2022 MERCEDES-BENZ AMG GT COUPE battery

%
The gearshiT recommendation is active only if
yo u ha veenabled manual gearshiTing
(/ page 188). Using kic
Using kic
kdo
kdown
wn #
Maximum acceler
Maximum acceler ation:
ation:depress the accelera-
to r pedal be yond the point of resis tance.
The automatic transmission will shiT up tothe
next gear when the maximum engine speed is
re ached toprotect the engine from overrev ving.
% Ifyo u ha veactivated manual gearshiTing with
th e button on the centre console, the trans-
mission will not react tothe kickdown. Glide mode function
Glide mode function
%
Mer
Mercedes-
cedes- AMG G
AMG G T 63 S E P
T 63 S E P erf
erfor
ormance:
mance: The
function is not available.
Wi th an anticipatory driving st yle, Glide mode
helps youto reduce fuel consum ption. Glide mode is
characterised bythefo llowing:
R Mer
Mer cedes-
cedes- AMG G
AMG G T 63 and G
T 63 and G T 63 S 4MA
T 63 S 4MA TIC+:
TIC+:
The combustion engine is disconnected from
th e driv etra in and theve hicle continues toroll.
R Allot
All other models: her models: The combustion engine is
switched o.. All of theve hicle functions
re main active.
R The J symbol appears in the inst rument
displa y.
Glide mode is activated if thefo llowing conditions
are met:
R ECO start/s top function is switched on.
R Drive prog ram = is selected with the drive
setting "Moderate" or "Reduced".
R The speed is within a suitable range.
R The road's course is suitable, e.g. no steep
uphill or downhill inclines or tight bends.
R Mer
Mer cedes- cedes- AMG G
AMG G T 43, G
T 43, G T 43 4MA
T 43 4MA TIC+ and
TIC+ and
G
G T 53 4MA
T 53 4MA TIC+:
TIC+:The state of charge ofthe
battery is su1cient.
R You are no longer depressing the accelerator
or brake pedal. Glide mode is deactivated again if one of
the con-
ditions is no longer met. F
F
unction of t
unction of t he 4MA
he 4MATIC
TIC
4MATIC ensures that all four wheels are driven.
To get her with ESP ®
and 4ETS, 4MATIC impr oves
th e traction of your vehicle whene ver a driven
wheel spins due toinsu1cient traction.
If yo ufa ilto adapt your driving style, 4MATIC can
neither reduce therisk of an accident nor override
th e la wsof ph ysics. 4MATIC cannot take account
of road, weather and tra1c conditions. 4MATIC is
only an aid. You are responsible especially for
maintaining a safe distance from theve hicle in
front, forve hicle speed, for braking in good time
and for st aying in lane.
% In wintry road conditions, the maximum e.ect
of 4MATIC can be achie ved only if you use
winter tyres (M+S tyres), with snow chains if
necessar y. 190
190
Driving and parking

