2022 HYUNDAI SANTA FE HYBRID charging

01
1-31
How to Disconnect Portable Charger
(ICCB: In-Cable Control Box)
OTMPHQ010009L
1. Hold the charging connector handle and pull it while pressing the release
button.
Information
To prevent charging cable theft,
the charging connector cannot be
disconnected from the inlet when the
doors are locked. Unlock all doors to
disconnect the charging connector from the inlet.
However, if the vehicle is in the charging
connector AUTO mode, the charging
connector automatically unlocks from the inlet when charging is completed.
For more details, refer to “Charging
Connector AUTO/ LOCK Mode” in this
chapter.
OTMPHQ010010L
2. Make sure to completely close the charging door.

à The charging door dose not have a
locking system.
PlugPlug Electric OutletElectric Outlet
OAEEQ016061
3. Disconnect the plug from the household electric outlet. Do not pull the cable when disconnecting the plug.
4. Close the protective cover for the charging connector so that foreign
material cannot get into the terminal.
5. Put the charging cable inside the cable compartment to protect it.

Foreword / Hybrid System Overview
1-32
Unlock Charging Connector in
Emergency
OTMPHQ010011L
If the charging connector does not
disconnect due to battery discharge and
failure of the electric wires, open the
hood and slightly pull the emergency
cable. The charging connector will then disconnect. Precautions for Portable Charger
(ICCB: In-Cable Control Box)
[
Use the portable charger that is
certified by HYUNDAI Motors.

[ Do not try to repair, disassemble, or
adjust the portable charger.

[ Do not use an extension cord or
adapter.

[ Stop using immediately when failure
occurs.

[ Do not touch the plug and charging
connector with wet hands.

[ Do not touch the terminal part of the
AC charging connector and the AC
charging inlet on the vehicle.

[ Do not connect the charging
connector to voltage that does not
comply with regulations.

[ Do not use the portable charger if it
is worn out, exposed, or there exists
any type of damage on the portable
charger.

[ If the ICCB case and AC charging
connector is damaged, cracked, or the
wires are exposed in any way, do not
use the portable charger.

[ Do not let children operate or touch
the portable charger.

Foreword / Hybrid System Overview
1-36
Plug-In Hybrid Mode (Plug-In
Hybrid Vehicle)
„EV/HEV button
OTMPHQ010012L
Pressing the [EV/HEV] button changes
the plug-in hybrid system modes,
between Electric (CD) mode and Hybrid
(CS) mode.
Each time the mode is changed a
corresponding indicator is displayed on
the instrument cluster as follows.
„AUTO mode ‡Type A ‡Type B
OTMPHQ010013LOTMPHQ010015L
„CS mode
‡Type A ‡Type B
OTMPHQ010014LOTMPHQ010016L
Plug-in hybrid mode indicator

[CD (Charge Depleting, Electric)
mode : The high-voltage (hybrid)
battery is used to drive the vehicle.

[ AUTO mode : CD mode and CS mode
are selected automatically depending
on road conditions.

[ CS (Charge Sustaining, Hybrid) mode :
The high-voltage (hybrid) battery and
gasoline engine is used to drive the
vehicle.
Information
Even when the battery charging rate is high and driving in electric mode is
possible, engine may turn on in some areas
to protect the system.

01
1-37
Infotainment system Screen (Plug-in
hybrid vehicle) (if equipped)
OTMPHQ010018L
Press [PHEV] on the [Home] screen or
the [All menus] screen and the menus
related to plug-in hybrid ([ECO driving],
[Energy information], [EV range], [Set
charging times], [Charging stations],
[Petrol stations]) are displayed.
For more information, please refer to
the Infotainment System Manual that
was separately supplied with your
vehicle.
Aux. Battery Saver+ (Plug-in
hybrid vehicle)
The Aux. Battery Saver+ is a function that
monitors the charging status of the 12 V
auxiliary battery. If the auxiliary battery
level is low, the main high voltage battery
charges the auxiliary battery.
Information
The Aux. Battery Saver+ function will
be ON when the vehicle is delivered. If the function is not needed, you may turn it off in the Users Settings mode on the
cluster. For more information, refer to the following page.
Mode
[ Cycle Mode:
When the vehicle is OFF with all doors,
hood and tailgate closed, the Aux.
Battery Saver+ periodically activates
according to the auxiliary battery status.
[ Automatic Mode:
When the ignition switch is in the ON
position with the charging connector
plugged in, the function activates
according to the auxiliary battery status
to prevent overdischarge of the auxiliary
battery.

