
932-1. Instrument cluster
2
Vehicle status information and indicators
■Liquid crystal display
Small spots or light spots may 
appear on the display. This phenom-
enon is characteristi c of liquid crys-
tal displays, and there is no problem 
continuing to use the display.
The multi-information display is 
operated using the meter control 
switches.
Scroll screens
*, change the 
displayed content
* and move 
the cursor
Press: Enter/Set Press and hold: Reset/Dis-
play customizable items
Return to the previous screen
Call sending/receiving and 
history display
Linked with the hands-free system, 
sending or receiving call is dis-
played. For details regarding the 
hands-free system, refer to the 
“NAVIGATION AND MULTIMEDIA 
SYSTEM OWNER’S MANUAL”.
*: On screens where the screen can 
be scrolled and the display can 
be switched, a scroll bar or a 
round icon that shows the num-
ber of registered screens is dis-
played.
■Speedometer display/Driv-
ing range
Speedometer display
Displays the vehicle speed.
Driving range
Displays driving ra nge with remain-
ing fuel. Use the displayed values 
as a reference only.
This distance is computed based 
on your average fuel consumption. 
WARNING
■Caution for use while driving
●When operating the multi-infor-
mation display while driving, 
pay extra attention to the safety 
of the area aroun d the vehicle.
●Do not look continuously at the 
multi-information display while 
driving as you may fail to see 
pedestrians, objects on the 
road, etc. ahead o f the vehicle.
■The information display at 
low temperatures
 P. 9 1
Changing the meter dis-
play
Driving information dis-
play ( ) 

942-1. Instrument cluster
As a result, the actual distance that 
can be driven may differ from that 
displayed.
When only a small amount of fuel is 
added to the tank, the display may 
not be updated.
When refueling, turn the power 
switch off. If the vehicle is refueled 
without turning the power switch off, 
the display may not be updated.
When “Refuel” is displayed, the 
remaining fuel amount is low and 
the distance that can be driven with 
the remaining fuel cannot be calcu-
lated.
Refuel immediately.
■Fuel economy
Use the displayed values as a ref-
erence only.
Driving range
Displays driving range with remain-
ing fuel.
This distance is  computed based 
on your average fuel consumption. 
As a result, the actual distance that 
can be driven may differ from that 
displayed.
When only a small amount of fuel is 
added to the tank, the display may 
not be updated.
When refueling, turn the power 
switch off. If the vehicle is refueled 
without turning the power switch off,  the display may not be updated.
When “Refuel” is displayed, the 
remaining fuel amount is low and 
the distance that can be driven with 
the remaining fuel cannot be calcu-
lated.
Refuel immediately.
Current fuel economy
Displays the instantaneous current 
fuel Economy.
Average fuel economy
Displays the average fuel economy 
since the function
 was reset or the 
average fuel economy after starting 
or refueling.
*1, 2, 3
The average fuel economy dis-
play can be changed in  . 
( P.97)
*1: Use the displayed fuel consump-
tion as a reference only.
*2: Average fuel economy since the function was res et can be reset 
by pressing and holding  .
*3: Average fuel economy after  starting is reset each time the 
engine stops.
■ECO Accelerator Guid-
ance/Eco score
Displays a reference operation 
range for using the accelerator 
pedal according to driving condi-
tions, and a score result that 
evaluates the current driving 
status. 

1002-1. Instrument cluster
Select to change the units of mea-
sure displayed.
  EV indicator ( P.217)
Select to enable/disable the EV 
indicator.
Select to change the displayed con-
tent of the following:
• Hybrid system indicator
Select to display/not display the 
Eco Accelerator Guidance. ( P. 9 0 )
• Fuel economy display
Select to change the average fuel 
consumption display between after 
start/after reset. ( P. 9 4 )
Select to display/not display the 
audio system linked display.
Select to change the displayed con-
tent of the following:
• Display contents
Select to display/not display the 
AWD control (if equipped) and 
energy monitor. ( P. 9 7 ,   1 1 7 )
• Drive information type
Select to change the drive informa-
tion type display between after 
start/after reset.
• Drive information items
Select to set the first and second 
items of the drive information dis-
play to any of the following: aver-
age vehicle 
speed/distance/elapsed time.
 Trip Summary
Select to turn the display of a trip 
summary display.
Pop-up display
Select to enable/disable pop-up 
displays for each relevant system.
Multi-information display off
Displays a blank screen.
Default setting
Select to reset the meter display 
settings to the default setting.
■Vehicle functions and set-
tings that can be changed
 P.528
■Suspension of the settings dis-
play
●Some settings cannot be changed 
while driving. When changing set-
tings, park the vehicle in a safe 
place.
●If a warning message is displayed, 
operation of the settings display 
will be suspended.
■Pop-up displays
Depending on the pop-up display, 
the currently displayed item in the 
message display area may be tem-
porarily not displayed. The item will 
be displayed after the pop-up dis-
play is no longer displayed. 