Char
Char
ging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery (plug-in
y (plug-in
h
h ybr
ybr id)
id) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt ery
ery *
N
NOOTE
TE High-voltage battery damage due to
leaving theve hicle idle for lengt hyperiods
of time Lithium-ion batteries
experience a natural self-
dischar ge.
Exhausti vedischarging can therefore occur if
th eve hicle is idle for se veral months. This can
damage the high-voltage batter y.#
Toavo id damage, please obser vethefo l-
lowing recommendations when handling
th e high-voltage batter y.*
N
NO
OTE
TE Accelerated ageing of the high-volt-
age battery due tonot observing thefo l-
lowing recommendations As a
result of its basic characteristics, the
storage capacity of and the amount of energy
av ailable from the high-voltage battery decrease
over the course of its life. As a
re sult, the maximum electrical range that can
be achie vedby theve hicle is reduced and its
maximum electrical output can be impaired.
The following factors could accelerate the age-
ing of the high-voltage batter y:
R a high le vel of charge , especially if the
ve hicle is idle for a lengt hyperiod of time
R leaving theve hicle idle for lengt hyperiods
at high ambient temp eratures #
Toavo id accelerated ageing, please
obser vethefo llowing recommendations
when handling the high-voltage batter y. Re
commendations when handling the high-voltage
batter y:
R If leaving theve hicle idle for lengt hyperiods,
park up theve hicle with a high- voltage battery
ch arge leve l between 25% and 30%. Do not
ke ep the high-voltage battery continuously
connected topowe r supply equipment. R
If leaving theve hicle idle for lengt hyperiods of
time avoid, if possible, high ambient temp era-
tures.
R Check the high-voltage battery's charge level
ev ery six weeks (/ page 204).
R Char gethe high-voltage battery if thech arge
le ve l is below 15%.
R Ifth e high-voltage battery is only used with at
low charge leve ls, fully charge the high-voltage
battery every six months.
R Do not disconnect the 12 V battery even if the
ve hicle is leT idle for a lengt hyperiod. Other-
wise, the condition of theve hicle's high- volt-
age battery cannot be monitored.
Char
Char ging op
ging op tions f
tions for t
or the high-v
he high-v olt
oltag
age batt
e batt ery
ery
(mode 2 and 3)
(mode 2 and 3)
The high-voltage battery will be charge dby recu-
peration while you are driving. The electric mo tor
ser ves as an alternator when in overrun mode and
during braking.
Yo u ha vethefo llowing options tocharge while
stationar y:
R Ata mains soc ket (mode 2) 194 194
Driving and parking

R
Atawa llbox or charging station (mode 3)
Obser vethe di.erent grid requ irements of your
cur rent location when charging. Only use charging
cables which conform tothegr id requiremen ts.
Consult a quali/ed elect rician or your local grid
operator if you ha veany questions.
It is recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to
th e impr ovedch arging per form ance and better
ch arging e1ciency o.ered.
S
S t
to
o wing t
wing t he c
he char
harging cable
ging cable
Alw ays st owtheve hicle charging cable in the
ch arging cable bag pr ovided and secure it in the
load compartment of your vehicle.
Otherwise, thech arging cable is not su1ciently
secured.
Sy Sy st
stem limits
em limits
The po wer output of the high-voltage battery may
be impaired bythefo llowing:
R High or low outside temp eratures R
Electrical auxiliary consumers in theve hicle
being switched on, e.g. operating the air con-
ditioning system
R Extended periods without charging
The charging time of the high-voltage battery may
be increased bythefo llowing:
R High or low outside tempe ratures
R Extended periods without charging
R The maximum available charge cur rent of the
ch arging facility N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery at t
y at t he
he
mains soc ke
mains soc ket (mode 2)
t (mode 2) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toa mains
soc ket using incor rectly ins talled component
parts could cause a /re or an electric shoc k,
fo rex ample. #
Only connect thech arging cable to a
mains soc ketth at: R
Has been proper lyinstalled and
R Has been inspected byaqu ali/ed elect ri-
cian #
For saf etyre asons, only use thech arging
cable supplied with theve hicle or an
original Mercedes-Benz charging cable. #
Purchase these parts at a Mercedes-
Benz Service Centre and obtain advice
th ere.
Mercedes-Benz thoroughly tests these original
ch arging cables forth eir suitability for high-
vo ltage charging of your vehicle. #
Never use a damaged charging cable. #
Do not use:
R Extension cables
R Extension reels
R Multiple soc kets #
Never use soc ket ada pters toconnect
th ech arging cable tothe mains soc ket.
The only exception being if the adap ter
has been tested and appro vedby the Driving and parking
195 195

