2022 HYUNDAI SANTA FE HYBRID remote start

Safety System
3-22
System precautions
[
Make sure that all the windows are
closed. If the window is open, the
alert may operate by the sensor
detecting an unintended movement
(for example wind or bugs).

[ „Cluster „Steering wheel
OTMH030009NOTM050216
If you do not want to use Rear
Occupant Alert, press the OK button
on the steering wheel when the first
alert is displayed on the cluster. Doing
so will deactivate the second alert one time.

[ An alert can occur if the there is an
impact on the roof.

[ If boxes or objects are stacked in the
vehicle, the system may not detect
the boxes or objects. Or, the alert may
operate if the boxes or objects fall off.

[ The sensor may not operate normally
if the senor is blocked with foreign
substances.

[ The alert may operate if movement
in the driver or passenger seat is
detected.

[ The alert may operate with the doors
locked due to car wash or surrounding
vibration or noise.

[ If the vehicle is started remotely (if
equipped with Remote Start), inside
movement detection will stop.
WARNING
Even if your vehicle is equipped with
Rear Occupant Alert, always make sure
to check the rear seat before you leave
the vehicle.
Rear Occupant Alert may not operate when:
[ Movement does not continue for
a certain period of time or the
movement is small.

[ The rear passenger is covered with
an object such as a blanket.

[ Always be cautious of the
passenger’s safety as the detection
function and second alert may
not operate depending on the
surrounding environment and certain conditions.

05
5-5
Information

[ After unlocking the tailgate, the tailgate
will lock automatically.

[ The word “HOLD” is written on the button to inform you that you must
press and hold the button for more than one second.
Start-up
For detailed information refer to “Key
Ignition Switch” in chapter 6.
NOTICE
To prevent damaging the remote key:
[ Keep the remote key away from
water or any liquid and fire. If
the inside of the remote key gets
damp (due to drinks or moisture),
or is heated, internal circuit may
malfunction, excluding the car from
the warranty.

[ Avoid dropping or throwing the
remote key.

[ Protect the remote key from extreme
temperatures.
Mechanical key
OPDE046003
If the remote key does not operate
normally, you can lock or unlock the door
by using the mechanical key.
To unfold the key, press the release
button then the key will unfold
automatically.
To fold the key, fold the key manually
while pressing the release button.
NOTICE
Do not fold the key without pressing the
release button. This may damage the
key.
Remote key precautions
The remote key will not work if any of the
following occur:
[ The key is in the ignition switch.

[ You exceed the operating distance
limit (about 10 m [30 feet]).

[ The remote key battery is weak.

[ Other vehicles or objects may be blocking the signal.

[ The weather is extremely cold.

[ The remote key is close to a radio
transmitter such as a radio station or
an airport which can interfere with
normal operation of the remote key.

05
5-7
Smart Key (if equipped)
„Type A
OTM050003
„Type B
OTM050004
Your HYUNDAI uses a smart key, which
you can use to lock or unlock a door (and
tailgate) and even start the engine even
just carrying the key.
1. Door lock
2. Door unlock
3. Tailgate open / Close (Power tailgate)
4. Panic Open / Close
5. Remote Smart Parking Assist (Forward)
6. Remote Smart Parking Assist (Backward)
7. Remote start
„Type C
OTMA050022
„Type D
OTMA050021
1. Door lock
2. Door unlock
3. Panic
4. Remote Smart Parking Assist (Forward)
5. Remote Smart Parking Assist (Rearward)
6. Remote start

05
5-9
Unlocking your vehicle
OTM048000
1. Make sure you have the smart key in your possession.
2. Press the Door Unlock button (2) on the smart key or press the button on
the front door to unlock the doors.
3. All of the doors will unlock. When the doors unlock, the hazard warning
lights will blink two times and the chime will sound.

[ The door handle button will only
operate when the smart key is
within 0.7~1 m (28~40 inches) from the outside door handle.

