#
During starting assistance, alw aysta ke
care toconnect only battery term inals of
identical polarity. #
During starting assistance, obser vethe
sequence described for connecting and
disconnecting the jump leads. #
Do not connect or disconnect the bat-
te ry term inals with the engine running. &
W
W ARNI NG
ARNI NGRisk of explosion due toexplo-
sive mixture of gases
An explosive mixture of gases can escape
from the battery during charging and starting
assis tance. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Make sure there is adequate ventilation. #
Do not stand overth e batter y. &
W
WARNI NG
ARNI NGRisk of explosion from a frozen
battery
A dischar ged battery may freeze at temp era-
tures slightly abo veor below freezing point.
During starting assistance or battery charging,
battery gas can be released. #
Always allow a battery tothaw before
ch arging it or per form ing starting assis-
ta nce. If
th e indicator/warning lamps in the inst rument
clus ter do not light up at low temp eratures, it is
ve ry likely that the dischar ged battery has frozen.
In this case you may neither jump-start theve hi-
cle nor charge the batter y.
The service life of a bat tery that has been thawed
may be dramatically shor tened. The starting char-
acteristics may be impaired, especially at low
te mp eratures.
It is recommended that you ha veath awe d battery
ch ecked at a quali/ed specialist workshop. All v
All v ehicles
ehicles
* NO
NOTE
TEDamage caused bynume rous or
ex tended attem ptsto start the engine Numerous or
extended attem ptsto start the
engine may damage the catalytic con verter
due tonon-combusted fuel. #
Avoid numerous and extended attem pts
to start the engine. Obser
vethefo llowing points during starting assis-
ta nce and when charging the batter y:
R Only use undamaged jump lead/charging
cables with a su1cient cross-section and
insulated term inal clamps.
R Non-insulated parts of thete rm inal clamps
must not come into contact with other me tal
parts while the jump lead/charging cable is
connected tothe battery/jump-start connec-
tion point.
R The jump lead/charging cable must not come
into contact with any parts which may mo ve
when the engine is running. Breakdown assistance
327 327
&
W
WARNI NG
ARNI NGRisk of accident due torepea-
te d pressure drop in the tyres
The wheels, valves or tyres could be damaged.
To o low a tyre pressure can lead tothe tyres
bursting. #
Examine the tyres forfo re ign objects. #
Check whe ther the tyre has a puncture
or theva lve has a leak. #
Ifyo u are unable torectify the damage,
contact a quali/ed specialist workshop. Information on
there commended tyre pressure
fo rth eve hicle's factor y-/tted tyres can be found
on the tyre pressure table on the inside of the fuel
/ller 0ap (/ page 340).
Use a suitable pressure gauge tocheck the tyre
pressure. The outer appearance of a tyre does not
permit any reliable conclusion about the tyre pres-
sure.
Only cor rect tyre pressures when the tyres are
cold. Conditions for cold tyres:
R The vehicle has been par ked with the tyres out
of direct sunlight for at least thre e hours. R
The vehicle has tr avelled less than 1.6 km.
The vehicle's tyres heat up when driving. As the
te mp erature of the tyres increases, so too does
th e tyre pressure.
V
V ehicles wit ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring syst
ing syst em:
em:
yo u can also check the tyre pressure using the
on-board computer (/ page 341).
Not
Not es on tr
es on tr ailer oper
ailer oper ation
ation
Alw ays in0ate there ar axle tyres tothere com-
mended tyre pressures on the tyre pressure table
fo r increased load. T
T
yr
yr e pr
e pr essur
essur e t
e table
able The tyre pressure
table is on the inside of the fuel
/ller 0ap. The tyre pressure
table sho ws there commended
tyre pressure for all tyres appr ovedfo rth is vehi-
cle. The recommended tyre pressures apply for
cold tyres under various operating conditions, i.e.
loading and/or speed of theve hicle.
