2022 MERCEDES-BENZ E-CLASS CABRIOLET light

A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the acous
he acous tic loc
tic locking
kingv
ver
er i/-
i/-
cation
cation signal
signal Multimedia system:
4 © 5
Settings 5
Vehicle #
Activate or deactivate Acoustic lock.
% Please observ
Please observ e:
e:
The selected setting forth e acoustic locking
ve ri/cation signal must comply with there le-
va nt national road and tra1c regulations. In
some countries, including German y,using the
acoustic locking veri/cation signal is forbid-
den bytra1c la ws(in accordance with §16
Pa ra. 1 and §30 Para. 1 of the German
national road tra1c regulations). The driver of
th eve hicle must comply with these regula-
tions. In countries where the use of this func-
tion is forbidden, this function is not activated
in theve hicle and must not be activated. Changing t
Changing t
he unloc
he unlocking se
king se ttings
ttings Po
ssible unlocking functions of theke y:
R Central unlocking
R Unlocking the driver's door and fuel /ller 0ap #
T
To switc
o switc h be
h betw
tween se
een se ttings:
ttings: presstheÜ
and ß buttons simultaneously for appr ox-
imately six seconds until the indicator lamp
0ashes twice.
Options if the unlocking function forth e driver's
door and fuel /ller 0ap has been selected:
R T
To unloc
o unloc k t
k the v
he v ehicle centr
ehicle centr ally
ally:
:press the
Ü button twice.
R V
Vehicles wit
ehicles wit h KEYLESS-GO:
h KEYLESS-GO: ifyo uto uch the
inner sur face of the door handle on the driv-
er's door, only the driver's door and the fuel
/ller 0ap are unloc ked. Deactiv
Deactiv
ating t
ating the function of t
he function of t hekey
he key V
V
ehicles wit
ehicles wit h KEYLESS-GO:
h KEYLESS-GO: ifyo u deactivate the
function of theke y,the KEYLESS-GO functions are
also deactivated. Access or drive authorization by
KEYLESS-GO is then no longer possible with that
particular key.Activate the function of theke y so
th at all its functions will again be available.
Yo u can also deactivate the function of theke yto
re duce the energy consum ption of theke y if you do not use
theve hicle or a keyfo r an extended
period of time. #
Deactiv
Deactiv at
ate:
e: Press ßand hold theke y but-
to n. #
With th eke y pressed, ßimmediately press
th eke y but tonÜ twice in quick succes-
sion.
The indicator light of theke y lights up once
brie0y and once for a long time. #
T To activ
o activ at
ate:
e: press any button on thekey.
% When theve hicle is star ted with theke y in the
st ow age compartment of the centre console,
th e function of theke y is automatical lyactiva-
te d (/ page 157). Opening and closing
77
77

R
R
emo
emo ving/inser
ving/inser ting t
ting the emerg
he emerg encykey
ency key R R
emo emo ving t
ving t he emerg
he emerg encykey
ency key #
Press release button 1.
Emer gency key2 is pushed out slightl y.#
Pull out eme rgency key2 until it en gage s in
th e intermediate position. #
Press release button 1again and fully
re mo veemer gency key2.
Inser
Inser ting t
ting t he emerg
he emerg encykey
ency key #
Press release button 1. #
Insert emer gency key2 tothe intermediate
position or fully until it engages. %
You can use the intermediate position of
emer gency key2 toattach theke yto akey
ri ng. R
R
eplacing t
eplacing t heke
he key batt
y batt ery
ery &
D
DAN
AN GER
GER Risk of fatal injuries due toswal-
lowing batteries
Bat teries contain toxic and cor rosive subs tan-
ces. Swall owing batteries may cause se vere
internal burns tooccur within two hours.
There is a risk of fatal injur y. #
Keep batteries out of there ach of chil-
dren. #
Ifth e cap and/or the battery compart-
ment does not close securel y,do not use
th eke y any lon ger and keep it out of the
re ach of children. #
If batteries are swallo wed, seek medical
attention immediatel y. +
ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmen tal
damage due toimproper disposal of bat-
te ries Batteries contain pollutants. It is
illegal todispose of them with the household
ru bbish. #
Dispose of batteries in an
environmentally responsible manner.
Ta ke dischar ged batteries toaqu ali/ed
specialist workshop or toa collection
point for used batteries. R
R
eq
eq uir
uir ements:
ements:
R Youre qu ire a CR 2032 3 V cell batter y.
Mercedes-Benz recommends that you ha vethe
battery replaced at a quali/ed specialist work-
shop. #
Remo vethe emer gency key (/ page 78). 78
78
Opening and closing