1032-1. Instrument cluster
2
Vehicle status information and indicators
Press and hold: Reset/Dis-
play customizable items
Return to the previous screen
Call sending/receiving and 
history display
Linked with the hands-free system, 
sending or receiving call is dis-
played. For details  regarding the 
hands-free system, refer to the 
“NAVIGATION AND MULTIMEDIA 
SYSTEM OWNER’S MANUAL”.
*: On screens where the screen can  be scrolled and the display can 
be switched, a scroll bar or a 
round icon that shows the num-
ber of registered screens is dis-
played.
■Fuel economy
Use the displayed values as a ref-
erence only.
Current fuel consumption
Displays the instantaneous current 
fuel consumption.
Average fuel economy (after 
start)
Displays the average fuel con-
sumption since hybrid system  start.
*1
Driving range
Displays the driving range with 
remaining fuel.
This distance is computed based 
on your average f
uel consumption. 
As a result, the actual distance that 
can be driven may differ from that 
displayed.
When only a small amount of fuel is 
added to the tank, the display may 
not be updated.
When refueling, turn the power 
switch off. If the ve hicle is refueled 
without turning the power switch off, 
the display may not be updated.
When “Refuel” is displayed, the 
remaining fuel amount is low and 
the distance that can be driven with 
the remaining fuel cannot be calcu-
lated.
Refuel immediately.
Gadget*2
The following items can be dis-
played by changing the settings for 
gadget content and fuel economy 
type on  . ( P.107)
•Other
Blank: No item
• Average vehicle speed
After start: Displ ays average vehi-
cle speed since hybrid system start
After reset: Displays average vehi-
cle speed since the display was 
reset
*3
• Distance
After start: Displays the distance 
driven since vehicle start.
After reset: Displays the distance 
driven since the display was reset
*3
Driving information dis-
play ( ) 

1052-1. Instrument cluster
2
Vehicle status information and indicators
Displayed as a blue bar, and rep-
resents an estimated suitable 
accelerator pedal operation range 
for the current driving conditions, 
such as starting off or cruising.
This display changes according to 
situation, such as when starting off 
or cruising.
Eco score
The following 3 E co driving meth-
ods are evaluated in 5 levels: 
Smooth start-off acceleration, driv-
ing without sudden acceleration, 
and smooth stopping. When the 
vehicle is stopped , an Eco score 
out of 100 po ints will be displayed.
Eco start status
Eco cruise status
Eco stop status
Score result
How to read the bar display
Not yet evaluated Low
High
• After the hybrid system is started, 
the Eco score will not be dis-
played until the vehicle speed 
exceeds approximately 12 mph 
(20 km/h).
• The Eco score  will be reset each 
time the hybrid system is started.
• When the hybrid system is  stopped, the total score of the 
current trip will  be displayed.
■Speedometer display (digi-
tal speed)/Driving range
 Speedometer display (digital 
speed)
P. 1 1 0
 Driving range
Displays driving ra nge with remain-
ing fuel. Use the displayed values 
as a reference only.
This distance is computed based 
on your average f uel consumption. 
As a result, the actual distance that 
can be driven may differ from that 
displayed.
When only a small amount of fuel is 
added to the tank, the display may 
not be updated.
When refueling, turn the power 
switch off. If the ve hicle is refueled 
without turning the power switch off, 
the display may not be updated.
When “Refuel” is displayed, the 
remaining fuel amount is low and 
the distance that can be driven with 
the remaining fuel cannot be calcu-
lated.
Refuel immediately. 

