2022 HYUNDAI SANTA FE HYBRID display
[x] Cancel search: displayPage 490 of 638
07
7-103
Rear View Monitor Malfunction
and Limitations
Rear View Monitor malfunction
When Rear View Monitor is not working
properly, or the screen flickers, or the
camera image does not display normally,
function is inspected by an authorized
HYUNDAI dealer.
Limitations of Rear View Monitor
When the vehicle is stopped for a long
time in winter or when the vehicle is
parked in an indoor parking lot, the
exhaust fumes may temporarily blur the image.
WARNING
[ The rear view camera does not
cover the complete area behind the
vehicle. The driver should always
check the rear area directly through
the inside and side view mirror
before parking or backing up.
[ The image shown on the screen may
differ from the actual distance of the
object. Make sure to directly check
the vehicle's surroundings for safety.
[ Always keep the rear view camera
lens clean. If the lens is covered with
foreign material, it may adversely
affect camera performance and
Rear View Monitor may not operate
normally. However, do not use
chemical solvents such as strong
detergents containing high alkaline
or volatile organic solvents (gasoline,
acetone etc.). This may damage the
camera lens.
Page 492 of 638
![HYUNDAI SANTA FE HYBRID 2022 Owners Manual 07
7-105
Surround View Monitor Settings
Camera settings
OTM070213L
[ You can change Surround View
0 R Q L W R U S L V S O D \ & R Q W H Q W VT R U S L V S O D \
6 H W W L Q J V](/manual-img/35/56183/w960_56183-491.png "HYUNDAI SANTA FE HYBRID 2022 Owners Manual 07
7-105
Surround View Monitor Settings
Camera settings
OTM070213L
[ You can change Surround View
0 R Q L W R U S L V S O D \ & R Q W H Q W VT R U S L V S O D \
6 H W W L Q J V")
07
7-105
Surround View Monitor Settings
Camera settings
OTM070213L
[ You can change Surround View
0 R Q L W R U S ' L V S O D \ & R Q W H Q W VT R U S ' L V S O D \
6 H W W L Q J VT E \ W R X F K L Q J W K H V H W X S L F R Q (
) on the screen while Surround
View Monitor is operating, or selecting
S ' U L Y H U D V V L V W D Q F H Ÿ 3 D U N L Q J V D I H W \ Ÿ
& D P H U D V H W W L Q J VT I U R P W K H 6 H W W L Q J V menu while the engine is on.
[ In the Display Contents, you can
change settings for ‘Top View Parking
* X L G D Q F HT S 5 H D U 9 L H Z 3 D U N L Q J
* X L G D Q F HT D Q G S 3 D U N L Q J ' L V W D Q F H
: D U Q L Q JT Top View Parking Guidance
„Front top view
OTMA070003
„Rear top view
OTM070214L
[ : K H Q W K H S 7 R S 9 L H Z 3 D U N L Q J * X L G D Q F HT is selected, parking guidance is
displayed on the right side of the
Surround View Monitor screen.
[ 7 K H S 7 R S 9 L H Z 3 D U N L Q J * X L G D Q F HT F D Q be connected with the front top view
parking guidance or the rear top view parking guidance.
Page 493 of 638
Driver Assistance System
7-106
Rear View Parking Guidance
OTM070216L
[ When the ‘Rear View Parking
* X L G D Q F HT L V V H O H F W H G S D U N L Q J
guidance is displayed in the rear view.
[ The horizontal guideline of the Rear
View Parking Guidance shows the
distance of 0.5 m (1.6 ft.), 1 m (3.3 ft.)
and 2.3 m (7.6 ft.) from the vehicle.
Parking Distance Warning
OTM070217L
[ : K H Q W K H S 3 D U N L Q J G L V W D Q F H Z D U Q L Q JT is selected, parking distance warning
is displayed on the right side of the
Surround View Monitor screen.
[ The image will be displayed only when
Parking Distance Warning is warning
the driver. Surround View Monitor Auto On
With the engine on, select ‘Driver
D V V L V W D Q F H Ÿ 3 D U N L Q J V D I H W \ Ÿ 6 X U U R X Q G
Y L H Z P R Q L W R U D X W R R QT I U R P W K H 6 H W W L Q J V
menu to use the function.
Surround View Monitor
Operation
Operating button
OTM070072
OTM070074
[ Press the Parking/View button (1) to
turn on Surround View Monitor.
Press the button again to turn off the function.
[ Other view modes can be selected
by touching the view icons (2) on the
Surround View Monitor screen.
[ When one of the infotainment system
button (3) is pressed without the gear
in R (Reverse), Surround View Monitor
will turn off.
Page 494 of 638
07
7-107
Front view
The front image is displayed on the
screen when the gear is in N (Neutral)
orD (Drive) to assist in parking. The front
view has a top view/front view/side
view/3D view.