[ If you do not open the door after unlocking within 30 seconds, it will
return to the lock mode.

[ If you unlocked the door with the
door handle, the doors cannot be
locked with the sensor within 2 seconds.
Opening the tailgate
To open the tailgate:
1. Make sure you have the smart key in your possession.
2. Press either the tailgate open/close button on the vehicle or press and
hold the tailgate open button on the
smart key for more than one second.
The hazard warning lights will blink
two times and the tailgate will open. Remotely starting vehicle (if equipped)
You can start the vehicle using the
Remote Start button on the smart key.
To start the vehicle remotely:
1. Press the door lock button on the
smart key within 10 m (32 feet) from
the vehicle.
2. Press the Remote Start button for more than 2 seconds within 4 seconds
after pressing the door lock button.
3. The hazard warning lights will blink and the engine will start.
4. To turn off the remote start function, press the Remote Start button once.
Information

[ The vehicle must be in P (Park) for the
remote start function to start.

[ The engine turns off if you get on the
vehicle without a registered smart key.

[ The engine turns off if you do not get
on the vehicle within 10 minutes after
remotely starting the vehicle.

[ The Remote Start button may not operate if the smart key is not within 10 m (32 feet).

[ The vehicle will not remotely start if the
engine hood or tailgate is opened.

[ Do not idle the engine for a long period.
Remotely moving vehicle forward or
reverse (if equipped)
With the smart key, the driver can move
the vehicle forward or reverse using the
Forward or Reverse button on the smart
key.
For more details, refer to “Remote
Smart Parking Assist (RSPA)” section in
chapter 7.

05
5-29
OTMA050005
2. Position the garage door opener remote 1 – 3 inches (2 – 8cm) away
from the HoleLink buttons.
3. While the HomeLink indicator light (7) is flashing orange, press and hold the
hand-held remote button. Continue
pressing the handheld remote button
until the HomeLink indicator light (7)
changes from orange to green. You
may now release the handheld remote
button.
4. Wait until your garage door comes to a complete stop, regardless of
position, before proceeding to the
next steps.
5. Press and release the HomeLink button you are programming and
observe the indicator light.

[ If the indicator light remains solid
green, your device should operate
when the HomeLink button is
pressed. At this point, if your device
operates, programming is complete.

[ If the indicator light rapidly
flashes green, firmly press, hold
for two seconds and release the
HomeLink button up to three times
in a row slowly to complete the
programming process. Do not press
the HomeLink button rapidly. At
this point if your device operates,
programming is complete. If the
device does not operate, continue
with step 6. 6. At the garage door opener motor,
(security gate motor, etc.) locate the
“Learn”, “Smart”, “Set” or “Program”
button. This can usually be found
where the hanging antenna wire is
attached to the motor-head unit (see
the device’s manual to identify this
button). The name and color of the
button may vary by manufacturer.
ODL3A040504

à A ladder and/or second person may
simplify the following steps.
7. Firmly press and release the “Learn”, “Smart”, “Set” or “Program” button.
You now have up to 30 seconds in
which to complete the next step.
8. Return to the vehicle and firmly press, hold for two seconds and release,
the HomeLink button up to three
times in a row slowly. Do not press
the HomeLink button rapidly. As soon
as you see the garage door start to
move, stop pressing any buttons
until a few seconds after the garage
door has come to a complete stop,
regardless of position. At this point,
programming is complete and your
device should operate when the
HomeLink button is pressed and
released.