manufacturer
forch arging the high-volt-
age battery of an electric vehicle. #
Obser vethe saf ety no tes in the operat-
ing inst ructions forth e soc ket ada pter. Only
thefo llowing charging cables may be used:
R The charging cable supplied with theve hicle.
R Ach arging cable that has been appr ovedfor
th eve hicle.
The charging process can vary depending on the
po we r supply equipment. The charging times
when charging the high-voltage battery at the
mains soc ket are considerably longer than when
ch arging at a wallbox or charging station.
When doing so, alw ays obser vethe local informa-
tion.
Do not lea vethech arging cable cont rols hanging
loose from a mains soc ket.
Do not liT the controls bythefo llowing compo-
nent parts:
R thech arging cable connector
R the mains plug When
charging, pr otect thech arging cable cont rol
element from excessive heat such as direct sun-
light. Otherwise, thech arging process may be
cancelled. N No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
er y at a
y at a
w
w allbo
allbo x or c
x or c har
harging st
ging st ation (mode 3)
ation (mode 3) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toawa llbox
using incor rectly ins talled component parts
could cause a /re or an electric shoc k,for
ex ample. #
Only connect thech arging cable to a
wa llbox that:
R Has been proper lyinstalled and
R Has been inspected byaqu ali/ed elect ri-
cian #
For saf etyre asons, only use charging
cables that ha vebeen tested and
appro vedby the manufacturer forch arg- ing
the high-voltage battery in an electric
ve hicle. #
Never use damaged charging cables. #
Do not extend thech arging cable. #
Do not use adap ters. #
Obser vethe saf ety no tes in the operat-
ing inst ructions forth ewa llbox. If
ch arging at a wallbox without pre-ins talled
cable, use the optionally available charging cable
fo rwa llbox and charging station (mode 3). The
ch arging cable is st owed in a bag in the boot/
luggage compartment.
Only use charging cables that ha vebeen tested
and appro vedby the manufacturer forch arging
th e high-voltage battery in an electric vehicle. &
D DAN
AN GER
GER Risk of fatal injuries due todam-
aged components
Connecting thech arging cable toach arging
station using a damaged component part
could cause a /re or an elect ric shoc k,for
ex ample. 196 196
Driving and parking

#
Forch arging stations with a preinstalled
ch arging cable:
R Perform a visual check of thech arg-
ing station for obvious faults, such as
massive damage tothe housing or
ch arging cable. #
Forch arging stations without a preinstal-
led charging cable:
R For saf etyre asons, only use charging
cables that ha vebeen tested and
appro vedby the manufacturer for
ch arging the high-voltage battery in
an electric vehicle.
R Never use damaged charging cables.
R Do not extend thech arging cable.
R Do not use adap ters. #
Make sure toobser vethe saf ety in form a-
tion on thech arging station. Most
charging stations must be activated before
th ech arging process, e.g. using an RFID card.
Obser vethe on-site operator's inst ructions forthe
ch arging station. The amount of ene
rgy dispensed forth ech arging
process, shown bythech arging station, may be
higher than the amount of energy actually absor-
bed bythe high-voltage batter y.This is there sult
of di.erent le vels of charging losses and is descri-
bed as rech arge e1ciency. Charging losses occur,
fo rex ample, due toheat that builds up when
ch arging or from auxiliary consumers that are
switched on. Further information on rech arge e1-
ciency can be obtained at a quali/ed specialist
wo rkshop. Se
Se
tting t
tting t he maximum per
he maximum per missible c
missible char
harging cur-
ging cur-
r
r ent f
ent f or c
or char
harging at a mains soc ket
ging at a mains soc ket *
N
NO
OTE
TE Overloading the mains soc ket due
to excessive charging cur rent If
th ech arging cur rent is too high, the fuse
could be tripped or theex tern al mains supply
could overheat. #
Make sure that theex tern al mains supply
has been designed tohandle the set
ch arging cur rent. #
For saf etyre asons, only use thech arging
cable supplied with theve hicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables forth eir suitabil-
ity for high-voltage charging of your vehi-
cle. Pur chase these parts at a Mercedes-
Benz Service Centre and obtain advice
th ere. #
Check the maximum charging cur rent
using thech arging capacity shown in the
Instrument Displ ay. The
charging cable supplied is set toa countr y-
speci/c maximum charging cur rent value. When
ch arging abroad, the maximum value may exceed
th e permitted value forth at countr y. #
Before charging at a mains soc ket, ha vethe
maximum permissible charging cur rent forthe
re leva nt mains soc ket or the building inspec-
te dby aqu ali/ed elect rician. #
When abroad, obser vethe count ry-speci/c
la ws when charging. Driving and parking
197 197