If one or more tyre sizes precede a tyre pressure,
th efo llowing tyre pressure information is only
va lid forth ose tyre sizes and their respecti veload
condition. 340
340
Wheels and tyres
If
th e preceding tyre sizes are complemented by
th e+ symbol, the tyre pressure information
fo llowing sho wsalternative tyre pressures. Fuel
consum ption may then increase slightl y.
The load conditions "pa rtially laden" and "fully
laden" are de/ned in theta ble for di.erent num-
bers of passengers and amounts of luggage. The
actual number of seats may di.er from this. T
T
yr
yr e pr
e pr essur
essur e monit
e monit or
oring syst
ing syst em
em F
F
unction of t
unction of t he tyr
he tyre pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
The system checks the tyre pressure and the tyre
te mp erature of the tyres /t tedtotheve hicle by
means of a tyre pressure sensor.
The tyre pressure and the tyre temp erature
appear in the on-board computer (/ page 341).
If th ere is a substantial pressure loss or if the tyre
te mp erature is excessive, you will be warned with
display messages (/ page 421) ortheh
wa rning lamp in the inst rument cluster
(/ page 444).
The tyre pressure monitoring system is only an
aid. It is the driver's responsibility toset the tyre pressure
tothere commended cold tyre pressure
suitable forth e operating situation.
In most cases, the tyre pressure monitoring sys-
te m will automatically update the new refere nce
va lues aTer you ha vechanged the tyre pressure.
Yo u can, ho wever, also update there fere nce val-
ues byrestarting the tyre pressure monitoring
system manually (/ page 342).
Syst
Syst em limits
em limits
The system may be impaired or may not function
particular lyin thefo llowing situations:
R incor rect refere nce values were ta ught in
R sudden pressure loss caused byafo re ign
object penetrating the tyre, forex ample
R there is a malfunction caused byano ther radio
signal source
Chec
Chec king t
king t he tyr
he tyr e pr
e pressur
essur e wit
e with t
h the tyr
he tyr e pr
e pressure
essure
monit
monit or
oring syst
ing syst em
em
R
R eq
equir uir ements:
ements:
R The vehicle is switched on. On-board computer:
4 Service 5
Tyres
One of thefo llowing displa ysappears:
R Current tyre pressure and tyre temp erature of
th e individual wheels: R
Tyre pressures will be displayed after a few
minutes of driving
R Tyre pressure monitor active: thete ach-in
process of the system is not yetcomple te. The
tyre pressures are already being monitored. #
Compare the tyre pressure with there com-
mended tyre pressure forth e cur rent ope rat-
ing condition (/ page 340).Additionall y, Wheels and tyres
341 341
Inter
changing the front and rear wheels if the
wheels or tyres ha vedi.erent dimensions can
re nder thege neral ope rating permit in valid.
Obser vethe inst ructions and saf ety no tes on
"Changing a wheel" (/ page 343)
The wear patterns on the front and rear wheels
di.er:
R front wheels wear more on the tyre shoulder
R rear wheels wear more in the centre of the
tyre
Do not drive with tyres that ha vetoo little tread
dep th. This signi/cantly reduces traction on wet
ro ads (aquaplaning).
On vehicles with the same front and rear wheel
size, you can inter change the wheels every
5,000 to10,000 km, depending on thewe ar.
Ensu rethe direction of rotation is maintained for
th e wheels. N
No
ot
tes on st
es on st or
oring wheels
ing wheels When storing wheels, obser
vethefo llowing no tes:
R ATer removing wheels, store them in a cool,
dry and preferably dark place.
R Protect the tyres from contact with oil, grease
or fuel. Ov
Ov
er
ervie
vie w of t
w of t he tyr
he tyr e-c
e-chang
hang e t
e tool kit
ool kit *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. Apart from some countr
y-speci/c variants, vehi-
cles are not equipped with a tyre-change tool kit.
Fo r more information on which tyre-changing
to ols are requ ired and appr ovedfo r per form ing a
wheel change on your vehicle, consult a quali/ed
specialist workshop.
