2022 MERCEDES-BENZ E-CLASS COUPE warning

The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is braked heavily from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1.A A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LEDInt
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 132)
R Cornering light (/ page 132)
R Motorw ay mode (/ page 133)
R Enhanced fog light function (/ page 133)R
Bad weather light (/ page 133)
R City lighting (/ page 133)
The system is active only when it is dar k.
A
A ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the low beam is
switched on.
Depending on theve hicle's equipment, the course
of the lane in which you are driving will also be ev
aluated and the active headlamps function will
adjust the light in advance.
Cor
Cor ner nering light function
ing light function The cornering light impr
ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight bends,
fo rex ample. The cornering light can be activated
only when the low beam is switched on.
The function is active in thefo llowing cases:
R Atspeeds below 40 km/h when the turn sig-
nal light is switched on or the steering wheel
is turned 132
132
Light and sight

Multimedia system:
4 © 5
Settings 5
Lights
5 Intelligent Light System #
Switch the function on or o.. A
A
dap
dap tiv
tive Highbeam Assist
e Highbeam Assist A A
dap dap tiv
tive Highbeam Assis
e Highbeam Assist function t function&
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist
Ad aptive Highbeam Assist does not react to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognise other road users
with their own lighting, or may recognise them
to o late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be activated despite
the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist is only an aid. You are
re sponsible for adjusting theve hicle's lighting to
th e pr evailing light, visibility and tra1c conditions. Ad
aptive Highbeam Assist automatically switches
between thefo llowing types of light:
R Low beam
R High beam
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.134 134
Light and sight

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Light and sight
135 135

W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Intermittent wiping, normal
3 Å Intermittent wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wipes with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 312). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 139).
The wiper arms will mo veinto there placement
position.
R R emo emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. Light and sight
139
139

#
T
To r
o r emov
emov e t
e the wiper blade:
he wiper blade: pressrelease knob
2, pull the wiper blade in the direction of
ar ro w 3 and remo ve.
F
F itting t
itting t he wiper blades
he wiper blades #
Push the new wiper blade onto the wiper arm
in the direction of ar row 1 until release knob
2 engages. #
Press the wiper blade be yond the point of
re sis tance in the direction of ar row 3 onthe
wiper arm.
The wiper blade will engage with a noticeable
click and mo vefreely again. #
Foldthe wiper arm back onto the windscreen. #
Switch on theve hicle. #
Press but tonî onthe combination switch
(/ page 139).
The wiper arms will return totheir original
positions.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Mirr Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. 142
142
Light and sight

&
W
W ARNI NG
ARNI NGRisk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. F
F
olding t
olding t he outside mirr
he outside mirr or
ors in/out
s in/out #
Brie0y press button 1.
R
R ese
ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Brie0y press but ton1. A
A
djus
djusting t ting t he outside mirr
he outside mirr ors
ors #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Press button 2toadjust the position of the
mir ror glass.
Eng
Eng aging t
aging t he outside mirr
he outside mirr ors
ors #
Vehicles without elect rically folding outside
mir rors: manually mo vethe outside mir ror into
th e cor rect position. #
Vehicles with elect rically folding outside mir-
ro rs: press and hold button 1.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. Light and sight
143
143

Multimedia system:
4 Climate menu 5
Air quality
The frag rance system distributes a pleasant fra-
gr ance thro ughout theve hicle interior from a 0a-
con located in the glo vebox. #
Select AIR FRESHENER. #
Keep pressing until the desired intensity is
re ached.
Inser
Inser ting or r
ting or r emo
emoving t
ving t he
he0acon
0acon of t
of the fr
he fr agr
agrance
ance
syst
syst em
em &
W
WARNING
ARNING Risk of injury from liquid per-
fume
If ch ildren open the 0acon, they could drink
th e liquid perfume or it could come into con-
ta ct with their eyes. #
Do not lea vechildren unattended in the
ve hicle. #
Consult a doctor immediately if liquid
perfume has been drunk. #
If liquid perfume comes into contact with
your eyes or skin, rinse your eyes with
clean water. #
If sym ptoms continue, consult a doctor. +
ENVIR ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmental
damage due toimproper disposal of full
0acons Fu
ll 0acons must not be disposed of
with household waste. #
Fu
ll 0acons must be take nto a
harmful subs tance collection point. 1
Cap
2 Flacon #
T
To inse rt
o insert: :slide the 0acon into the holder as far
as it will go. #
T
To r
o r emov
emov e:
e:pull out the 0acon.
If yo u do not use genuine Mercedes-Benz interior
perfumes, obser vethe manufacturers' saf ety noti-
ces on the perfume pac kaging. 150
150
Climate control

Dispose of
thege nuine Mercedes-Benz interior
perfume 0acon when it is em pty and do not re/ll
it.
R R e/llable
e/llable 0acon
0acon #
Unscr ewthe cap of the em pty 0acon. #
Fillth e 0acon with a maximum of 15 ml. #
Screw the cap back onto the 0acon.
Alw aysre /ll the em ptyre /llabl e0acon with the
same perfume. Obser vethe separate information
sheet with the 0acon. S
S
t
tationar
ationar y heat
y heat er/v
er/ventilation
entilation S
S
t
tationar
ationar y heat
y heat er/st
er/stationar
ationar y v
y ventilation function
entilation function
The following functions are per form ed:
R The air inside theve hicle is heated or ventila-
te dto the set temp erature.
R The air inside theve hicle cann otbe cooled
down to temperatures below the outside tem-
perature.
R Ifth e outside temp erature changes, ventilation
mode automatically switches toheating mode or heating mode automatically switches
to
ve ntilation mode.
The stationary hea ter and theex haust gas outl et
are situated at theright-hand front wheel.
Switc
Switc hing t
hing t he st
he stationar
ationar y heat
y heat er/v
er/ventilation
entilation on/o.
on/o.
via t
via t he oper
he oper ating unit
ating unit &
D
DAN
AN GER
GER Risk of fatal injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventila-
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter theve hi-
cle. This is the case in enclosed spaces or if
th eve hicle gets stuck in sno w,forex ample. #
Always switch the stationary heater o. in
enclosed spaces without an air extrac-
tion system, e.g. in garage s. #
Keep theta ilpipe and the area around
th eve hicle free from snow when the
ve hicle or the auxiliary heating is run-
ning. #
Open a door or a roof hatch on the wind-
wa rdside of theve hicle toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of /re due tohot station-
ary heater components and exhaust gases
Flammable materials such as lea ves, grass or
twigs may ignite. #
When the stationary heater is switched
on, make sure that:
R hot vehicle parts do not come into
contact with 0ammable materials.
R theex haust gas can 0ow out of the
stationa ryheater exhaust pipe unhin-
dered.
R theex haust gas does not come into
contact with 0ammable materials. *
N
NOOTE
TE Bat tery dischar gecaused bysta-
tionar y heater or stationaryventilation
ope ration Operating
the stationary heater or stationary
ve ntilation drains the batter y. Climate control
151
151