2022 NISSAN PATHFINDER automatic engine start

[x] Cancel search: automatic engine start

Page 443 of 647

NISSAN PATHFINDER 2022  Owner´s Manual TURNING THE RAB SYSTEM
ON/OFF
Perform the following steps to turn the RAB
system ON or OFF.
1. Press the
button until “Settings” dis-
plays in the vehicle information display.
Use the scroll dial

Page 446 of 647

NISSAN PATHFINDER 2022  Owner´s Manual –The braking force becomes poor
due to wet brakes af ter driving
through a puddle or washing the
vehicle.
• Turn the RAB system off in the follow-
ing conditions to prevent the occur-
rence of an

Page 452 of 647

NISSAN PATHFINDER 2022  Owner´s Manual NOTE:
•The AEB with Pedestrian Detection sys-
tem will be automatically turned on
when the engine is restarted.
• The I-FCW system is integrated into the
AEB with Pedestrian Detection system.
Ther

Page 458 of 647

NISSAN PATHFINDER 2022  Owner´s Manual Action to take:
When the VDC system is on, the AEB with
Pedestrian Detection system will resume
automatically.
SYSTEM MALFUNCTION
If the AEB with Pedestrian Detection sys-
tem malfunctions, it will be

Page 465 of 647

NISSAN PATHFINDER 2022  Owner´s Manual NOTE:
•The I-FCW system will be automatically
turned on when the engine is restarted.
• The I-FCW system is integrated into the AEB with Pedestrian Detection system.
There is not a separate select

Page 474 of 647

NISSAN PATHFINDER 2022  Owner´s Manual Action to take:
If the warning message appears, stop the
vehicle in a safe place, press the park but-
ton to engage the P (Park) position, and
turn the engine off. When the radar signal is
temporarily

Page 480 of 647

NISSAN PATHFINDER 2022  Owner´s Manual System malfunction
If the Intelligent Driver Alertness system
malfunctions, the system warning mes-
sage will appear in the vehicle information
display and the function will be stopped
automatically.A

Page 489 of 647

NISSAN PATHFINDER 2022  Owner´s Manual to a non-slipping drive wheel. Theindicator light flashes if this occurs. All
other VDC functions are off and the
indicator light will not flash.
The VDC system is automatically reset to
on when the i