Foreword / Hybrid System Overview
1-38
Information

[ The Aux. Battery Saver+ activates
maximum of 20 minutes. If the Aux. Battery Saver+ function activates
more than 10 times consecutively, in
the Automatic Mode the function will
stop activating, judging that there is
a problem with the auxiliary battery.
In this case, drive the vehicle for some
period of time. The function will start activating if the auxiliary battery
returns to normal.

[ The Aux. Battery Saver+ function
cannot prevent battery discharge if the auxiliary battery is damaged, worn out,
used as a power supply or unauthorized
electronic devices are used.

[ If the Aux. Battery Saver+ function was activated, the high voltage battery level
may have decreased.
System Setting
OAEPHQ049855L
The driver can activate the Aux. Battery
Saver+ function by placing the ignition
switch to the ON position and by selecting:

8VHU6HWWLQJV
Ÿ2WKHU
Ÿ$X[%DWWHU\
Saver+'
The Aux. Battery Saver+ function
deactivates, when the driver cancels the
system setting.
WARNING
OTMPHQ010017L
When the function is activating the
charging indicator lamp will quickly
blink and high voltage electricity will
be flowing in the vehicle. Do not touch
the high voltage electric wire (orange),
connector, and all electric components
and devices. This may cause electric
shock and lead to injuries. Also, do not
modify your vehicle in any way. This
may affect your vehicle performance
and lead to an accident.

01
1-39
Warning and Indicator Lights
Ready indicator
This indicator illuminates:
When the vehicle is ready to be driven. - ON : Normal driving is possible.
- OFF : Normal driving is not possible, or a problem has occurred.
- Blinking : Emergency driving.
When the ready indicator goes OFF
or blinks, there is a problem with the
system. If this occurs, you have your
vehicle inspected by an authorized
HYUNDAI dealer.
EV mode indicator
This indicator illuminates:
When the vehicle is driven by the electric
motor. - “EV” indicator ON : Vehicle is driven using the electric motor or the
gasoline engine is stopped.
- “EV” indicator OFF : Vehicle is driven using the gasoline engine.
Charging Cable Connection
Indicator (Plug-in hybrid
vehicle)
This indicator illuminates in red when the
charging cable is connected. Service warning light
This warning light illuminates:

[
When you set the ignition switch or
the Engine Start/Stop button to the ON position.

- The service warning light illuminates
for approximately 3 seconds and
then turns off when all checks have
been performed.

[ When there is a problem with the
hybrid vehicle control system or
hardware.
When the warning light illuminates
while driving, or does not go OFF after
starting the vehicle, you have the vehicle
inspected by an authorized HYUNDAI
dealer.
Regenerative brake warning
light
(yellow)
This warning light illuminates:
When the regenerative brake does not
operate and the brake does not perform
well. This causes the Brake Warning
light (red) and Regenerative Brake
Warning Light (yellow) to illuminate
simultaneously.
If this occurs, drive safely and have
your vehicle inspected by an authorized
HYUNDAI dealer. The operation of the
brake pedal may be more difficult than
normal and the braking distance may
increase.

01
1-43
Unplug vehicle to start (Plug-in
hybrid vehicle)
OAEPHQ049829L
This message is displayed when you
start the engine without unplugging the
charging cable. Unplug the charging
cable, and then start the vehicle. Charging stopped. Check the AC
chargerOOSEV048131L

[ This warning message is displayed
when charging is stopped for the
reasons below:
- There is a problem with the external AC charger
- The external AC charger stopped charging
- The charging cable is damaged
In this case, check whether there is
any problem with the external AC and
charging cable.
If the same problem occurs when
charging the vehicle with a normally
operating AC charger or genuine
HYUNDAI portable charger, we
recommend that you have your vehicle
inspected by an authorized HYUNDAI
dealer.

Foreword / Hybrid System Overview
1-44
Charging stopped. Check the cable
connection
OOSEV048196L
This warning message is displayed
when charging is stopped because the
charging connector is not correctly
connected to the charging inlet
In this case, separate the charging
connector and re-connect it and check
whether there is any problem (external
damage, foreign substances, etc.) with
the charging connector and charging
inlet.
If the same problem occurs when
charging the vehicle with a replaced
charging cable or genuine HYUNDAI
portable charger, we recommend that
you have your vehicle inspected by an
authorized HYUNDAI dealer. Remaining time (Plug-in hybrid
vehicle)OAEPHQ049818L
This message is displayed to notify
the remaining time to fully charge the
battery.
Wait until fuel door unlocks (Plug-in
hybrid vehicle)
OTMPHQ010032L
This message is displayed when you
attempt to unlock the fuel filler door with
the fuel tank pressurized. Wait until the
fuel tank is depressurized.