Po
sition of the jack support points Co
ver of the jack support points
Before positioning the jac k,you must remo vethe
co vers forth e jack support points. #
T
T o r
o r emov
emov e:
e: turn clip 1onthe co ver one
qu arter turn and remo ve. #
Pull the co ver down wards using handle 2
until the co verre leases at theto p of the longi-
tudinal member panel. #
Remo vethe co ver. Co
ver of the jack support points #
T
To
o /t:
/t: insert tabs 3 ofthe co ver into the
re cesses of the longitudinal member panel
and press the co vers closed. 342
342
Wheels and tyres
#
Insert retaining clip 1into the co ver,as
shown in the illust ration, until you hear it
engage in the 0oor bush.
Make sure that the 0oor bush in theve hicle is
cor rectly aligned tothe co ver. &
W
W ARNI NG
ARNI NGRisk of injury from inco rrect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of th
e jack must be positioned vertically
under the jacking point of theve hicle. *
N
NOOTE
TE Damage totheve hicle due tousing
an unsuitable jack Yo
u can damage theve hicle and, in particular,
th e high-voltage battery if you use a jack that
is not speci/cal lydesigned forth e jack sup-
port points of theve hicle. #
Only use jac ksthat are speci/cal ly
designed forth e jack support points, or
use an appropriate adap ter. *
N
NO
OTE
TE Risk of damage totheve hicle due
to incor rect positioning of the jack If
yo u do not position the jack at the designa-
te d jack support points, you could damage
yo ur vehicle and, in particular, the high-voltage
batter y. #
Only position the jack at the designated
jack support points. #
Take thera tchet out of the tyre-change tool kit
and place it on the he xagon nut of the jack so
th at the letters "AUF" are visible. #
Position support 5of jack 7on jack sup-
port point 4. #
Turn ratchet 6clockwise until support 5
sits comple tely on jack support point 4and
th e base of the jack lies evenly on thegr ound. Wheels and tyres
343
343