6
6. Driving Your Vehicle
Before Driving ................................................................................................... 6-4Before Entering The Vehicle ....................................................................................... 6-4
Before Starting ............................................................................................................ 6-4
Ignition Switch .................................................................................................. 6-5 Engine Start/Stop Button ............................................................................................6-5
Remote Start ................................................................................................................ 6-9
Automatic Transmission ..................................................................................6-10 Automatic Transmission Operation ........................................................................... 6-10
Parking ....................................................................................................................... .6-13
LCD display message ................................................................................................. 6-14
Paddle Shifter ............................................................................................................. 6-15
Good Driving Practices .............................................................................................. 6-15
Coasting Guide ................................................................................................. 6-17
Braking System ................................................................................................6-18 Power Brakes .............................................................................................................. 6-18
Disc Brakes Wear Indicator........................................................................................ 6-19
Electronic Parking Brake (EPB) .................................................................................. 6-19
Auto Hold (if equipped) .............................................................................................6-24
Anti-Lock Brake System (ABS) ................................................................................... 6-27
Electronic Stability Control (ESC) .............................................................................6-29
Vehicle Stability Management (VSM) ....................................................................... 6-31
Hill-Start Assist Control (HAC) .................................................................................. 6-32
Trailer Stability Assist (TSA) .......................................................................................6-33
Downhill Brake Control (DBC) ..................................................................................6-33
Good Braking Practices ............................................................................................ 6-36
All Wheel Drive(AWD) ..................................................................................... 6-37 All Wheel Drive(AWD) Operation .............................................................................. 6-38
Emergency Precautions ............................................................................................ 6-42
Reducing The Risk Of A Rollover .............................................................................. 6-44
Drive Mode Integrated Control System (AWD) ............................................ 6-45 Drive Mode ................................................................................................................ 6-45
Multi Terrain Mode .................................................................................................... 6-48

06
6-9
Remote Start (if equipped)
„Type A
OTM060003
„Type B
OTM060004
You can start the vehicle using the
Remote Start button of the smart key. To start the vehicle remotely:
1. Press the door lock button within 10 m
(32 feet) from the vehicle.
2. Press the remote start (
) button for
over 2 seconds within 4 seconds after
locking the doors. The hazard warning lights will blink.
3. To turn off the remote start function, press the remote start (
) button
once.

[ The remote start (
) button may not
operate if the smart key is not within
10 m (32 feet).

[ The vehicle will not remotely start if
the engine hood or tailgate is opened.

[ The vehicle must be in P (Park) for the
remote start function to start.

[ The engine turns off if you get in the
vehicle without a registered smart key.

[ The engine turns off if you do not get
in the vehicle within 10 minutes after
remotely starting the vehicle.

[ Do not idle the engine for a long period.

07
7-71
OTM070142N
Smart Cruise Control Reaction
With the engine on, select ‘Driver
DVVLVWDQFH
Ÿ6&&UHVSRQVH
TIURPWKH
settings menu to select the sensitivity of
vehicle speed when following the front
vehicle to maintain the set distance.
OTM070141N
Warning volume
With the engine on, select ‘Driver
DVVLVWDQFH
Ÿ:DUQLQJYROXPH
TIURPWKH
Settings menu to change the Warning
YROXPH
S+LJK
T
S0HGLXP
TRU
S/RZ
TIRU
Smart Cruise Control.
If you change the Warning volume,
the Warning volume of other Driver
Assistance systems may change.
Information
If the engine is restarted, Warning volume will maintain the last setting.
Smart Cruise Control Operation
Operating conditions
Smart Cruise Control will operate when
the following conditions are satisfied.
Basic function

[ The gear is in D (Drive)

[ 7KHGULYHU
TVGRRULVFORVHG
[ EPB (Electronic Parking Brake) is not applied

[ Your vehicle speed is within the
operating speed range
- 10~180 km/h (5~110 mph): when there is no vehicle in front
- 0~180 km/h (0~110 mph): when there is a vehicle in front

[ ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is on

[ ESC (Electronic Stability Control), TCS
(Traction Control System) or ABS is not
controlling the vehicle

[ Engine rpm is not in the red zone

[ Forward Collision-Avoidance Assist
brake control is not operating

[ Remote Smart Parking Assist brake
control is not operating
Information
At a stop, if there is no vehicle in front of
your vehicle, Smart Cruise Control will
turn on when the brake pedal is depressed.