Operating conditions
[
When the gear is shifted from R
(Reverse) to N (Neutral) or D (Drive),
the last set mode of front view
function will be selected.
[ Front view function will operate when
the following conditions are satisfied:
- While the infotainment system screen is being displayed, press the
Parking/View button (1) briefly when
the gear is in D (Drive) or N (Neutral)
and vehicle speed is below 15 km/h
(9 mph).
[ Surround View Monitor Auto On
function will operate when the
following conditions are satisfied:
- : L W K S ' U L Y H U D V V L V W D Q F H Ÿ 3 D U N L Q J
V D I H W \ Ÿ 6 X U U R X Q G Y L H Z P R Q L W R U
D X W R R QT V H O H F W H G I U R P W K H 6 H W W L Q J V
menu, the front parking assist view
screen is displayed when Parking
Distance Warning warns the driver
while driving in D (Drive).
Off conditions
[ Press the Parking/View button (1)
again, the image will turn off.
[ When vehicle speed is above 15 km/h
(9 mph) with the gear in D (Drive),
Surround View Monitor will turn off
and the screen will change back to the
previous infotainment system screen.
Although you drive below 15 km/h (9
mph) again, Surround View Monitor
will not turn on.
[ Press one of the infotainment system
button (3), the screen will change to
the infotainment system screen.
[ Shift the gear to P (Park), the image
will turn off. Rear view
The rear image is displayed on the screen
when the gear is in P (Park) to assist in
parking. The rear view has a top view/
rear view/side view/3D view
Operating conditions
[
Shift the gear to R (Reverse), the
image will appear on the screen.
[ Press the Parking/View button (1)
while the gear is in P (Park), the rear
view will appear on the screen.
Off conditions
[ The image cannot be turned off when
the gear is in R (Reverse).
[ Shift the gear from R (Reverse) to P
(Park), the image will turn off.
[ Press the Parking/View button (1)
again while the gear is in P (Park) with
the image on the screen.
Page 495 of 638
Driver Assistance System
7-108
Surround View Monitor
Malfunction and Limitations
Surround View Monitor malfunction
When Surround View Monitor is not
working properly, or the screen flickers,
or the camera image does not display
normally, function is be inspected by an
authorized HYUNDAI dealer.
Limitations of Surround View
Monitor [ When the vehicle is stopped for a long
time in winter or when the vehicle is
parked in an indoor parking lot, the
exhaust fumes may temporarily blur the image.
[ The screen may be displayed
abnormally, and an icon will appear at
the top left side of the screen under
the following circumstances:
- The tailgate is opened
- The driver or front passenger door
is opened
- The side view mirror is folded
WARNING
[ ALWAYS look around your vehicle
to make sure there are no objects
or obstacles before moving the
vehicle. What you see on the screen
may differ from the actual vehicle’s
location.
[ The image shown on the screen may
differ from the actual distance of the
object. Make sure to directly check
the vehicle's surroundings for safety.
[ Surround View Monitor is designed
to be used on a flat surface.
Therefore, if used on roads with
different heights such as curbs and speed bumps, the image in the
screen my not look correct.
[ Always keep the camera lens clean.
If the lens is covered with foreign
material, it may adversely affect
camera performance and Surround
View Monitor may not operate
normally. However, do not use
chemical solvents such as strong
detergents containing high alkaline
or volatile organic solvents (gasoline,
acetone etc.). This may damage the
camera lens.
Page 501 of 638
Driver Assistance System
7-114
WARNING
Take the following precautions when
using Rear Cross-Traffic Collision-
Avoidance Assist : [ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ If any other system’s warning
message is displayed or audible
warning is generated, Rear Cross-
Traffic Collision-Avoidance Assist
warning message may not be
displayed and audible warning may
not be generated.
[ You may not hear the warning sound
of Rear Cross-Traffic Collision-
Avoidance Assist if the surrounding
is noisy.
[ Rear Cross-Traffic Collision-
Avoidance Assist may not operate if
the driver applies the brake pedal to
avoid collision.
[ During Rear Cross-Traffic Collision-
Avoidance Assist operation, the
vehicle may stop suddenly injuring
passengers and shifting loose
objects. Always have the seat belt on
and keep loose objects secured.
[ Even if there is a problem with Rear
Cross-Traffic Collision-Avoidance
Assist, the vehicle’s basic braking
performance will operate normally.
[ When Rear Cross-Traffic Collision-
Avoidance Assist is operating,
braking control by the function
will automatically cancel when the
driver excessively depresses the
accelerator pedal.
[ Rear Cross-Traffic Collision-
Avoidance Assist does not operate
in all situations or cannot avoid all collisions.
