2022 SKODA KAROQ display

"Screen off" mode
With the ignition on and functions Switch off screen (in 10 seconds)
and
Display clockwhen screen is off

Operation principleFig. 176
Example of screen display
In the voice control main menu

Voice commands can be used during voice controlVoice commandOperation“Back ”Return to the previous menu“Help ”reproducing and displaying possible voice com-
mands
Voice commands that can be used while browsing the list entries
Voice commandOperation“ Next page ”
Browse menu / list / directory
“Previous page ”“First page ”“Last page ”
Additional Information
Navigation - applies to Infotainment Columbus
If the set Infotainment language matches the language of currently selected country when entering the destination, then the destination address can be
entered in one step .
The voice command “ Navigate” can be issued and straight away, the city,
street and street number (if it is included in the navigation data) Interest (POI)
or a contact with the previously stored address.
Navigation - applies to Infotainment Amundsen
To the destination, you are first required to issue the command “enter ad-
dress” and then follow Infotainment instructions.
It is not necessary to spell city and street names if the entered destination is located in a country that has no voice control available for the language.
Online POI search

vCall settings: - Setting the phone functions of the SIM card inserted in the ex-
ternal module during a call (applies to Infotainment Columbus with the SIM
card slot in the external module)

vHold call:
- Switch on/off the display of the option for answering an incoming
call during a call, determining the current divert setting
v
On
- Turn on the display

v
Off
- Turn off the display

v
Request status
- Checking the settings of the SIM card function

v
Send own number:
- Sets the telephone number display for the call receiver

v
On
- Turn on the display

v
Off
- Turn off the display

v
Network dependent
- Telephone service provider dependent display

v
Request status
- Checking the settings of the SIM card function

v
Delete calls
- Delete the selected call type performed via the SIM card inserted
into the external module or via a telephone connected to Infotainment by the
Bluetooth

vIf the CD/DVD is physically damaged, is not readable or is inserted incorrect-
ly the following message is displayed Error: CD/DVD
.
v
It is possible that CD/DVDs protected by copyright cannot be played back at
all or only in certain circumstances.
SD card
Fig. 184
Columbus, Amundsen, Bolero:
Insert SD card
Fig. 185
Swing: Insert the SD card
Pushing in

Control viewed imagesOperationAction
Display of the next image
Finger motion across the screen to the left(with initial representation)Tap 
Display the previous image
Finger motion across the screen to the right
(with starting representation)Tap 
Increase the image size
Touch screen using two fingers and pull apartTurning the knob

Contact list
After the list has been opened the following functions can be executed.
Insert a contact in the recipient list
Enter the telephone number
Return to view the message
Tap on the Find
function surface to open a list of available telephone contacts.
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen.
Recipient list
The following functions can be executed by tapping on one of the functional
surfaces.
Display contact list with the option of adding/removing additional re-
cipients (tap on the function surface to return to the recipient list x .
Removal of the contact from the recipient list
Sending the message
Return to view the message
Received text message
When you receive a new message, the number of new messages received is
displayed within the function surface  and at the same time the symbol
 .

If your data provider is not available in the list, ask your provider whether one
of the displayed providers can be used.
The parameters of the telephone service provider network can be set in the menu item 