2022 NISSAN PATHFINDER coolant temperature

[x] Cancel search: coolant temperature

Page 108 of 647

NISSAN PATHFINDER 2022  Owner´s Manual 2 Instruments and controls
Instrument panel................................2-4
Meters and gauges .............................2-6
Speedometer and odometer .................2-6
Tachometer .............

Page 113 of 647

NISSAN PATHFINDER 2022  Owner´s Manual 1. Tachometer
2. Warning and indicator lights
3. Vehicle information displayOdometer
Twin trip odometer 4. Speedometer
5. Fuel gauge
6. Engine coolant temperature gauge
SPEEDOMETER AND ODOMETER
This v

Page 116 of 647

NISSAN PATHFINDER 2022  Owner´s Manual ENGINE COOLANT TEMPERATURE
GAUGE
The gauge indicates the engine coolant
temperature. The engine coolant tempera-
ture is within the normal range
O1when
the gauge needle points within the zone
shown in

Page 157 of 647

NISSAN PATHFINDER 2022  Owner´s Manual 13. Traffic Sign Recognition (if so
equipped)
The Traffic Sign Recognition (TSR) system
provides the driver with information about
the most recently detected speed limit.
For additional information, s

Page 305 of 647

NISSAN PATHFINDER 2022  Owner´s Manual OPERATING TIPS
The sunload sensor, located on the top
driver's side of the instrument panel, helps
the system maintain a constant tempera-
ture. Do not put anything on or around this
sensor.• Wh

Page 500 of 647

NISSAN PATHFINDER 2022  Owner´s Manual • If the sonar sensors are dirty, wipe themoff with a sof t cloth while being careful to
not damage them.
• The sonar sensors may be blocked by temporary ambient conditions such as
splashing water

Page 505 of 647

NISSAN PATHFINDER 2022  Owner´s Manual • When the Idling Stop System is deacti-vated af ter the engine has been auto-
matically stopped by the Idling Stop Sys-
tem, the engine will immediately restart if
suitable conditions are present.

Page 507 of 647

NISSAN PATHFINDER 2022  Owner´s Manual To use the engine block heater:
1. Turn the engine off.
2. Open the hood and unwrap the engineblock heater cord.
3. Plug the engine block heater cord into a grounded 3-wire, 3-pronged extension
cord.
Page:   1-8 9-16 next >