[ Rear Cross-Traffic Collision-
Avoidance Assist may warn the
driver late or may not warn the driver
depending on the road and driving conditions. [
The driver should hold the
responsibility to control the vehicle.
Do not solely depend on Rear Cross-
Traffic Collision-Avoidance Assist.
Rather, maintain a safe braking
distance, and if necessary, depress
the brake pedal to reduce driving
speed or to stop the vehicle.
[ Never deliberately operate Rear
Cross-Traffic Collision-Avoidance
Assist on people, animal, objects,
etc. It may cause serious injury or
death.
CAUTION
The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when: - The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function
Information
If braking is assisted by Rear Cross Traffic
Collision-Avoidance Assist, the driver
must immediately depress the brake pedal
and check vehicle surroundings. - Brake control will end when the
driver depresses the brake pedal with
sufficient power.
- After shifting the gear to R (Reverse),
braking control will operate once for
left and right vehicle approach.
Page 510 of 638
07
7-123
WARNING
[ Reverse Parking Distance Warning
is a supplemental system. The
operation of Reverse Parking
Distance Warning can be affected
by several factors (including
environmental conditions). It is the
responsibility of the driver to always
check the rear view before and while parking.
[ Your new vehicle warranty does not
cover any accidents or damage to
the vehicle due to the malfunction of
Reverse Parking Distance Warning.
[ Pay close attention when driving
near objects, pedestrians, and
especially children. Some objects
may not be detected by the
ultrasonic sensors, due to the objects
distance, size or material, all of
which can limit the effectiveness of
the sensor.
Limitations of Reverse Parking
Distance Warning [ Reverse Parking Distance Warning
may not operate normally when:
- Moisture is frozen to the sensor
- Sensor is covered with foreign material, such as snow or water
(Reverse Parking Distance Warning
will operate normally when such
foreign material are removed.)
- The weather is extremely hot or cold
- The sensor or sensor assembly is disassembled
- The surface of the sensor is pressed hard or an impact is applied with a
hard object
- The surface of the sensor is scratched with a sharp object
- The sensors or its surrounding area is directly sprayed with high
pressure washer [
Reverse Parking Distance Warning
may malfunction when:
- Heavy rain or water spray is present
- Water flows on the surface of the sensor
- $ I I H F W H G E \ D Q R W K H U Y H K L F O HT V
sensors
- The sensor is covered with snow
- Driving on uneven road, gravel roads or bushes
- Objects that generates ultrasonic waves are near the sensor
- Installing the license plate differently from the original location
- The vehicle bumper height or ultrasonic sensor installation has been modified
- Attaching equipments or accessories around the ultrasonic
sensors
[ The following objects may not be
detected:
- Sharp or slim objects, such as ropes,
chains or small poles.
- Objects, which tend to absorb sensor frequency, such as clothes,
spongy material or snow.
- Objects smaller than 100 cm (40 in.) in length and narrower than 14 cm
(6 in.) in diameter.
- Pedestrians, animals or objects that are very close to the ultrasonic
sensors
[ Parking Distance Warning Indicators
may be displayed differently from
the actual detected location when
the obstacle is located between the
sensors.
[ Parking Distance Warning indicator
may not occur sequentially depending
on vehicle speed or obstacle shape.
[ If Reverse Parking Distance Warning
needs repair, function is be inspected
by an authorized HYUNDAI dealer.
Page 515 of 638
Driver Assistance System
7-128
[
Forward/Reverse Parking Distance
Warning may malfunction when:
- Heavy rain or water spray is present
- Water flows on the surface of the sensor
- $ I I H F W H G E \ D Q R W K H U Y H K L F O HT V
sensors
- The sensor is covered with snow
- Driving on uneven road, gravel roads or bushes
- Objects that generates ultrasonic waves are near the sensor
- Installing the license plate differently from the original location
- The vehicle bumper height or ultrasonic sensor installation has been modified
- Attaching equipments or accessories around the ultrasonic
sensors
[ The following objects may not be
detected:
- Sharp or slim objects, such as ropes,
chains or small poles.
- Objects, which tend to absorb sensor frequency, such as clothes,
spongy material or snow.
- Objects smaller than 100 cm (40 in.) in length and narrower than 14 cm
(6 in.) in diameter.
- Pedestrians, animals or objects that are very close to the ultrasonic
sensors [
Parking Distance Warning Indicators
may be displayed differently from
the actual detected location when
the obstacle is located between the
sensors.
[ Parking Distance Warning indicator
may not occur sequentially depending
on vehicle speed or obstacle shape.
[ If Forward/Reverse Parking Distance
Warning needs repair, Forward/
Reverse Parking Distance Warning is
inspected by an authorized HYUNDAI
dealer.