Page 38 of 758
361-1. For safe use
WA R N I N G
■Seat belt pretensioners 
If the pretensioner has activated, the  
SRS warning light will come on. In  that case, the seat belt cannot be  
used again and must be replaced at 
any authorized Toyota retailer or  Toyota authorized repairer, or any reli- 
able repairer. 
     
        
        Page 40 of 758
381-1. For safe use 
Can help protect primarily the head of occupants in the outer seats
■SRS airbag system components 
Seat belt pretensioners and force limiters 
Side impact sensors (front)
Airbag manual on-off switch 
Front passenger airbag 
Side airbags
Curtain shield airbags
Side impact sensors (rear)
SRS warning light 
Side impact sensors (front door) 
Driver airbag
Driver’s knee airbag
“AIR BAG ON” and “AIR BAG OFF” indicator lights 
Front impact sensors 
Airbag sensor assembly 
The main SRS airbag system components are shown above. The SRS  
airbag system is controlled by the airbag sensor assembly. As the airbags 
deploy, a chemical reaction  in the inflators quickly fills the airbags with  
non-toxic gas to help restrain the motion of the occupants.
■If the SRS airbags deploy (inflate)●Slight abrasions, burns, bruising etc.,  
     
        
        Page 85 of 758
2
83
2
Vehicle status information and indicators
Vehicle status information 
and indicators
.2-1. Instrument cluster 
Warning lights and indicators 
......................................... 84 
Gauges and meters (4.2-inch  
display) ............................. 89 
Gauges and meters (7-inch  
display) ............................. 93 
Multi-information display ..... 99 
Head-up display................ 106 
Fuel consumption information 
....................................... 110 
     
        
        Page 86 of 758
842-1. Instrument cluster
2-1.Instrument cluster
For the purpose of explanation, the following illustrations display all warning  
lights and indicators illuminated.
4.2-inch display
7-inch display (when analog speedometer is displayed)
War ning lights and indicators
The warning lights and indicators on the instrument cluster, center 
panel and outside rear view mirrors inform the driver of the status of 
the vehicle’s various systems.
Warning lights and indicators displayed on the instrument  
cluster 
     
        
        Page 87 of 758
85
2 
2-1. Instrument cluster
Vehicle status information and indicators
7-inch display (when digital speedometer is displayed)
7-inch display (when digital+ speedometer is displayed) (if equipped) 
Warning lights inform  the driver of  
malfunctions in the indicated vehi-
cle’s systems. 
Warning lights
(Red) 
Brake system warning light*1  
( P. 5 1 1 ) 
(Yellow) 
Brake system warning light*1  
( P. 5 1 1 )
High coolant temperature  
warning light*2 ( P.511) 
Charging system warning  
light*1 ( P.512) 
Low engine oil pressure  
warning light*2 ( P.512) 
Malfunction indicator lamp*1  
( P.512) 
SRS warning light*1  
( P.512) 
     
        
        Page 88 of 758

862-1. Instrument cluster
*1: These lights come on when the  
engine switch is turned to ON to indi-
cate that a system check is being 
performed. They will turn off after the 
engine is started, or after a few sec-
onds. There may be a malfunction in 
a system if the lights do not come 
on, or turn off. Have the vehicle 
inspected by any authorized Toyota 
retailer or Toyota authorized repairer, 
or any reliable repairer.
*2: This light illuminates on the 
multi-information display. 
ABS warning light*1  
( P.513) 
Brake Override System  
warning light/Drive-Start  
Control warning light*2  
( P.513) 
(Red) 
Electric power steering sys- 
tem warning light*1 ( P.514) 
(Yellow) 
Electric power steering sys- 
tem warning light*1 ( P.514) 
Low fuel level warning light  
( P.514) 
Driver’s and front passen- 
ger’s seat belt reminder light 
( P.514) 
Rear passengers’ seat  
belt reminder lights  
( P.514) 
Tire pressure warning light*1  
(if equipped) ( P.515) 
(Orange) 
LTA indicator (if equipped)  
( P.515) 
LDA indicator (if equipped)  
( P.515) 
(Flashes) 
Stop & Start cancel indica- 
tor*1 (if equipped) ( P.515) 
(Flashes) 
Toyota parking assist-sensor  
OFF indicator*1 (if equipped)  
( P.516) 
(Flashes) 
RCTA OFF indicator*1 (if  
equipped) ( P.517) 
(Flashes) 
PKSB OFF indicator*1 (if  
equipped) ( P.516)
(Flashes  or illumi-nates) 
PCS warning light*1 (if  
equipped) ( P.517) 
Slip indicator*1 ( P.517) 
(Flashes) 
Parking brake indicator  
( P.517) 
(Flashes) 
Brake hold operated indica- 
tor*1 ( P.518) 
(Orange) 
iMT indicator*1 (if equipped)  
( P.518)
WA R N I N G
■If a safety system warning light  
does not come on 
Should a safety syst em light such as  the ABS and SRS warning light not  
come on when you start the engine, 
this could mean that these systems  are not available to help protect you in  
an accident, which could result in 
death or serious injury. Have the vehi-
cle inspected by any authorized  Toyota retailer or Toyota authorized  
repairer, or any reliable repairer 
immediately if this occurs. 
     
