Page 163 of 818
1612. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10720E
The indicators inform the driver of the operating state of the vehicle’s 
various systems.
Indicators
IndicatorsPages 
Turn signal indicator P. 324
Tail light indicator P. 333
Headlight high beam indicator P. 334
“READY” indicator P. 305
Front fog light indicator (if equipped) P. 343
Rear fog light indicator P. 343
Automatic High Beam indi cator (if equipped) P. 339
Parking brake indicator P. 325 
     
        
        Page 164 of 818

1622. Instrument cluster
C-HR_HV_OM_Europe_OM10720E
*1: These  lights  turn  on when  the  power  switch is  turned to  ON  mode to  indi- 
cate  that  a  system  check  is  being  performed.  They  will  turn  off   after  the 
hybrid system is on, or after a few seconds. There may be a mal function in 
a  system  if  a  light  does  not  come  on,  or  if  the  lights  do  not  t urn  off.  Have 
the  vehicle  inspected  by  any  authorized  Toyota  retailer  or  Toyo ta  autho- 
rized repairer, or any reliable repairer.
*2: The light turns on when the system is off.
*3: The light flashes to indicate that the system is operating.
*1, 2Toyota parking assist-sensor OFF indicator  
(if equipped) P.   4 5 7
*1, 2PKSB OFF indicator (if equipped) P. 478
S-IPA indicator (if equipped) P. 494
*1, 2BSM OFF indicator (if equipped) P. 437
*1BSM outside rear view mirror indicator  
(on the outside rear vie w mirrors) (if equipped) 
P. 437,  
469
*2“RCTA OFF” indicator (if equipped) P. 469
Security indicator (on the center panel) P. 130,  
147
*1, 3Slip indicator light P. 534
*1, 2VSC off indicator P. 535
*1, 2PCS warning light (if equipped) P. 369
*1“PASSENGER  AIR  BAG”  indicator  (on  the 
center panel) (if equipped) P. 55
IndicatorsPages 
     
        
        Page 165 of 818
1632. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10720E
Indicators  and  symbols  displayed  on  the  multi-information  dis- 
play
IndicatorsPages
*1, 2, 3
Brake hold operated indicator P. 330,  
685
*1
Brake hold standby indicator P. 330
*4
LTA indicator (if equipped) P. 387,  
684 
Speed limiter indicator (if equipped) P. 434 
Cruise control indicator P. 410,  
427 
Cruise control “SET” indicator P. 410,  
427 
Radar cruise control indicator (if equipped) P. 410 
“SPORT” indicator P. 432 
 “ECO MODE” indicator P. 432 
     
        
        Page 166 of 818
1642. Instrument cluster
C-HR_HV_OM_Europe_OM10720E
*1: These  lights  turn  on when  the  power  switch is  turned to  ON  mode to  indi- 
cate  that  a  system  check  is  being  performed.  They  will  turn  off   after  the 
hybrid system is on, or after a few seconds. There may be a mal function in 
a  system  if  a  light  does  not  come  on,  or  if  the  lights  do  not  t urn  off.  Have 
the  vehicle  inspected  by  any  authorized  Toyota  retailer  or  Toyo ta  autho- 
rized repairer, or any reliable repairer.
*2: The light turns on to indicate that the system is operating.
*3: The light flashes to indicate a malfunction.
*4: Depending  on  the  operating  condition,  the  color  and  illuminati ng/flashing 
state of the light change. 
EV Indicator P. 120 
EV drive mode indicator P. 312 
Low outside temperature indicator P. 166
IndicatorsPages 
     
        
        Page 167 of 818
1652. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10720E
Symbols on multi-information displayPages 
Charging system warning light P. 681 
Low engine oil pressure warning light P. 681 
High engine coolant temperature warning light P. 686 
Smart entry & start system P. 305
Hybrid system overheat warning light P. 759 
Brake Override System/Drive-Start Control P. 687
WARNING
■ If a safety system warning light does not come on 
Should a safety system light such as ABS and SRS airbag warning  light not 
come on when you start the hybrid system, this could mean that  these sys- 
tems are not available to help protect you in an accident, whic h could result 
in  death  or  serious  injury.  Have  the  vehicle  inspected  by  any  a uthorized 
Toyota retailer or Toyota authorized repairer, or any reliable  repairer. 
     
        
        Page 168 of 818
1662. Instrument cluster
C-HR_HV_OM_Europe_OM10720E
Gauges and meters
The units used on the speedometer may differ  depending on the tar- 
get region. 
Hybrid System Indicator
Displays hybrid system output or regeneration level.
Multi-information display
Presents the driver with a variety of driving-related data. ( P. 170) 
Displays warning messages in case of a malfunction. ( P. 692)
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Outside temperature display
Displays the outside temperature within the range of -40°C (-40°F) to 50°C 
(122°F).  Low  outside  temperature  indicator  comes  on  when  the  am bient 
temperature is 3°C (37°F) or lower. 
     
        
        Page 169 of 818
1672. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10720E
Odometer and trip meter display: 
Displays the following items.
Odometer: 
Displays the total distance the vehicle has been driven. 
Trip meter: 
Displays the distance the vehicle has been driven since the met er was last 
reset. Trip meters A and B can be used to record and display di fferent dis- 
tances independently.
Shift position and shift range display
Displays the selected shift position or selected shift range. ( P. 315, 319)
Engine coolant temperature gauge
Displays the engine coolant temperature.
Switches the items of the odome- 
ter  and  trip  meter  display  by 
pressing the “TRIP” switch.
When  the  trip  meter  is  displayed, 
pressing  and  holding  the  “TRIP” 
switch will reset the trip meter.
Changing the display 
     
        
        Page 170 of 818

1682. Instrument cluster
C-HR_HV_OM_Europe_OM10720E
■The meters and display illuminate when 
The power switch is turned to ON mode. 
■ Hybrid System Indicator 
Eco area  
Shows that the vehicle is being  driven in an Eco-friendly manner. 
Power area  
Shows  that  an  Eco-friendly  driving  range  is  being  exceeded  (dur ing  full 
power driving, etc.) 
● In the following situation, the Hybrid System Indicator does not operate. 
• “READY” indicator is not illuminated. 
• The shift position is in a range P, R or N. 
● By  keeping  the  indicator  needle  within  Eco  area,  more  Eco-friendly  driving 
can be achieved. 
● Charge  area  indicates  regeneration*  status.  Regenerated  energy  will  be 
used to charge the hybrid battery (traction battery).
*: When  used  in  this  manual,  “regeneration”  refers  to  the  conver sion  of 
energy created by the movement of the vehicle into electrical e nergy. 
Charge area  
Shows  that  energy  is  being  recovered
via the regenerative brake. 
Hybrid Eco area  
Shows  that  gasoline  engine  power  is 
not being used very often. 
The  gasoline  engine  will  automatically 
stop  and  restart  under  various  condi- 
tions.