2022 MERCEDES-BENZ E-CLASS COUPE display

&
W
W ARNI NG
ARNI NGRisk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
yo u and other vehicle occupants – particular ly
ch ildren – could become trapped. #
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat. #
If someone becomes trapped, press a
preset position button or seat adjust-
ment switch immediatel y.&
W
W ARNI NG
ARNI NGRisk of entrapment if the mem-
ory function is activated bychildren
Children could become trapped if they acti-
va te the memory function, particular lywhen
unat tended. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. Yo
u can use the memory function when theve hi-
cle is switched o..
Seat adjustments for up tothre e people can be
stored and called up using the memory function.
Yo u can sa vesettings forth efo llowing systems:
R Seat, backrest and head restraint
R Steering wheel
R Outside mir rors
R Head-up display Oper Oper
ating t
ating t he memor
he memor y function
y function S
S
t
tor
or ing
ing #
Set the desired position for all systems. #
Brie0y press theV memory button and
th en press preset position button 4,T
or U within thre e seconds.
An acoustic signal sounds. The settings are
stored. Seats and st
owing
115 115

Thr
Through-loading f
ough-loading f eatur
eature in t
e in the r
he rear benc
ear benc h seat
h seat
(EASY
(EASY -PAC
-P AC K Quic
K Quic kf
kfold)
old) F
F
olding t
olding t he r
he rear seat bac
ear seat bac kr
kres
est f t forw
orw ar
ards
ds &
W
WARNI NG
ARNI NGRisk of accident and injury if
th ere ar ben chseat/ rear seat and seat
backrest are not engaged
Re ar ben chseat, rear seat and seat backrest
can fold forw ards.
R As a result, theve hicle occupant is
pressed against the seat belt. The seat
belt cannot per form its intended pr otective
function and could cause additional inju-
ri es.
R Objects or loads in the boot cannot be
re strained bythe seat backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. LeT LeT
and r
and r ight seat bac
ight seat bac kr
kres
ests: ts: ifth e seat backrest
is not engaged and loc ked in place, this will be shown on
the multifunction display on the inst ru-
ment cluster.
Centr Centr e seat bac e seat bac kr
krest:
est: ifth e seat backrest is not
engaged and loc ked, there d lock veri/cation indi-
cator will be visible.
R R eq
equir uir ements:
ements:
R The rear seat backrest head restraints are ful ly
inser ted.
Yo u can fold the centre and outer seat backrests
fo rw ards separatel y. #
V Vehicles wit ehicles wit hout a memor
hout a memor y function:
y function:movethe
driver's or front passenger seat forw ards, if
necessar y. #
V Vehicles wit ehicles wit h a memor
h a memor y function:
y function: if at least
one section of there ar seat backrest is folded
fo rw ards, the cor responding front seat will
mo veforw ards slightl y,if necessar y,to avo id a
collision. Seats and st
owing
119
119

#
T
To f
o f old t
old t he
heleT
leT and r
and r ight seat bac
ight seat bac kr
kres
ests f ts f or-
or-
w
w ar
ar ds:
ds: pull release le ver1. #
T
To f
o f old t
old t he centr
he centr e seat bac
e seat bac kr
kres
est f t forw
orw ar
ards:
ds: pull
re lease catch 3of seat backrest 2for-
wa rds. #
Foldthe cor responding seat backrest for-
wa rds. F
F
olding bac
olding bac k t
k the r
he r ear seat bac
ear seat bac kr
krest
est
* NO
NOTE
TEDamage caused bytrapping the
seat belt when folding back the seat bac k-
re st The seat belt could become trapped and
thus
be damaged when the seat backrest is folded
bac k. #
Make sure that the seat belt is not trap-
ped when folding back the seat backrest. #
V
Vehicles wit
ehicles wit hout a memor
hout a memor y function:
y function:movethe
driver's or front passenger seat forw ards, if
necessar y. #
V
Vehicles wit
ehicles wit h a memor
h a memor y function:
y function: if at least
one part of the seat backrest in there ar is fol-
ded bac k, the cor responding front seat will
automatically return tothe most recent origi-
nal position. #
Foldthe cor responding seat backrest 1back
until it engages.
LeT LeT and r
and r ight seat bac
ight seat bac kr
kres
es ts:
ts: ifth e seat bac k-
re st is not engaged and lo cked in place, this
will be shown on the multifunction display on
th e inst rument cluster.
Centr Centr e seat bac e seat bac kr
krest:
est: ifth e seat backrest is
not engaged and loc ked, there d lock veri/ca-
tion indicator 2will be visible. 120
120
Seats and
stow ing