        
        Page 89 of 758

87
2 
2-1. Instrument cluster
Vehicle status information and indicators
The indicators inform the driver of  
the operating state of the vehicle’s 
various systems.
Indicators
Turn signal indicator  
( P.189) 
Tail light indicator ( P.195) 
Headlight high beam indica- 
tor ( P.196) 
Adaptive High-beam System  
indicator (if equipped) 
( P.202) 
Automatic High Beam indica- 
tor (if equipped) ( P.199) 
Front fog light indicator (if  
equipped) ( P.205) 
Rear fog light indicator  
( P.205) 
PCS warning light*1, 2 (if  
equipped) ( P.226) 
Cruise control indicator (if  
equipped) ( P.249, 260,  
271) 
Dynamic radar cruise control  
indicator (if equipped) 
( P.249, 260) 
Cruise control “SET” indica- 
tor (if equipped) ( P.249,  
260, 271)
*3
LTA indicator (if equipped) 
( P.236) 
LDA indicator (if equipped)  
( P.245) 
BSM outside rear view mirror  
indicators*4, 5, 6 (if equipped)  
( P.288) 
BSM indicator (if equipped)  
( P.288)
Toyota parking assist-sensor  
OFF indicator*1, 2 (if  
equipped) ( P.304) 
RCTA OFF indicator*1, 2 (if  
equipped) ( P.312) 
PKSB OFF indicator*1, 2 (if  
equipped) ( P.318) 
Speed limiter indicator (if  
equipped) ( P.273) 
S-IPA indicator*1 (if  
equipped) ( P.331) 
Stop & Start indicator*1 (if  
equipped) ( P.280) 
Stop & Start cancel indica- 
tor*1, 2 (if equipped)  
( P.280) 
(Flashes) 
Slip indicator*1 ( P.358) 
VSC OFF indicator*1, 2  
( P.358) 
Smart entry & start system  
indicator*7 (if equipped)  
( P.178) 
Gear Shift Indicator (if  
equipped) ( P.102) 
Parking brake indicator  
( P.189) 
Brake hold standby indica- 
tor*1 ( P.192) 
Brake hold operated indica- 
tor*1 ( P.192) 
Auto EPB OFF indicator*1, 2  
(if equipped) ( P.189) 
Eco Driving Indicator  
Light*1(if equipped) ( P.102) 
Low outside temperature  
indicator*8 ( P.89, 93) 
Security indicator ( P. 7 9 ,   
81) 
     
        
        Page 93 of 758

91
2 
2-1. Instrument cluster
Vehicle status information and indicators
panel lights can be adjusted sepa- 
rately for when the tail lights are on  
and off. 
• To adjust the brightness, display the  
instrument panel light control display  
and press and hold the display  
change button.
 Distance until next engine oil  
change
Displays the distance the vehicle can  
be driven until an oil change is neces-
sary. 
The distance until the next engine oil  
change will also be displayed in the fol-
lowing situations: 
• When the engine switch is turned to  
ON. 
• When a warning message indicating  
that oil maintenance should be per- 
formed soon or is required is dis- 
played. 
• Resetting:  P. 4 7 4
■Adjusting the minute to “00” 
1 Press   or   to select   of  
the multi-information display. 
2 Press   or   to select “Clock  
: 00”. 
Press the   to set the clock to  
the beginning of the nearest hour.
e.g. 
1:00 to 1:29   1:00 
1:30 to 1:59   2:00
■Changing the clock 
1 Press   or   to select   of  
the multi-information display. 
2 Press   or   to select “Clock  
: 00”. 
3 Press and hold the  . 
4 Press  or  to select an  
item to be changed. 
5 Press  or  to change the  
setting. 
The following can be changed: 
 12-hour/24-hour format 
 Hour 
 Minute
■Clock adjustment 
The clocks on the following can be  
adjusted on the audio system 
screen. 
 Multi-information display 
 Audio system screen
■Setting the clock to be  
adjusted automatically by GPS 
1 Press the “MENU” button. 
2 Select “Setup” on the “Menu”  
screen. 
3 Select “General” on the “Setup”  
screen. 
4 Select “Clock”.
Adjusting the clock (vehi- 
cles without navigation/mul- 
timedia system)
Adjusting the clock (vehi-
cles with navigation/multi-
media system)