Ty
pe 1 vehicle soc ket Ty
pe 2 vehicle soc ket #
Press theto p leT of soc ket 0ap 1and swing
th e soc ket 0ap open outwards.
The % indicator lamp 4and soc ket lamp
5 light up whi te.
% When thehy brid system is activated (the
õ display in the Instrument Display lights
up), soc ket 0ap 1cannot be opened. #
Press catch 3tothe leT and fold open
soc ket co ver7. #
Tocharge at a mains soc ket, insert the mains
plug into the mains soc ket of theex tern al
po we r source tothe stop and set the maxi-
mum charging cur rent if requ ired
(/ page 197). #
Insert thech arging cable connector into vehi-
cle soc ket2 tothe stop. If thewa llbox/
ch arging station is not equipped with a charg-
ing cable, inse rtthe plug of theve hicle's
ch arging cable into thewa llbox/charging sta-
tion soc ketto the stop.
Make sure that thech arging cable is not taut
when inser ted.
The # indicator lamp 6and soc ket lamp
5 0ash orange and, as soon as the high-volt-
age battery is charge d, gre en.
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arging
side is shown in the Instrument Display with a
ch arging prediction. The charging prediction 202
202
Driving and parking

re
fers to the time at which the high-voltage bat-
te ry will be fully charge d.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
% The vehicle is equipped with an elect rical fuse
which pr otects it against overvoltage in the
mains suppl y.This electrical fuse may trip dur-
ing se vere thunderstorms, forex ample, and
may cause the fuse in the building totrip or
may inter rupt thech arging process. These
functions pr otect theve hicle.
ATer the fuse in the building is switched on
again, thech arging process resumes automat-
icall y.Fo llowing an inter ruption in the po wer
supply without the fuse in the building being
tripped, it may take up to te n minutes for
ch arging toresume automaticall y. Ending t Ending t
he c
he char
harging pr
ging pr ocess
ocess %
Depending on the national version, theve hicle
is equipped with one of thefo llowing vehicle
soc kets. Ty
pe 1 vehicle soc ket Ty
pe 2 vehicle soc ket #
Unlo cktheve hicle.
The charging process is then ended. The %
indicator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
V
Vehicle soc ke
ehicle soc ket, type 1:
t, type 1: press and hold button
2 onthech arging cable connector and Driving and parking
203
203

%
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R
R eleasing eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the inst rument
clus ter goes out.
Emerg
Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is in motion, the
Release parking brake message is displayed
and there d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the inst ru-
ment clus ter. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a park ed
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, fore xamp le, in a
two-stor eygarage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Syst
Syst em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact,
fo re xamp le, if an outside mir ror is torn o. or
th e paint is damaged byakey
R an impact occurs at low speed R
the electric parking brake is not applied
% You are responsible foryo ur vehicle. There-
fo re , alw ays make sure that your vehicle is
free of damage and is roadwor thy. N N
o
ot
tes on par
es on par king up t
king up the v
he vehicle
ehicle If
yo u lea vetheve hicle par ked up for longer than
six weeks, it may su.er damage thro ugh disuse.
The 12 V battery may also be impaired or dam-
aged byheavy discharging.
% Further information can be obtained at a
qu ali/ed specialist workshop. S S
t
tandb
andb y mode (e
y mode (e xt
xtension of t
ension of t he st
he start
arter batt
er batt er
ery's
y's
per
per iod out of use)
iod out of use) S
S
t
tandb
andb y mode function
y mode function
% This function is not available for all models.
If standby mode is activated, energy loss will be
minimised during extended periods of non-opera-
tion. 208
208
Driving and parking