*
N
NO
OTE
TE Damage tothe soT top due to
heavy objects Heavy, poin
ted or sharp-edged objects placed
on the soT top may damage it. #
Do not place any heavy objects on the
soT top. #
Do not sit on the soT top. Fo
r saf etyre asons, Mercedes-Benz recommends
opening or closing the soT top when theve hicle is
stationar y.
To open or close the soT top while you are driving,
do not exceed a maximum speed of 50 km/h. To
avo id inter rupting the closing process while you
are slightly exceeding this speed, do not drive at a
speed greater than 60 km/h. #
Make sure that the boot separator is closed. #
Close the boot lid. #
Switch on theve hicle. #
Keep the brake pedal depressed when the
ve hicle is stationar y. #
T To open: o open: pull and hold soT-top switch 1until
th e soT top is fully open.
The instrument display will show the opening
process of the soT top. #
T To close:
o close: press and hold soT-top switch 1
until the soT top is fully closed.
The instrument display will show the closing
process of the soT top. &
W WARNING
ARNING Risk of accident due toexces-
sive speed during the soT top opening or
closing procedure
If th eve hicle speed exceeds 60 km/h, the
soT top will stop during the opening or closing
procedure. #
Reduce theve hicle speed tobelow
60 km/h or stop theve hicle in accord-
ance with the tra1c conditions. #
Operate the soT- topswitch again to
open or close the soT top full y. The cur
rent procedure will be stopped at a speed
gr eater than 60 km/h. The message is shown on
th e inst rument displa y. #
Reduce your speed and press or pull soT top
switch 1again.
If th e soT top does not close fully because of
strong headwinds, drive more slo wlyor stop. 88
88
Opening and closing

#
V
Vehicles wit
ehicles wit h an aut
h an automatic boo
omatic boo t separ
t separat
ator:
or:
press button 1.
Boot separator 2will open or close automati-
call y.
% Intheev ent of a system failure, close auto-
matic boot separator 2manuall y. A
A
ctiv
ctiv ating or deactiv
ating or deactiv ating AIRC
ating AIRC AP
AP AIR
CAPre duces the draught in the front and rear
compartments when you are driving with the soT
to p open.
Pa rticular lyturbulent air can reduce the e.ect of
AIR CAP.This can occur when you are driving
behind ano ther vehicle or if there is a crosswind,
fo rex ample.
AIR CAP consists of thefo llowing components:
R a wind de0ector abo vethe windscreen
R a draught stop behind the two rear seat head
re straints
When AI RCAP is activated, the wind de0ector and
th e draught stop will extend simultaneousl y.AIR
CAP can be activated or deactivated at speeds
of up toappr oximately 160 km/h. &
W
WARNING
ARNING Risk of becoming trapped when
re tracting AIR CAP
Somebody could become trapped. #
Make su rethat nobody holds on tothe
upper frame of the windscreen or
to uches the wind de0ector or draught
stop. #
Switch on theve hicle. #
T To activ
o activ at
ate:
e: pull but ton1.
AIR CAP will extend and the indicator lamp on
button 1will light up. #
T To deactiv
o deactiv at
ate:
e: press button 1.
AIR CAP will retract and the indicator lamp on
button 1will go out. 90 90
Opening and closing

#
Switch on theve hicle. #
T
To open:
o open: press and hold but ton1 tothe
point of resis tance. #
T
To open full y:
o open full y:press and hold button 1
be yond the point of resis tance. #
T
To close:
o close: pull and hold button 1.
A
A ut
ut omatic rev
omatic rever
er sing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
W ARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting. The
reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
W button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply The side windo
wswill be closed as far as theve n-
tilation position rega rdless of the status of the
soT top.
If th e side windo wsare obstructed during auto-
matic closing, the side window concerned will
open again slightl y.ATer an other automatic clos-
ing process, the automatic function may be deac-
tivated. The automatic function will be active
again the next time theve hicle is star ted. Conv
Conv enience opening (v enience opening (v entilating t
entilating t he v
he vehicle
ehicle
bef
bef or
ore st
e st ar
arting a jour
ting a jour ne
ney)
y) &
W
WARNING
ARNING Risk of entrapment when open-
ing a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. #
When opening, make sure that nobody is
to uching the side windo w. #
Release the button immediately if some-
body becomes trapped. Opening and closing
95
95