A list of Qi-compatible mobile phones can be
fo und at: https://www.mercedes-benz-
mobile.com. #
Place the mobile phone as close tothe centre
of mat 1as possible with the display facing
upwards.
When thech arging symbol is shown in the
multimedia system, the mobile phone is being
ch arge d.
Malfunctions during thech arging process are
shown in the central displa y.
% The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwater. R
R adio eq adio eq uipment appr ov
uipment appr oval number
al number s f
s f or Br
or Br azil
azil
This device operates on a secondary basis, that is
to say it has no pr otection against harmful inter-
fe re nce, not even from the same type of stations,
and must not cause inter fere nce with systems
ope rating on a prima rybasis.
This product is permitted in accordance with the
procedure de/ned in Directive 242/2000 bythe
Brazilian telecommunications agency ANATEL and
meets the applicable tech nical requ irements.
Fu rther information is available on the ANATEL
we bsite. www.anatel.go v.br #
Further information on the declaration of con-
fo rm ity forve hicle components which receive
and/or transmit radio waves. F
F
itting and r
itting and r emo
emoving t
ving t he
he0oor
0oor mats
mats &
W
WARNING
ARNING Risk of accident due toobjects
in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal. This jeopardises
the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cann otget into the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. Seats and st
owing
127 127

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Light and sight
135 135

Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
R ULTRA RANGE Highbeam ULTRA RANGE Highbeam increases
the bright-
ness of the cone of light tothe legally permitted
maximum.
Pa rtial high beam does not include other road
users in the high beam area. It does not dazzle
th em but enables full high beam illumination for
th e driver apart from theex cluded vehicles.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam and the high beam will
be switched o. automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds abo ve40 km/h:
R If no other road users are de tected on a
st ra ight road, ULTRA RA NGE Highbeam will be
switched on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.R
If high ly re0ective signs are de tected, ULTRA
RANGE Highbeam will be switched o. auto-
maticall y.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the_ indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. 136
136
Light and sight

#
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm in
th e direction of ar row 4. F
F
itting t
itting t he wiper blades
he wiper blades #
Insert the new wiper blade into the wiper arm
in the direction of ar row 1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor-
re ctl y. #
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch.
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing.
Maint Maint enance display
enance display
The maintenance display is available only with
standard windscreen wipers. 140
140
Light and sight

Se
Se
tting t
tting t he depar
he depar tur
ture time
e time #
Brie0y press theu button. #
Press the, or. button repeatedly
until the time tobe changed appears on the
displa y. #
Press theu and^ buttons simultane-
ousl y.
The Îsymbol on there mo tecont rol display
will 0ash. #
Use the, and. buttons toset the
desired departure time. #
Press theu and^ buttons simultane-
ousl y.
The new departure time will be stored.
Up tothre e departure times can be stored. #
T
To activ
o activ at
at e t
e t he depar
he depar tur
ture time:
e time: selectthe
desired departure time and press and hold
th eu button.
The Ísymbol, the departure time and,
depending on the selected departure time, the
letter A A, B , B or CCwill appear on the displa y. #
T To deactiv o deactiv at
ate t
e t he depar
he depar tur
ture time:
e time: selectthe
desired departure time and press and hold
th e^ button.
OFF
OFF will appear on the displa y. #
T
To c
o c hec
hec k t
k the st
he st atus of t
atus of t he activ
he active st
e stationar
ationar y
y
heat
heat er
er:
:brie0y press theu button.
Switc
Switc hing
hingo.
o.immediat
immediat ely
ely #
Press and hold the^ button.
Ov
Ov er
ervie
vie w of t
w of t he r
he remot
emot e contr
e contr ol display
ol display s (st
s (station-
ation-
ar
ar y heat
y heat er/v
er/ventilation)
entilation) 1
Stationary ventilation switched on
2 Stationary heater switched on 3
Selected departure time
4 Remaining time forth e stationary heater/
ve ntilation (in minutes)
5 Stationary heater/ ventilation active
6 Departure time activated
7 Signal strength
Fu rther possible displ ays:
R T
Time:
ime: the activated departure time.
R Zer
Zero minut
o minut es:
es:theru nning time forth e station-
ary heater is extended because the engine has
not yetreached operating temp erature when it
is star ted.
R OFF:
OFF: the stationary heater/ventilation is
switched o..
R
R eplacing t
eplacing t he r
he remot
emot e contr
e contr ol batt
ol batter
ery (st
y (st ationary
ationary
heat
heat er)
er) &
D
DAN
AN GER
GER Risk of fatal injuries if batteries
are swallo wed
Batteries contain toxic and cor rosive subs tan-
ces. Swall owing batteries may cause se vere
internal burns within two hours. Climate control
153
153