Page 38 of 186
Seats, steering wheel and mirrorFront seat - with manual operation Controls on the seat
Version 1
AAdjusting the seat in the longitudinal direction -
after releasing the operating lever, the lock must
audibly click into placeBAdjusting the heightCAdjusting the angle of the backrest - do not lean
against the backrest during adjustmentDAdjusting the lumbar support: Extent of the cur-
vature
Version 2
AAdjusting the seat in the longitudinal direction -
after releasing the operating lever, the lock must
audibly click into placeBAdjusting the inclination of the seatCAdjusting the lumbar support: Position of the
curvatureDAdjusting the lumbar support: Extent of the cur-
vatureEAdjusting the heightFAdjusting the angle of the backrest - do not lean
against the backrest during adjustmentAfter a certain time, play can develop within the ad-
justment mechanism of the backrest angle.
Set the length of the seat manually
Page 39 of 186
Set the length of the seat manually
Page 168 of 186
Technical data
Tow hitch attachment points
ADistance of the attachment pointsBLength of the rear overhang to the centre of the
ball headCDistance of the front attachment point to the
centre of the ball headDDistance of the rear attachment point to the
centre of the ball headEDistance of the rear bumper to the centre of the
ball head (according to the ECE-55 standard)FDistance from the centre of the ball head to the
road (according to the standard ECE-55)GFastening points on the bodyIn mmA1040B1185.5C587.3D367.3Emin. 65F350-420
Maximum vertical load for trailer operation
The maximum vertical load for trailer operation de-
pends on the engine type and the vehicle equipment.
The valid specification for your vehicle can be found
in the technical vehicle documentation, (e.g. vehicle
approval documentation, the COC document) or at a