N
N
o
ot
tes on t
es on t he corr
he corr ect dr
ect driv
iver's seat position
er's seat position &
W
WARNING
ARNING Risk of injury if vehicle settings
are adjusted while theve hicle is in motion
Yo u could lose control of theve hicle in partic-
ular in thefo llowing situations:
R Ifyo u adjust the driver's seat, the head
re straints, the steering wheel or the mir ror
while theve hicle is in motion.
R Ifyo ufa sten your seat belt while theve hi-
cle is in motion. #
Before starting the engine: adjust the
driver's seat, head restraints, stee ring
wheel and mir ror in particular and fasten
yo ur seat belt. Ensure
thefo llowing when adjusting steering
wheel 1, seat belt 2and driver's seat 3:
R You are sitting as farawa y from the driver's
airbag as possible, taking thefo llowing points
into consideration:
R You are sitting in an upright position
R Your thighs are slightly suppor tedby the seat
cushion R
Your legs are not fully extended and you can
depress the pedals proper ly
R The back of your head is suppor ted at eye
le ve lby the centre of the head restraint
R You can hold the steering wheel with your
arms slightly bent
R You can mo veyour legs freely
R You can see all the displa yson the inst rument
cluster clear ly
R You ha vea good overview of the tra1c condi-
tions
R Your seat belt sits snugly against your body
and passes across the centre of your shoulder
and across your hips in the pelvic area 100
100
Seats and st
owing

#
T
To mov
o mov e f
e forw
orw ar
ards:
ds: pull the head restraint for-
wa rds. #
T
To mov
o mov e bac
e backw
kwar
ards:
ds: press release knob 1
and push the head restraint ba ckwards. F
F
itting/r
itting/r emo
emoving t
ving t he r
he rear seat head r
ear seat head r es
estr
tr aints
aints
R
R emo
emo ving
ving #
Release there ar seat backrest and fold it for-
wa rds slightly (/ page 120). #
Push release knob 1inthe direction of the
ar ro w and pull the head restraint up and out. Inst
Inst
alling
alling #
Inse rtthe head restraint su chthat the notches
on the bar are on the leT when vie wed in the
direction of tr avel. #
Push the head restraint down until it engages. #
Foldthere ar seat backrest back until it
engages. Con/gur
Con/gur
ing
ingt
the seat se
he seat se ttings
ttings Multimedia system:
4 © 5
Comfort 5
Seat comfort
A
A djus
djusting t ting t he bac
he bac kr
kres
es t cont
t cont our in t
our in t he lumbar
he lumbar
r
r egion of t
egion of t he seat bac
he seat bac kr
kres
es t (lumbar)
t (lumbar) #
Select Lumbar. #
Select the settings Zforth e desired seat. #
Adjust the air cushions.
A
A djus
djus ting t
ting t he bac
he bac kr
kres
est side bolst t side bolst ers
ers #
Select Side bolsters. #
Adjust the air cushion forth e desired seat. 106
106
Seats and st
owing

Switc
Switc
hing t
hing t he seat heating
he seat heating on/o.
on/o. &
W
WARNING
ARNING Risk of bu rns due torepeatedly
switching on the seat heating
Re peatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding tobecome very hot.
In particular, the health of persons with limited
te mp erature sensitivity or a limited ability to
re act tohigh temp eratures may be a.ected or
th ey may even su.er burn-like injuries. #
Do not repeatedly switch on the seat
heating. To
protect against overheating, the seat heating
may be temp orarily deactivated aTer it has been
switched on repeatedl y.
* N
NO
O TE
TE Damage tothe seats caused by
objects or documents when the seat
heater is switched on When
the seat heater is switched on, over-
heating may occur due toobjects or docu- ments placed on
the seats e.g. seat cushions
or child seats. This could cause damage tothe
seat sur face. #
Make sure that no objects or documents
are on the seats when the seat heater is
switched on. R
R
eq
eq uir
uir ements:
ements:
R The po wer supply is switched on. #
Press button 1repeatedly until the desired
heating le vel is set.
Depending on the heating le vel, up tothree
indicator lamps will light up. If all indicator
lamps are o., the seat heating is switched o..
% The seat heating will automatically switch
down from theth re e heating le vels aTer 8, 10
and 20 minutes until the seat heating
switches o.. 110 110
Seats and st
owing