driving support systems
Driving
*: If equipped
This function will operate in situations such as the following if a vehicle is
detected in the traveling direction of the vehicle.
■When reversing, a vehicle is approaching and the brake pedal is not
depressed, or is depressed late
 P. 2 4 9
■The Parking Support Brake func- tion (rear-crossing vehicles) will
operate when
The function will operate when the PKSB OFF indicator is not illuminated or
flashing ( P.91, 92) and all of the fol- lowing conditions are met:
●Hybrid system output restriction con-trol• The Parking Support Brake is
Parking Support Brake function (rear-crossing vehi-
cles)*
If a rear radar sensor detects a vehicle approaching from the r ight
or left at the rear of the vehicle and the system determines th at the
possibility of a collision is h igh, this function will perform brake
control to reduce the likelihood of an impact with the approach ing
vehicle.
Examples of function operation
Types of sensors
WARNING
■To ensure the system can oper- ate properly
 P. 2 6 0

582
HV Owner's Manual_Europe_M52N30_en
Alphabetical Index
N
Navigation system-linked display
..................................... 107, 112, 116
O
Odometer ................................ 96, 101
Odometer and trip meter display
Display change button ......... 96, 101
Display items........................ 97, 101
Oil
Engine oil ................................... 423
Opener
Back door ................................... 139
Fuel filler door ............................ 202
Hood .......................................... 322
Outside rear view mirrors
Adjustment ................................. 153
BSM (Blind Spot Monitor) .......... 248
Folding ....................................... 154
Outside rear view mirror defoggers
................................................. 290
RCTA (Rear Crossing Traffic Alert)
................................................. 260
Outside temperature ........ 94, 99, 119
Overheating .................................. 414
P
Panoramic roof shade .................. 309
Parking assist sensors (Toyota park-
ing assist-sensor) ...................... 253
Parking brake ................................ 184
Operation ................................... 184
Parking brake engaged warning
buzzer ...................................... 186
Warning light .............................. 380
Warning message ...................... 186
Parking Support Brake (PKSB) ... 265
Enabling/disabling the Parking Sup-
port Brake ................................ 266
Parking Support Brake function
(rear-crossing vehicles)............273
Parking Support Brake function
(static objects) .......................... 270
Warning lights.............................379
Warning message ...................... 269
PCS (Pre-Collision System) ......... 209
Enabling/disabling the pre-collision
system...................................... 212
Function ..................................... 209
Warning light .............................. 380
Personal lights .............................. 295
Wattage ...................................... 428
PKSB (Parking Support Brake) ... 265
Enabling/disabling the Parking Sup-
port Brake ................................ 266
Parking Support Brake function
(rear-crossing vehicles)............273
Parking Support Brake function
(static objects) .......................... 270
Warning lights.............................379
Warning message ...................... 269
Power control unit .......................... 79
Power control unit coolant .......... 327
Capacity ..................................... 425
Checking .................................... 327
Preparing and checking before win-
ter ............................................. 284
Power mode .................................. 275
Power outlet .................................. 303
Power steering (Electric power
steering system) ......................... 277
Warning light .............................. 377
Power switch ......................... 173, 175
Auto power off function .............. 178
Changing the power switch modes
......................................... 174, 177