Re quired tyre-changing tools may include,
fo re xamp le:
R Jack R
Chock
R Wheel wrench
R Centring pin
% The jack weighs appr oximately 3.4 kg.
The maximum load capacity of the jack can
be found on the identi/cation plate on the
jac k.
The jack is maintenance-free. If there is a
malfunction, please contact a quali/ed spe-
cialist workshop.
The tyre-change tool kit is located in tool bag 1
in the boot.
% Depending on theve hicle equipment, theto ol
bag may be located at other positions in the
boot. Wheels and tyres
347
347
Oper
Oper
ating
ating 0uids
0uids N
No
ot
tes on oper
es on oper ating
ating0uids
0uids *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of injury from operating
0uids harmful toyour health
Operating 0uids may be poisonous and harm-
ful toyour health. #
Obser vethete xt on the original contain-
ers when using, storing or disposing of
operating 0uids. #
Always store operating 0uids sealed in
th eir original containers. #
Alwayske ep children away from operat-
ing 0uids. +
ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEPollution of the
environment due toirre sponsible disposal
of operating 0uids Incor
rect disposal of operating 0uids can
cause considerable damage tothe environ-
ment. #
Dispose of operating 0uids in an environ-
mentally responsible manner. Operating 0uids include
thefo llowing:
R fuels
R DeNOx agent AdBlue ®
forex haust gas aTer-
treatment
R lubricants
R coolant
R Brake 0uid
R windscreen washer 0uid
R climate cont rol system refrigerant
Only use products appro vedby Mercedes-Benz.
Damage caused bythe use of products that ha ve
not been app rove d is not co veredby the
Mercedes-Benz warranty or goodwill gestu res. The operating 0uids appr
ovedby Mercedes-Benz
can be identi/ed bythefo llowing inscriptions on
th e container:
R MB-F reigabe (e.g. MB-F reigabe 229.51)
R MB-Appr oval (e.g. MB -Appr oval 229.51)
Fu rther information on appr oved operating 0uids:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop &
W
WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before and during refuelling, switch o.
th eve hicle and, if /tted, the stationary
heater. 360
360
Te
ch nical data
&
W
W ARNI NG
ARNI NGRisk of injury from fuels
Fu els are poisonous and hazardous toyour
health. #
Do not swallow fuel or let it come into
contact with skin, eyes or clo thing. #
Do not inhale fuel vapour. #
Keep children away from fuel. #
Keep doors and windo wsclosed during
th ere fuelling process.
If yo u or other people come into contact with
fuel, obser vethefo llowing: #
Immediate lyrinse fuel o. your skin with
soap and water. #
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical at tention
immedia tely. #
Ifyo u swallow fuel, seek medical atten-
tion immediatel y.Do not induce vomit-
ing. #
Change immediately out of clo thing that
has come into contact with fuel. Flexible-fuel
vehicles can be refuelled wi th thefo l-
lowing fuel types:
R unleaded petrol
R E85 fuel
R a mixture of E85 fuel and unleaded petrol
Flexible-fuel vehicles can be identi/ed bythe
Et
Et hanol up t
hanol up t o E85
o E85sticker on the inside of the fuel
/ller 0ap.
Depending on the countr y,the fuels you can use
in your vehicle may di.er from the information in
th e Owner's Manual. The fuels that ha vebeen
appr ovedfo ryo ur vehicle can be found on the
inst ruction label on the inside of the fuel /ller 0ap. F F
uel
uel Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h pe
h petr
trol
ol
engines
engines
Obser vethe no tes on operating 0uids
(/ page 360). *
N NOOTE
TE Damage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
Only refuel using unleaded, sulphu r-free
spar k-ignition engine fuel that conforms
to European EN 228, or an equivalent
speci/cation.
Fu el of this speci/cation may contain up to
10% ethanol byvolume. Your vehicle is suita-
ble for use with E10 fuel. #
See the information label in fuel /ller 0ap
fo rot her compatible fuels .