1102-1. Instrument cluster
Select to enable/disable the rear 
seat reminder.
“Scheduled Maintenance” 
( P.405)
Select to reset the scheduled main-
tenance information (maintenance 
required message and distance 
until maintenance necessary) after 
all maintenance is performed.
■ Meter settings
Press and hold   to change 
the settings of the following 
items:
 Language
Select to change  the language dis-
played.
 Units
Select to change t he units of mea-
sure displayed.
  EV indicator ( P.217)
Select to enable/disable the EV 
indicator.
Speedometer display (digital 
speed)
Select to enable/disable the speed-
ometer display.
Gadget content
Select to turn the display of a gad-
get.
Fuel economy type
Select to change the average fuel 
consumption display and an item to 
be displayed as gadget.
Pop-up display
Select to enable/disable pop-up 
displays for each relevant system.
Multi-information display off
Displays a blank screen.
Default setting
Select to reset the meter display 
settings to the default setting.
■Vehicle functions and set-
tings that can be changed
 P.528
■Background color of the indica-
tor/shift position display area
The background color of the indica-
tor/shift position display area is 
changed accordi ng to the driving 
mode as follows ( P.319):
●Eco drive mode: Blue
●Sport mode: Red
■Suspension of the settings dis-
play
●Some settings cannot be changed 
while driving. When changing set-
tings, park the vehicle in a safe 
place.
●If a warning message is displayed, 
operation of the settings display 
will be suspended.
■Pop-up displays
Depending on the pop-up display, 
the currently displayed item in the 
message display area may be tem-
porarily not displayed. The item will 
be displayed after the pop-up dis-
play is no longer displayed. 

1242-1. Instrument cluster
These images are examples only, and may vary slightly from actual condi-
tions.
Hybrid battery (traction bat-
tery) status (Example: 7-inch 
display)
Low
High
These images are examples only, 
and may vary slightly from actual 
conditions.
■Trip information
Audio or Audio Plus (vehicles 
without Data Communication 
Module)
1 Press the “MENU” button.
2 Select “Info” on the “Menu” 
screen.
If a screen other than “Trip Informa-
tion” is displayed, select “Trip Infor-
mation”.
Audio Plus (vehicles with 
Data Communication Mod-
ule) or Premium Audio
1 Press the “MENU” button.
2 Select “Info” on the “Menu” 
screen. 3
Select “ECO” on the “Infor-
mation” screen.
If a screen other than “Trip Informa-
tion” is displayed, select “Trip Infor-
mation”.
12.3-inch display
1 Select   Toyota multi-oper-
ation touch ( P.338).
2 Select “TripInfo.”.
The screen posit ion can also be 
changed by select  a desired infor-
mation in full screen.
Resetting the consumption 
data
Fuel consumption in the past 
15 minutes
Current fuel consumption
Regenerated energy in the 
past 15 minutes
One symbol indicates 50 Wh. Up to 
5 symbols are shown.
Average vehicle speed since 
the hybrid system was 
started.
Elapsed time since the hybrid 
system was started.
Cruising range
Consumption 

1252-1. Instrument cluster
2
Vehicle status information and indicators
The average fuel consumption 
history is divided by color into 
past averages and the average 
fuel consumption since the last 
updated. Use the displayed 
average fuel consumption as a 
reference.
The image is an example only, and 
may vary slightly from actual condi-
tions.
■History
Audio or Audio Plus (vehicles 
without Data Communication 
Module)
1 Press the “MENU” button.
2 Select “Info” on the “Menu” 
screen.
If a screen other than “History” is 
displayed, select “History”.
Audio Plus (vehicles with 
Data Communication Mod-
ule) or Premium Audio
1 Press the “MENU” button.
2 Select “Info” on the “Menu” 
screen.
3 Select “ECO” on the “Infor-
mation” screen.
If a screen other than “History” is 
displayed, select “History”.
12.3-inch display
1 Select   Toyota multi-oper-
ation touch ( P.338).
2 Select “History”.
The screen position can also be 
changed by select a desired infor-
mation in full screen.
Best recorded fuel consump-
tion
Latest fuel consumption
Previous fuel consumption 
record
Resetting the history data
Updating the latest fuel con-
sumption data
The average fuel consumption 
history is divided by color into 
past averages and the average 
fuel consumption since the last 
updated. Use the displayed 
average fuel consumption as a 
reference.
The image is an example only, and 
may vary slightly from actual condi-
tions.
■Updating the history data
Update the latest fuel consumption 
by selecting “Update” to measure 
the current fuel consumption again.
■Resetting the data
The fuel consumption data can be 
deleted by selecting “Clear”.
■Cruising range
Displays the estimated maximum 
distance that can be driven with the 
quantity of fuel remaining.
This distance is computed based on