2022 MAZDA MODEL MX-5 MIATA trunk

[x] Cancel search: trunk

Page 118 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual NOTE
The theft-deterrent system can also be
armed by activating the auto relock
function with both the doors, the trunk
lid and the hood closed.
Refer to Transmitter on page 3-5.
The system will

Page 156 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual SignalWarning Lights Page
*Door-Ajar Warning Indication 7-40
*Trunk lid-Ajar Warning Indication7-40
*Low Fuel Warning Indication/Warning Light
7-40
Check Fuel Cap Warning Light*17-40
*Low Washer Fluid

Page 288 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual Sunvisors
When you need a sunvisor, lower it for use
in front.
▼Va n i t y  M i r r o r s
To use the vanity 
mirror, lower the
sunvisor.
Interior Lights
NOTE
Do not leave the lights on for long peri

Page 289 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual NOTE
To prevent the battery from being
discharged, do not leave the trunk open
for a long period when the engine is not
running.
▼Illuminated Entry System
The overhead lights turn on when any of
the

Page 335 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual Light Bulbs
Overhead lightSide turn signal lights
High-mount brake light
Trunk light
Front side-marker lights
Front turn signal lights
Headlights (Low/High beam)
Parking lights
Daytime running lights

Page 339 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual 6. Install the new side turn signal unit inthe reverse order of the removal
procedure.
Rear turn signal lights
1. Make sure the ignition is switched off, and the headlight switch is off.
2. Pull the c

Page 341 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual 7. Remove the screw and nut. 
8. To remove the rear combination lampunit, insert your finger from inside the
trunk and into the hole from which the
grommet was removed in Step 5, and
while holding the

Page 344 of 503

MAZDA MODEL MX-5 MIATA 2022  Owners Manual Trunk light
1. Wrap a small flathead screwdriver witha soft cloth to prev ent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.