Ne verre fuel wi thone of thefo llowing fuels:
R Diesel
R Regular petrol with an octane number
lo we rth an 91 RON
R Petrol with more than 3% me thanol byvol-
ume, e.g. M15, M30
R Petrol with additives containing me tal Te
ch nical data
361
361
If
yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indications for fuel
apply toyour vehicle: 1
For petrol with maximum of 5% ethanol byvol-
ume
2 For petrol with maximum of 10% ethanol by
vo lume Ac
cording toEuropean standard EN 16942, you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label on the
fuel /ller 0ap (/ page 173)
R Onthe fuel dispenser or pump nozzle suitable
fo ryo ur vehicle thro ughout Europe
If th eav ailable fuel is not su1ciently low in sul-
phur, it may produce unpleasant odours.
The recommended octane number foryo ur vehi-
cle can be found on the information label on the
fuel /ller 0ap (/ page 173).
E 350, E 450 4MA
E 350, E 450 4MA TIC:
TIC: Refuel using only super
unleaded petrol of at least 98 RON if you wish to
achie vemaximum engine output. Alternativel y,
yo u can also refuel using premium-g rade unlea-
ded petrol of at least 95 RON.
All models:
All models: As atemp orary measure, if there com-
mended fuel is not available, you may also refuel
wi th regular unleaded petrol with an octane num-
ber of at least 91 RON.This may reduce engine
output and increase fuel consumption.
Ne verre fuel using petrol of a lo werRO N. Fu
rther information on fuel can be obtained at a
/lling station or a quali/ed specialist workshop.
Inf Inf or
ormation on additiv
mation on additiv es in pe
es in petr
tr ol (v
ol (v ehicles with
ehicles with
pe
pe tr
trol engine)
ol engine)
Obser vethe no tes on operating 0uids
(/ page 360).
* NO
NOTE
TEDamage from use of unsuitable
additives Even small amounts of
the wrong additive may
lead tomalfunctions occur ring. #
Only add cleaning additives recommen-
ded byMercedes-Benz tothe fuel. Mercedes-Benz
recommends that you use brand-
name fuels with additives.
In some countries, the fuel available may not ha ve
su1cient additives. Deposits could build up in the
fuel injection system as a result. In this case, in
consultation with a Mercedes-Benz service
centre, mix the fuel with the cleaning additive rec-
ommended byMercedes-Benz. Obser vethe no tes
and mixing ratios indica ted on theta nk. 362 362
Te
ch nical data
Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h a die-
h a die-
sel engine
sel engine
Gener Gener al not
al not es
es
Obser vethe no tes on operating 0uids
(/ page 360). &
W
WARNING
ARNING Risk of /re from fuel mixtu re
If yo u mix diesel fuel with petrol, the 0ash
point of the fuel mixture is lo werth an that of
pure diesel fuel. #
Neverre fuel using petrol in diesel
engines. #
Never mix petrol with diesel fuel. *
N
NO OTE
TE Damage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system.
V
V ehicles wit
ehicles wit h a diesel par
h a diesel par ticulat
ticulate
e/lt
/lt er:
er: #
Only refuel using sulphur-free diesel fuel
th at conforms toEuropean standard
EN 590, or an equivalent speci/cation.
In count ries without sulphur-free diesel
fuel, refuel using only lo w-sulphur diesel
fuel with a sulphur content less than
50 ppm.
V
V ehicle wit
ehicle wit hout diesel par
hout diesel par ticulat
ticulate
e/lt
/lt er:
er: #
Only refuel using diesel fuel wi tha sul-
phur content less than 500 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure fatty acid me thyl ester or veget able
oil
R Para1n or kerosene
If yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indications for fuel
apply toyour vehicle: 1
For diesel fuel with a maximum of 7% fatty
acid me thyl ester byvolume (bio-diesel)
2 For diesel fuel with a maximum of 10% fatty
acid me thyl ester byvolume (bio-diesel)
Ac cording toEuropean standard EN 16942 you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label on the
fuel /ller 0ap (/ page 173) Te
ch nical data
363 363